Question about LG LDF6810ST Stainless Steel Built-in Dishwasher

2 Answers

Lg ld2131sh dishwasher makes a constant, metal on metal grinding sound

Posted by on

  • Anonymous Mar 30, 2014

    Please help

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 112 Answers

If you’re hearing a fast knocking or a fast grinding sound, then it is your motor going bad. This will result in an LE code and the unit will no longer work as this gets worse.
You can get a replacement sump assembly that has the motor and all new sensors to resolve this issue.
Good Luck.

Posted on Jul 24, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You can purchase the main pump seperately and install yourself. The trick is to remove the "drum" section from the plastic base so that you can install the new pump easily.

Posted on Jul 30, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hobart sr24 dishwasher making a grinding metal on metal sound


Pump bearings, staff dropped a teaspoon down the inlet to the pump. You need a service engineer. Don't run it.

I have been in the hospitality for 45 years and seen it all. Our drain mechanism broke a month back and it was full of cocktail sticks. We just got a brand new machine.

May 18, 2016 | Hobart SR24-H Built-in Dishwasher

1 Answer

I had a constant grinding coming from front passenger tire. Replaced Caliper and put the worn pads back on for a day, the constant grinding went away. It would still grind while braking,hitting a bump


It sounds like the brake pads are metal to metal, when you turn the flexing of the wheel makes them touch the rotor and grind. This can rarely be caused by a badly worn wheel bearing as well, have both brakes and wheel bearing inspected.

Mar 02, 2017 | 1999 Pontiac Grand Am GT

1 Answer

LG LD2131SH Dishwasher displays a ie error


Hi santjiesfras,

The error code your receiving is an "Inlet Error" message. This means that no water is going into the Dishwasher. Please check the following:

1) Is the tap open.
2) Is the inlet hose kinked?
3) Is your water pressure fine? Because anything less than 0.3kgf/cm(bar) is not going to work

If all of the above is fine, then take off the inlet hose of the dishwasher, and clean the filter which is between the hose and machine (small circular filter). If still not working, then you will need to replace the inlet valve. I would suggest getting a L.G service agent to do so.

Good Luck :-) - J.Q

* If you found this solution helpful, please vote positively. A 4 four thumbs up will do nicely too :-)

Apr 13, 2011 | Dishwashers

1 Answer

We recently purchased a new pump for our frigidaire gld4355rf dishwasher. The old one started making grinding noises. When we moved the dishwasher it had leaked due to a failure of an interior seal. Our...


it could be a crinkle in the drain pipe or slight block, the pumps do make some sounds from time to time. it some time can even be the rubber grommets were the pump sits.

Jun 19, 2017 | Frigidaire GLD4355RF Dishwasher

1 Answer

Its makeing a loud grinding noise


bearings are possibly going out on the motor. If the sound is like metal grinding on metal then that's the problem. To repair it you will need to remove the dishwasher from under the cabinet and flip it upside down to access the motor assembly. Take the model # and serial # to an appliance part supply for proper motor replacement. It isn't hard to do if you have the time. Make sure the unit is unplugged and the water line has been disconnected before any repairs start.

Hope this helped you

Dave

Jan 18, 2010 | Amana 24 in. ADB1500AW Built-in Dishwasher

1 Answer

Have lg dishwasher LDF6920ST. Making lound grinding noise under machine,sound like gears grinding.


If the machine works fine other than the grinding sound, there is a blade that is in the center and grinds up residue, somtimes it gets a object in the
space and wont grind it up. If you are ok at taking things apart and puting back together, disasemble the center sprayer, screen and tube to top sprayer, the blade is under the screen housing. clean out and reasemble and should work fine. not hard to do really, when you reasemble do not tighten screws as you intall them as they allign everything, intall then all loose then tighten snug NOT to tight as they go into plastic.

Oct 17, 2009 | LG Dishwashers

1 Answer

LG dishwasher is making loud grinding sounds


debris in pump. unplug and disassemble pump. clean out and reassemble

Aug 26, 2009 | LG LDF6920ST Stainless Steel 24 in....

2 Answers

LG Dishwasher making grinding noise then blinking E1 code 10 minutes later


Well done by resolving this problem. The other way to avoid the siphoning problem through the drain hose is adding an air gap valve/connector (available at any hardware store). You can use it even if you don't have a garbage disposal in your kitchen sink. That will assure that you have the proper height of the drain hose.
Hope this helps!

Oct 22, 2008 | LG LDF6810ST Stainless Steel Built-in...

1 Answer

LG 3 in 1 Dishwasher model LD2131SH


E1=Water inlet Error

Not reached to the normal
water level in spite
of 10 min. water supply

Causes:

The Water Supply Tap is closed.
The Water Supply is shut off.
The Inlet Hose is kinked.
The Water Pressure is very low.
(below 10 psi)
Inlet Valve is OK?
The filter of Inlet Valve is clogged
by impure water.
The Hall sensor is OK?
The Impeller of Air Guide is bound

Solutions:
Take action on Water Supply
device.
Measure the electric resistance of
Inlet Valve. (950-1300 )
Clean the filter of Inlet Valve.
Check the frequency of Inlet Water
by the Test Mode.
Replace the Air Braker.

Aug 14, 2008 | LG 24 in. LDS 5811 Built-in Dishwasher

Not finding what you are looking for?
LG LDF6810ST Stainless Steel Built-in Dishwasher Logo

Related Topics:

497 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Dishwashers Experts

Mike
Mike

Level 2 Expert

166 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Mike

Level 3 Expert

4345 Answers

Are you a LG Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...