Question about Office Equipment & Supplies

1 Answer

Store blank forms on a Xerox Workstation and fill it in with data from a PC and print it

Posted by on

  • mmarlow Apr 23, 2008

    Little more complicated. The form needs to reside on the printer. The software being used sends patient data to the printer, the data then prints in the correct spaces. This used to be done with ELF DIMM's on HP 4000's. Supposedly there is a way to do it with forms on a hard drive but Xerox is not very forthcoming with the info.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

You need to take measurement of data unless you can use a template

Posted on Apr 22, 2008

  • Ginko
    Ginko Apr 22, 2008

    the best thing to do this is using a software like avery print designer (link here)

    You can also do it with a ruler, without using any software, and then build an Excel doucument with cells in the right position, but it is more difficult.

    You will need to print several test pages before getting a good result.

  • Ginko
    Ginko Apr 22, 2008

    This software instead is free, check it out

    Form Design SoftwareAnother way to design and print software is using Microsoft Access



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My xerox 700 is printing and copying everything in cyan, when selecting color

Probably corrupt drivers.
Does it do it with all file formats, PDF, Word etc?

Feb 17, 2016 | Xerox Office Equipment & Supplies

1 Answer

Solutions to 16-593.00 in xerox workstation 5755

That error signifies that the machine is set to DHCP but cannot resolve an IP address from your network. Normally you would assign a static IP address on your printer. I would recommend setting a static IP address with subnet and Gateway that correspond to your network. That should resolve this error.

Jan 05, 2016 | Xerox Office Equipment & Supplies

1 Answer

Xeroc docu color 250

If you are printing from an Adobe product make sure you are printing as image and let the printer manage the colors. Also, try calibrating and updating the machine through Command Workstation which can be downloaded for free from Download the updates by going to the Fiery web interface by typing the ip address of the copier in the web browser and going to the configure tab and clicking on check for updates. Make sure you install them in order and reboot the machine in-between updates. ALSO, you can import the file directly into the fiery by using command workstation avoiding any driver complications.

Jan 15, 2014 | Xerox Office Equipment & Supplies

1 Answer

How do I clear the completed print job list on the Xerox workstation 7328

To delete ALL print jobs:
Turn OFF. Let it power down all the way, wait 10 seconds.
Hold Energy Saver + 6 + Stop.
Turn ON.
Release buttons after Xerox logo appears.

Nov 22, 2010 | Xerox WorkCentre 7328 Multifunction laser...

1 Answer

I have a Xerox dc 3535 that I need to set the admin password on (don't even know what it was) how do i do that?

The default password is "11111", via Workstation CWS the admin password is just blank.

Oct 08, 2010 | Xerox DocuColor 3535 Copier

1 Answer

First 30 pages of a print run after 24hrs idle are blank

don't upgrade the xp, it runs a limited version to ensure that the command workstation works ok. A reload is probably in order to start again. Any updates can generally be found on the xerox website, and installed via command workstation

Aug 09, 2008 | Xerox DocuColor 12 Color Copier

1 Answer

Phaser 8550 cyan doesn't print

If you go to the site and click support and drivers. enter phaser 8550 and there is a printhead update you need to get, You have to fill out a form.
That may be your problem since there is no fault code.

Apr 13, 2008 | Xerox Phaser 8550DX Laser Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts


Level 3 Expert

8016 Answers


Level 3 Expert

2237 Answers


Level 3 Expert

78257 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides