Question about Washing Machines

2 Answers

Fisher/Paykel Smart-drive 5.5 auto washing machine was on final spin cycle and starte making unbalanced load noises. I stopped it,redistributed load and tried to restart. It restarted in spasms so I took the clothes out and tried to restart the full cycle. It tries to fill in spasms -- as though the tap is being turned off every few seconds ... so I left it alone and am seeking help ...

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi i turn on the wasing machine set the settings and press start -nothing happens -no water running can someone please help?

Posted on Aug 10, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 169 Answers

Sound like the controller opr micro board is sick. unplug leave off for a few minutes then power up again and try empty wash cycle if its the same call the engineers.

Posted on Apr 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fisher & Paykel Aquasmart washing machine makes loud banging noise then stops during rinse/spin cycles


Your Aquasmart machine requires 4 new suspension damper rods & 4 top bands, these are a common problem for AquaSmart machines.

Feb 02, 2013 | Fisher and Paykel Washing Machines

1 Answer

Continues to go out of balance


The stainless steel bowl has lost its ballast water & goes out of balance,Replace faulty bowl.

Oct 03, 2012 | Fisher Paykel Fisher & Paykel AquaSmart...

1 Answer

Every wash, the machine on rinse/spin cycle, makes a clicking noise and gets out of balance. I have tried to balance the machine and this has not worked. I need to manually redistribute the washing load a...


Hi Sandra, I'll have a look into this. This machine isn't my usual brand, so I'll have to see what I can find out for you. I'll get back to you by tomorrow :) Joe

Oct 04, 2011 | Fisher and Paykel Fisher & Paykel Washer

1 Answer

Unbalanced load- spin cycle stopped . cannot get machine to start


Hi just read your posting .Do you still require help?If so reply back and I am sure I can help you.

Jul 12, 2010 | Fisher and Paykel IWL12 Top Load Washer

1 Answer

My washing machine is ALWAYS off balance. I have tried adjusting the nobs on the bottom several times...a level always reads the machine is level.


Hello, the possible cause is if there is a thumping noise during spin cycle, the loads of clothes has probably gotten unbalanced, and what you will need do is to open the lid, redistribute the clothes in the washer, then restart it, repeat these steps if necessary.
Thanks

Jun 10, 2010 | Fisher and Paykel GWL11 Top Load Washer

2 Answers

Whirlpool washing machine make loud noise after spin cycle quits. Noise continues until cycle winds down. Sounds like a machine gun being fired


Hello,have to tell you that most noises from a washing machine occur during the spin cycle. If you hear loud thumping noise during the spin, the load of cloth may have become unbalanced. Stop the washer and redistribute the cloths, then restart the machine. Repeat these steps if necessary.

Thanks



Jun 04, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Makes loud noise when on spin cycle


Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.

Jan 09, 2010 | Amana 3.2 cu. ft. Top-Load Washer

1 Answer

Vibration of wash machine


Hi!

Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary. If there's a loud thumping noise during the spin cycle, the load of clothes has probably gotten unbalanced. Open the lid, redistribute the clothes in the washer, then re-start it. Repeat these steps if necessary.

Please do accept this solution and revert for further assistance.


Thanks

Rylee

May 22, 2009 | Danby Washing Machines

1 Answer

Washing machine


motor is starting to wear out ,replace it .

Oct 01, 2007 | Fisher and Paykel GWL11 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

325 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...