Question about RCA DRC8030N

1 Answer

Blue screen answer

Have you solved your drc8030n problem ... mine is doing the same thing plus the time is also changing whenever it desires ...

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 106 Answers

Blue screen. Most likely the progressive scan is ON. you need to press the "Video Out" small round button on the remote to turn off the progressive scan.

Posted on Jun 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I NEED POWER SUPPLY BOARD FOR DRC8030N


I am sure that the fault was relative of the bad capacitor and swapping the working board has proved. Hope that solves the issue as all what is needed is to check and replace all the suspected capacitor is the Primary /Secondary side as the SMPS is working BUT with a limited voltage. So the threshold is low and so can be a tank capacitor, change the mains capacitor and also the secondary +B side.

Dec 02, 2011 | RCA DRC8030N

3 Answers

2200mf 6.3Volt caps for the RCA DRC8030n DVD recorder where do I find them and what is the cost per cap , looked in my unite and two of the caps are swelled up.Heres my email address seadevil...


I have plenty of spare power boards so you can replace the whole board vs. components. I can have one shipped at $10 plus shipping.

Oct 03, 2009 | RCA DRC8030N

1 Answer

I have the RCA DRC 8030n and it works the but its not showing the picture in color. This issue just started about 4 days ago one time it flashed on but now its in black & white not returning to color.


It was a simple solution I just started where anyone one should and I check the cables in the back of my tv and the back of the rca unit. The problem was that the blue component cable leading to the tv was not all the way connected, once I plugged it all the way that solved my problem.

Jul 09, 2009 | RCA DRC8030N

1 Answer

Larger Hard Drive in DRC8030N


Yes you can replace the hard drive with a larger one. I have a 500 gig hard drive in mine. You can do the same thing with the DVD drive.

Any more problems, contact me at bigsteve1962@excite.com

Feb 26, 2009 | RCA DRC8030N

2 Answers

Drc8030n Motherboard


Thank you so much for sending me those parts, and an extra thanks for the extras. Which happens to be what I needed to fix my problem. You won't believe it... I got your well-packaged parts today. I soon replaced the Motherboard, no change, still the same HELLO... I was so deceived... Then, I decided to replace the Power Supply, just in case... IT WORKED!... (thanks for sending me a free power supply)... Looking at my power supply, I can see that on the printed circuit under those 3 diodes, near the transformer, is an area that seems to have overheated. I will test it and give you the results eventually, as well as the results and solution if I can fix the DVD burner. I'll use the extra fan you so generously gave me to cool the power supply, seems like it won't hurt. Though I have to place it right, or it'll make the problem worse... Seems like anything wrong with this DVR and all it'll do is display HELLO... I've heard of a bad DVD Burner, a bad Motherboard and now a bad Power Supply that causes the HELLO... Thank you so very much GSAN, you did it... I recommend you to everyone out there for your fairness, kindness and devotion. We should call you Mr. FixYa!...

Nov 01, 2008 | RCA DRC8030N

1 Answer

Can It get a Virus?


You can try to reset the unit by pressing and holding the play and open buttons for like 10 seconds ( do this while there is no DVD inside and while in the main Menu screen....also, you will loose ALL data when this is done). If this does not change the problem, then it is most likely due to a power issue. I have corrected this problem by swapping out the power assembly in the unit. If interested in a unit (it is a unit that is stuck on the HELLO issue..so non-working) that can be used for parts, then contact me at www.suncitybargains.ecrater.com

Jul 24, 2008 | RCA DRC8030N

1 Answer

Constant hello's


Constant hello is most likely the DVD drive. if you have a spare, then I would recommend replacing it (it is a computer drive so any will work). If you do not have a spare, then you can go to Ebay or Ecrater and purchase a used DVD drive and pop it in. It is failry easy to do.

Apr 26, 2008 | RCA DRC8030N

1 Answer

Says hello


This is the power on procedure. Once it goes out, then press the poer button. If all you get is a blue screen, then turn off the progressive scan by pressing the small round button on the remote that is labeled "video out"

Apr 19, 2008 | RCA DRC8030N

7 Answers

Drc8030n says hello


Are all the cords connected? Is there any disk in? Make sure theese are all done

Nov 29, 2007 | RCA DRC8030N

Not finding what you are looking for?
RCA DRC8030N Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA DVD & Blu-Ray Players Experts

The Knight
The Knight

Level 3 Expert

68368 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4761 Answers

Are you a RCA DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...