Question about Pioneer DEH-P3100 CD Player

1 Answer

Right side speakers do not function

I have checked all connections on all wires, they are all connected and they all match on neg/pos. What's the problem? Is it with the stereo itself? I have checked the balance and fader as well.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

Have you checked the speaker wire for breaks or shorts?

Posted on Oct 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to install kenwood kcd mp238 cd player into a 1996 Ford Expedition. I need to know wiring data to connect the wires of cd player to harness, which colors should I match wires up to, so I can just...


Black Ground, yellow, battery, red switch battery, blue not used, blue white power antennea/amp, brown tel mute, white black front left neg, white front left pos, gray black front right neg, gray front right pos, green black rear left neg, green rear left pos, purple black rear right neg, purple rear right pos

Oct 24, 2012 | Car Audio Receivers

1 Answer

I bought a metra wiring harness for my 93 mustang to put in an aftermarket stereo..stereo powers up but can not get sound to speakers..i triple checked all wires i spliced..all colors match..any...


Don't know the model. Be aware that Ford is whimsical when it comes to color codes and even varies from model to model. Whichever pair the adapter uses for the left door speaker, connect the + wire to the ORG/LT GRN wire and the - wire to the LT BLU/WHT wire. For the right door speaker, connect the + wire to the WHT/LT GRN wire and the - wire to the DK GRN/ORG wire. For the left rear speaker, connect the + wire to the PINK/LT GRN wire and the - wire to the PNK/LT BLU or TA/YEL wire (same wire). For the right rear speaker, connect the + wire to the PINK/LT BLU wire and the - wire to the DK GRN/ORG or BRN/PNK wire (same wire). REMEMBER, the colors of the Metra adapter may not match what's in your car

Sep 27, 2012 | Car Audio Receivers

2 Answers

When the volume is turned up past 30 the sound shorts out and breaks up on my KD-R200


Well if say ur volume doesnt go much past 30,,they usally do called distortion,,but if your cd volume say goes to a 100 and it doin that @ 30,,could be a speaker wire touchin ,,another,,or channell goin out,,I would take it and make sure connected good and pos and neg correct,,goodluck

Nov 18, 2010 | JVC AM FM CD DET FACE CAR STEREO

1 Answer

Need color code for kenwood kdc mp 245


black - ground, red - switched or ignition, yellow - constant (memory) power, white - left front spkr pos., white/black - left front spkr neg., gray - right front spkr pos., gray/black right spkr front neg., purple - right rear spkr pos., purple/black - right rear spkr neg., green - left rear spkr pos., green/black - left rear spkr neg, blue - antenna remote, blue/white amp remote turn on.

Nov 02, 2010 | Kenwood KDC-325 CD Player

1 Answer

What is the name of the plug and wire connections of a car cd player called, which is found at the back of the unit which connects to the speakers


Its called a harness. You have to get one that match your vehicles harness and since the wires are color coded, connections will be easy just remember if your spare wires are dimmer neg. and pos. dont wired them together, cover them with electric tape individually so it wont short the head unit.

May 26, 2010 | Pioneer DEH-P6800MP CD Player

1 Answer

Red,yellow and blue with stripe hooks to what into harness


some decks have a solid blue for power antenna and blue with white stripe for amp turn on. if you have neither a power antenna or amplifier, i would not worry about connecting those two wires. do makes sure they are capped off and have no bare wires showing, as they are hot when the stereo is turned on.

May 05, 2010 | Pioneer DEH-P2900MP CD Receiver...

1 Answer

How do i test my pioneer p6400. I'd like to see it power up and not install it. In other words, just connect it directly to the battery to see if it lights up


Connect the RED and YELLOW Wires Together and Put them on the POS Battery Terminal and Either Use the BLACK WIRE or the CASE ITSELF to GROUND it On the NEG Terminal this is How you get what you are asking. WARNING::: -> bE sure yOU hAVE tHE power leads fused TO pROTECT AGAINST CATASTROFIC FAILURE

Mar 27, 2010 | Pioneer DEH-P6400 CD Player

1 Answer

Will a amp work with this deck


you can get a amp to work on any deck although u may have to rig it a little bit all u need is sound coming from the stereo and if u will take the rca one end and cut it and strip it u have a wire inside each one and then u have ground wires surrounding the inside wire twirl them up like 1 wire and then strip back the inside wire hook that one to front left pos wire and hook ground wire to front laft neg and do the other rca wire the same just hook it uo to front right or if it has rca jacks on the back of the stereo just hook ur rca wires into them and to the amp

Feb 24, 2010 | Pioneer DEH-1600 CD Player

2 Answers

Shuts of when radio volume is above 24


check to make sure the ohms rating on the speakers is correct. should be equal to or higher on speakers compared to receiver.

Mar 11, 2009 | Kenwood KDC-MP235 CD Player

Not finding what you are looking for?
Pioneer DEH-P3100 CD Player Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Pioneer Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...