Question about Computers & Internet

2 Answers

How do i access the email address for my internet tv setup as i bought it 2nd hand with no email address

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,463 Answers

Hi

have you created an account for an email address? on the tv.
if not create an account then you can access the email's.

riz.

Posted on Apr 22, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 85 Answers

Gabi,

check the back of the tv as you will see the manufacturer's web site perhaps with the tv's model number

browse the site to get all posible information about your 2nd hand tv.i think that will help

Posted on Apr 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is it possible to delete VERY old account on qeep mob without access to email or password? i want to remove my old profile pic form internet...


You will need your passwords to change any settings. I doubt they can help either as the account is setup on your old email address. Why not re start your old email address and email the company for a new password.

Jan 29, 2017 | The Computers & Internet

1 Answer

I can't access my blocked account with given code on my laptop


Hi,
Setting up a personal email account
Your BlackBerry smartphone allows you to send and receive email from up to 10 supported email accounts.
You can set up your email account from your BlackBerry smartphone or your computer:
To set up your personal email account from your BlackBerry smartphone:
Add email accounts, including Yahoo! Mail, Gmail, AOL, and Windows Live Hotmail, directly from your smartphone in just a few easy steps.
To set up your personal email account on a BlackBerry smartphone with BlackBerry 7 OS or BlackBerry 6 OS:
From the Home screen click the Setup icon
Select Email Accounts
Select Internet Mail Account, and follow the screens to set up your email address.
To set up your personal email account on a BlackBerry smartphone with BlackBerry Device Software v5:
From the Home screen click the Setup icon.
Select Setup Wizard.
On the email setup screen, select I want to create or add an email address.
Follow the screens to set up your email address.

Thanks

Email Support

Feb 04, 2014 | hotmail.com

1 Answer

Cannot access my 2nd email address


Hello. You might like to check your mail server addresses, both incoming and outgoing. It might look like "mail.isp.com"

Jan 14, 2012 | ASUS Computers & Internet

1 Answer

I have a NetGear router set up as a primary router connected to the modem but it was giving me problems with WiFi. I bought Bellkin f7d4302 to use for reliable WiFi connection and also to connect my main...


Hi,

I got your issue, I hope you are trying to connect the 2nd router to the first router through LAN-LAN connection (i.e, LAN port of the first router is connected to the LAN port of the 2nd router)

Then you need to change the ipaddress of the 2nd Play Wireless router . Please follow these steps.

1. Connect the computer-router with ethernet cable and open up internet explorer and clear the address box and type in 192.168.2.1 and hit enter.

2. You will be logged into the Belkin router setup page, in the Left hand side under LAN setup click on LAN settings

3. It will ask for Login password, leave it blank and click on submit

4. Change the LAN ipaddress from 192.168.2.1 to 192.168.5.1 and click ok

5. The page will say cannot be displayed, then clear the address box and type in http://192.168.5.1 and hit enter

6. If your first router is connected to the internet , then automatically the internet status will says connected

7. You will be able to go online wired

Good Luck!
Thanks in Advance!

Regards,
Prema

Dec 29, 2010 | Belkin Wireless Play Router (F7D4302)

1 Answer

I have 2 wireless routers cascaded with each other... looks like they are having a problem because of their IP address... how do I change the IP address of the 2nd router which is not attached to a...


Wired the 2nd router into another computer ( you only need the power and an ethernet cable into the #1 port of the router )

reset and power cycle the router. then type 192.168.1.1 into the address bar of your internet browser. type admin on the password field, leave the username blank.

-->if you like to setup the router as only an access point
  • on the setup page of your router, disable the DHCP server and change the LAN ip of the router to 192.168.1.5
  • go to the security tab and uncheck all the filters (don't forget to save the settings )
  • go to the wireless tab and personalize the wireless network settings
  • plug a cable into the ethernet port ( 1,2,3 or 4) of main router and plug the other end to the ethernet port on the 2nd router
  • power cycle everything and you should be good
-->if you don't want to router to act as an access point
  • just changed the ip to 10.10.10.1, save the settings
  • go to the wireless tab and personalize the wireless network settings
  • plug an ethernet cable into the ethernet port on the main router, connect the other end to the internet ( yellow ) port of the 2nd router
hope this helps

Sep 04, 2010 | Linksys Wireless-G WRT54GS Router...

1 Answer

How to setup laptop and desktop pc network using nexswitch sd080s router i have a samsung r60 laptop on vista and a desktop on xp . i have made sure they have the same workgroup name but i cant get them to...


What you have is not a router, it is only a switch. You need a router to get multiple PCs setup to access Internet. To help understand, a router can be a switch, but typically a consumer level switch is not a router. Workgroup name doesn't matter for accessing Internet, only for PCs to access each other's files.

You need to buy a router and use it instead of the switch. The router will be able to hand out multiple IP addresses with something called DHCP. This is the reason your current setup does not work, as you are only getting one IP address from your ISP, and the first PC to come online gets it, leaving the other with none. A router will hand out many addresses and then translate back to the ISP.

As far as a link, whatever router you buy will come with a manual for setup. The process is very simple.

Dec 02, 2009 | Computers & Internet

1 Answer

Connection issue


Hi! I believe your having some issue with your router and I will be more than glad to assist you in this concern..Time warner cable is your isp and if the computer is connected directly to the modem, you have a perfect internet connection but if you are going to connect the cable from your modem to the router and you connect your computer to port 1 to 4 of your router it will not give u an internet connection. This is what we are going to do.
1. connect your computer that can get an internet connecttion thru time warner cable to the router on port1.
2. pull up a browser and type in the default gateway of the router, to check the default gateway of the router, right click the network icon on the lower right of the task bar and click status and it will show the ip address, subnet and default gateway, ex the default gateway is 192.168.1.1, u are going to type in the default gateway ip address to the url of the browser.
3. It will ask u for the username and password, by default the username is admin and the password is 1234 or just leave it blank.
4. It will pop up the setup page of the router and you have to look for the setting for doing a mac clone, you need to clone the mac address of your pc that can connect to the internet thru time warner cable modem.
5. once its done, save the settings and on the internet connection settings, manualy configured it to auto-dhcp. save the settings.
6. once its done..unplg the power of the computer, router and modem.
7. cable connection should be, cable from the modem goes to the WAN port of the router and connect cable on port 1 of the router to your computer on the lan port.
8. Plug in 1st the power of the cable modem, once all lights are lit then plug in the power of the router, once all lights are solid on the router, like the power, WAN, u will notice that there is no light on the port1, computer is still off, once the computer is on port1 will lit, then power on the computer..once computer is completely boot up, pull up a browser and it should gives u an internet connection.
9. Once you have an internet connection, u can access again the setup page of the router to setup the wireless connection settings.
10. If you are going to connect another to the existing router that is conneted to the time warner cable. that is possible, but before u connect the 2nd router to the 1st router..
a. connect the 2nd router to a computer to set it up..you have to access the setup page of the 2nd router.
b. once you access the setup page, there is a menu for the lan settings that is for the router side. u need to change the 3 octet of the ip address of the 2nd router. ex your 1st router ip address is 192.168.1.1 and the 2nd router ip address is 192.168.1.1 to change the 3 octet of the 2nd route, the 2nd router ip address should be 192.168.2.1. then save the settings..
c. the router will reboot and need to access the setup page of the router by using the 192.168.2.1 and u can set the wireless connection settings.. once its done..
d. cable connection should be---cable from the time warner cable goes to the WAN port of the 1st router, connect a cable to port 4 of the 1st router going to the WAN port of the 2nd router.. this process is called cascading two routers on a network.. this should work.. good luck

Aug 16, 2009 | ViewSonic (DHWMG120) Router

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...