Question about Frigidaire GLEQ2152ES Electric Dryer

1 Answer

Err68 dryer stops and said E68

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 4,323 Answers


Error E68 on Frigidaire dryer means that One of the keys (buttons) is stuck closed (active). Please check whether any button is pressed or stuck. Also try removing the lint filter and clean the contacts of the inside of the filter.
Try performing function test to check which button is at fault. Enter function test mode and perform key (button) test to determine which button is at fault. Carefully free the and perform the test again. If button is free but the key struck code still exists then you'll need to replace the electronic control.

Function Test--

1. Press and hold Select and Cancel buttons simultaneously for 6 seconds to reset the control. The buzzer will sound 1 time and “rES” will be shown briefly in the display.
2. Immediately after, rotate cycle selector knob 5 turns counter-clockwise to the second position from the bottom. Press and hold the Options and Cancel buttons simultaneously for 2 seconds. The control will enter test mode, the buzzer will sound 3 times and all LED’s will rapidly flash.
To EXIT test mode, press and hold the Select and Cancel buttons simultaneously for 6 seconds or disconnect power from dryer. Dryer will be reset for regular operation.

Please post back for any further assistance.


Posted on Jul 22, 2010

  • lvbr Nov 20, 2010

    THANK YOU!!!! I was going INSANE with the constant beeping. I thought my dryer was possessed.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What does code E68 mean?

Hello Erik;

My name is Peter. I am a retired field service appliance technician.

The code E68 appears when one of the buttons on the keypad is stuck in the down position. This is a common error with several different Frigidaire dryer models and tends to occur when the dryer is five or more years old. You may be able to un-stick the offending key manually. If not, you will need to replace the entire keypad.

Dec 08, 2014 | Frigidaire Dryers

1 Answer

Frigidaire affinity LEQ6000ES2 error code e68...dryer will not start

Good Afternoon David,

I understand that your Frigidaire Affinity dryer, model# LEQ6000ES2, is showing you an error code of E68 and will not start. I also see that you have changed the thermal limiter. Looking at what the E68 error code means, a key or button stuck, there could be something else causing the code to come up. I suggest contacting your local authorized technician for further assistance. They will be able to diagnose your appliance, determine what is causing the E68, and repair your dryer. Hope this is helpful.

-Best Regards-

Jul 04, 2014 | Frigidaire Dryers

1 Answer

Aeq6700fso dryer dryness button won't change the

E68 is a stuck button on th control panel

If you need further help, reach me via phone at

Nov 06, 2012 | Dryers

2 Answers

E68 error message

The code is for a stuck button on control panel. You will need to replace the control panel

May 16, 2010 | Frigidaire GLEQ2152ES Electric Dryer

1 Answer

The dryer gives E68 it starts running dor 30

the code 68 on the aeq7000es series is indicative of stuck buttons [your control buttons on the front]They sometimes stick in the closed position or go open [fail] and I have found the bad switch and replaced just the bad switch[ there should be a series of test to determine which switch button is bad] and if the switch buttons are testing good ,then it's control panel time. The control panels are about $150.00 on ebay ,sometimes you can find a "make offer" deal,but their few and far between.

Nov 18, 2009 | Frigidaire AEQ7000ES Dryer

1 Answer

I have an err68? How do I repair?

E68 One of the keys (buttons) is Enter function testmode and perform key stuck closed (active). (button) test to determine which button is at fault. Carefully free the and perform the test again. If button is free but the key struck code still exists, replace electronic control.

Sep 21, 2009 | Dryers

1 Answer

Dryer keeps stopping error code e68

E68 error refers to "Current leakage to ground on heater or fuse opened".Problem with the fuse.Try getting it replaced.This can be done by any local repairman.Need not be a technician from Frigidaire,as they charge a lot for servicing. Good luck with the machine.Please do post results and comments.

Apr 12, 2009 | Frigidaire GLEQ2152ES Electric Dryer

1 Answer

Hi, I am getting an error E68 on my dryer

Hi have you tried putting less into the machine as this could be a simple over weight problem

Oct 27, 2008 | Frigidaire GLEQ2152ES Electric Dryer

Not finding what you are looking for?
Frigidaire GLEQ2152ES Electric Dryer Logo

608 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dryers Experts

Tim Whalen

Level 3 Expert

3074 Answers


Level 3 Expert

81400 Answers

Sal De

Level 3 Expert

2699 Answers

Are you a Frigidaire Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides