Question about Audio Players & Recorders

1 Answer

My AVG 8.0 says my e=mail scanner is not active, all other is active how can I make my e-mail scanner active

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,102 Answers

Hi in bottom right hand corner you have avg control center double click on this then click check for updates once this is done if its still not green and working then right click on email scanner then click properties then configure then defaults then ok this.
Now check if its running if not then right click again properties then help this will then tell you any settings and help you with this.
If still no luck then you might have to wait for an update as the new 8.0 has only just come out so might have few problems to start with so if you still have problem then send them an email but you might find it will update in the next day or two but get in touch with them if you have any concerns.

In the mean time ill find out what i can for you and post back here ok let me know how you get on ok

Posted on Apr 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Want to use my current speakers with a new surround sound system. Current system is 5.1 channels, rated at 100w per channel @ 8. Ohms. New System is rated 145watts, 5.2 channels at 6 Ohms. Will b ok?


Hi Ronald.
8 Ohm speakers will work just fine as replacements for the
6 ohm speakers. When fitting speakers you need to consider
The power handling capability. The impedance and the frequencies
involved. Power handling is expressed in wattage ie 100W.
Unfortunately this can be expressed in rms, max or peak music. The rms value (root mean square) is the only really relevant figure as this is the continuose handling power at 1 KHz. The impedance
is the resistance that the amp sees but is not a dc resistance and
varies with frequency. The lower the impedance the more power
will be drawn from the amp. In the event of a short circuit across
the speaker the amp will try to deliver infinite power into an infinitly
small load in an infinitesimal amount of time and will self destruct.
Using an 8 Ohm speaker draws less power than a 6 Ohm speaker.
Connecting speakers in parallel; results in the impedance beingreduced. For example two 8 Ohm speakers in parallel will result
in a 4 Ohm impedance load but in series will be 16 Ohms.
Incidentally the the .1 (5.1) is the sub woofer which only has
to handle the bass frequencies, a small percentage of the
amplifiers overall frequency response..
Connect your speakers and then power up the amp last
after double checking there are no shorts on the speaker
cables.
All the very best from Vintie.





Jan 07, 2017 | Audio Players & Recorders

1 Answer

My Bose 321 switches it self off after 5mins . How do I stop this.


Occasionally the system may have the sleep mode activated , we have come across this before. Reset the system completely.
Any issues.
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 06, 2017 | Bose Audio Players & Recorders

2 Answers

My p.c does not get any drivers for my sansui bluetooth headphones.


If you have other blue tooth devices working correctly, do a search for new devices on your blue tooth software. Pair the headphones using the blue tooth software.

Jul 15, 2015 | Audio Players & Recorders

1 Answer

I'm trying to locate a conversion plug, the subwoofer is a JVC powered sub . The connecter number is xv - thm 505. Next numbers are xv- thm 606 I need a female RCA to the sub 8 pin mini din W


not sure where you are based, but have you tried maplins electronics store? They tend to carry a large stock of lpugs and cables, plus they do seem to deal with audio equipment. Good luck.

Mar 20, 2013 | Audio Players & Recorders

2 Answers

Connect an active soundbar to a receiver


What if the soundbar is Bluetooth? Will I still be able to use that function and connect the active soundbar to the tv (Bluetooth) and connect the av receiver for other surround sound speakers? (they are pre-wired in the walls in the apartment I moved into)

Jan 08, 2013 | Audio Players & Recorders

1 Answer

Wailing sound when 1971 seeburg juke box is started


I amnot very familiar with Seeburgs but the trip switch activates at the end of the record playing and THAT mutes the amp. The amp should also be muted until the tone arm lands on the record. So I would suggest the problem is in the amp.

May 05, 2009 | Audio Players & Recorders

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

100304 Answers

 Grubhead
Grubhead

Level 3 Expert

4706 Answers

The Knight
The Knight

Level 3 Expert

71088 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...