Question about JVC AV-65WP74 Rear Projection Television

1 Answer

HELP I FIGUERED OUT MY CONVERGENCE (RED) IS NOT WORKING PROPERLY. IT DOES NOT MOVE LEFT TO RIGHT, BUT DOES GO UP AND DOWN. IM NOT REALLY THAT GOOD ON FIXING THINGS I JUST WANT TO KNOW WHAT PARTS SHOULD BE LOOKING OUT FOR ONCE I CALL THE REPAIR MAN. I DONT WANT TO PAY TOO MUCH MONEY TO GET IT FIX AND I JUST WANT TO BE ABLE TO THROW THE RED FLAG UP IF HE COMES UP WITH SOME BOGES ITEMS FOR ME TO PAY FOR.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • JVC Master
  • 8,617 Answers

You need two STK392-110 ICs that cost 20.00 each and take about 30 minutes to install. However the tech is going to charge about 400-500 for the repair. Heres a link where you can order the parts and recieve the step by step instructions on how to install them yourself. its very easy just minor soldering. Heres the link if you want to save on the repair bill.
http://servicemanuals.vstore.ca/

Posted on Apr 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi in the convergence to adjust the color the red is above the plus sign in 3 spots and will not come down and they are not straight


does the blue convergence crosshairs move up and down left and right? Does the red move left or right. does the red move up at all. this might indicate a faullty resistor, bad ic or just bad convergence data. let me know i am here to help

Nov 04, 2010 | Toshiba 43A62 43" Rear Projection...

1 Answer

Mitsubishi WT-42413 Red Convergence will not move left right


U check all the resistors with the Ohm Meter?All the resistors u check it in tolerance?Resolders all the resistors,so it make good resistance for the ICS?U do all these steps,u still have problems,Ur ICS some how it shorted it dead,again.

Apr 02, 2010 | Mitsubishi WT-42413 42" Rear Projection...

1 Answer

My tv needs to be converged but i can't


the left and right volume buttons are what move the convergence horizontally, so if they dont move you will need to replace the convergence ICs .if you need more info I will need the model number of your JVC

Mar 13, 2009 | JVC Televison & Video

1 Answer

Philips 60" hdtv. Convergence problem


what is the model number of your set and I will be able to help you with your problem.

May 07, 2008 | Sony KP-41T65 41" Rear Projection...

1 Answer

Mitsubishi WS55809 "red" converge problem


Proper description is convergence IC ...part # STK392-570...
there are two in model # WS 55809...replace both.......T.

Jul 30, 2007 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

Tuning Promblem


You have the typical convergence problem my friend. This is going to involve getting a service manual, locating the two convergence IC's. Then you will need to unsolder then from the printed circuit board. Then you will need to put heat sink compound on the new IC's before you replace them, then most likely, have to do some touch up convergence alignment through the service menu. If you have no solid state repair experience working on printed circuit boards, play it safe and call in a pro to assist you in this repair. Good Luck

Jun 05, 2007 | Hitachi 50DX01B 50" Rear Projection...

1 Answer

No horizontal red convergence control


Probably the red convergence output IC has failed. The chip is basically a stereo amplifier that serves as a horizontal amplifier and a vertical amplifier. I suspect the vertical part has failed and is not uncommon. Should be generic STK392-150's or maybe STK392-110/120 I believe. By the way when the line moves up and down that means the vertical is working when it moves side to side the horizontal is working.

Feb 03, 2007 | Philips 60PP9202 60" Rear Projection...

Not finding what you are looking for?
JVC AV-65WP74 Rear Projection Television Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

easy alberta
easy alberta

Level 2 Expert

132 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...