Question about Audio Players & Recorders

Open Question

TRUST 5.1 SURROUND SOUND SP-6600A REMOTE CONTROL HAS STOPPED WORKING I HAVE CHANGED THE BATTERY I AM NOT SURE IF ITS THE REMOTE OR THE RECIEVER THATS FAULTY CAN YOU HELP PLEASE

Posted by on

5 Suggested Answers

  • 298 Answers

SOURCE: Onkyo TX DS575x reciever remote problem

You might try this replacement
http://www.remotes.com/remotes/servlet/rs?a=gmi&uid=11953114154530&smodel=TXDS575&brand_pn=ONKYO_TXDS575

Posted on Nov 17, 2007

techman
  • 3130 Answers

SOURCE: no surround sound

So your saying that you have no rear channel. Some recivers use a single stereo output ic for both sides on the rear speakers. you could have a defect with this IC . Anther thing Im sure you check3ed the obvious ie : the switch is on suround sound? If there is a front to rear fader is it in the middle? Good Luck

Posted on Jun 04, 2006

SOURCE: yamaha reciever rx-v363

Thats because if you look in the owner's manual, it declares the fact that it will only broadcast sound from hdmi to monitor not speakers. For sound out of speakers need to connect additional audio cable.

Posted on Jun 12, 2008

  • 1 Answer

SOURCE: reciever only allows 2 channels(speakers) at a time.

Two solutions:
1. make sure you are sending a 5.1 signal to the receiver (my DVD player was configured to only send stereo even if I picked the 5.1 soundtrack, i had to fix that). Read the manual to see the indicator lights that would light up if you are sending a DTS signal or Dolby Digital.
2. Use the 'surround modes' to at least get pseudo surround

Posted on Feb 18, 2009

  • 239 Answers

SOURCE: remote code for sony playstation 3

you cannot control a ps3 with that remote because the playstation 3 only works with bluetooth. I'm sorry to have to tell you. you can purchase a remote that works with your system at any that sells your system.

hope this helped
please rate well.

Posted on Mar 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Onkyo ht-r530 subwoofer stopped working


Turn the out put leval down on your sub, End the reciever, I was turn up to high,End that will cause it to cut out.

Oct 20, 2012 | Onkyo Ht R530 Receiver 7.1 Surround Sound...

1 Answer

Problem with sp cable (yamaha)


The speaker cables are the ones that clamp or tighen down on the back of the reciever. All the spkr wires have to have the positive and negative leads correct. Also not aven one little strand of wire can be touching another conductor or you will have this problem. Make sure all leads are correctly ran and hooked up positive to positive and negative to negative from the back of the reciever all the way to the speakers. This should solv your problem.

Jul 25, 2009 | Yamaha HTR-6030 Receiver

1 Answer

Yamaha 5960


Does your reciever use a remote control?

If so, you should be aware that on many recievers and surround amplifiers some of the functions may only be accessible via the remote control (the best way to learn about it is to consult the user manual).

I have a Pioneer VSA-730 surround amplifier and the only way i can change the mix levels for surround/sub/center speakers is by a remote control. My friend had the same problem and, after reading the manual, he discovered that he actually needs to use the remote control to access all functions of the amplifier.

Good luck and best regards

3rq8 (Triarcuate)

Jul 15, 2009 | Yamaha HTR-5960 Receiver

2 Answers

Remote code for sony playstation 3


you cannot control a ps3 with that remote because the playstation 3 only works with bluetooth. I'm sorry to have to tell you. you can purchase a remote that works with your system at any that sells your system.

hope this helped
please rate well.

Mar 06, 2009 | Onkyo TX-SR606 Receiver

2 Answers

Can n ot get rear surrround speakers to work


On this reciever you have rear surround and rear back spkrs, if your using the surr back they have to be assigned if unassigned in the settings. If using rear surr spkrs change your surr field to 5ch stereo and your rear speakers will work.
There is no 7.5 unless you have 5 subs the 7 is the total number of speakers and the .1 is the number of subs in the system

Feb 02, 2009 | Denon AVR-1708 Receiver

1 Answer

How can I get all 5 of my speakers to work with no remote???


if it dose not have an opion to change specker setup on reciever''then you will need the remote''''

Jan 30, 2009 | Pioneer VSX-D510 Receiver

2 Answers

Reciever only allows 2 channels(speakers) at a time.


I had this problem too. Finally, after using the MCACC setup and making sure all the speakers worked, I found I had to set the source to FM, TV or whatever from the remote control and set the mode to advanced surround sound using the front panal button on the upper right. Had to fool with them a lot. Good luck.

Jan 03, 2009 | Pioneer VSX-818V-K Receiver

2 Answers

Center and surround speakers work, but front right and front left speakers do not put out any sound


I had the same problem. Set the reciever on 6 channel stereo. On this setting, you should be getting the same sound out of each speaker. Isolate which speakers aren't getting sound. Now, on your speaker switch (the A/B button), select A. If that doesn't fix it, select B. If that doesn't fix it, try A and B (if you can on your reciever).

Now, when you switch back to pro-logic, make sure your a/b channel switch is in the position that worked in 6 channel stereo. Yamaha recievers have a memory, and when you switch various modes, it makes auto adjustments based on what you had set in the past.

Hope this helps

Dec 21, 2007 | Yamaha HTR-6030 Receiver

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

98796 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69739 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...