Question about EliteGroup NFORCE4-A939 (NFORCE4A93910) Motherboard

1 Answer

Nforce4-a939 board ,my system shows single channel 64 bit but on perchasing it was dual channel 128 bit how can i fix it......

Posted by on

  • ali_jojo55 Jul 29, 2010

    i have installed windows7 it is perfect but havin a little problem,every time when i start computer itts net and internet are set off and on network icon it shows a problem sign like(!) ok i can solve this problem by using this method i.e device manager-network adapter- poerties-advance-speed and duplex,after changing the speed and duplex setting it may fix but every time i m facing this problem how can i set this problem............

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 10,406 Answers

The 128-bit mode is achieved by putting _matching_ sticks of RAM in the RAM-slots. Non-matching RAM will run as "single-channel" (64-bit) mode.

Matching RAM must have the _same_ amount of RAM per stick,
and the same internal "timing" parameters (look closely at the RAM for strings like 3-2-2 or 2-2-2-2).

If you have exactly 2 RAM slots on the motherboard, matching RAM will always run in "dual" mode.

If you have matching RAM, and you have 4 RAM slots, put one stick of RAM in slot #1, and one in slot #2, and leave #3 and #4 empty. Start it up, to see if it is using "dual" mode.

If not, shutdown, power-off, and move the RAM from slot #2 to #3, and start it again. This time, it will run in "dual" mode.

Posted on Jul 22, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a DFI LANPARTY UT nF4 Ultra-D and have been been unable to use all of the memory slots. I originally bought 4GB but have only been able to use 2. Is there a setting that i need to enable?


Hi, you can use up to 3 gigabytes on windows xp 32 bit with service pack 3.
You need a 64 bit operating system to use 4 gigabytes of ram.
Here is some info:

CPU
AMD Athlon 64 FX / Athlon 64 / Sempron Socket 939
Chipset
NVIDIA nForce4 Ultra
Front Side Bus
2000MT/s
HyperTransport interface
Memory
Four 184-pin
DDR SDRAM DIMM sockets
Supports dual channel (128-bit wide) memory interface
Supports up to 4GB system memory
Supports
DDR266, DDR333 and DDR400 DDR SDRAM DIMM
BIOS
Award BIOS
CMOS Reloaded
CPU/DRAM
overclocking
CPU/DRAM/Chipset overvoltage
4Mbit flash memory

Aug 30, 2011 | DFI LANPARTY UT nF4 Ultra-D Motherboard

1 Answer

I bought P3200 ddr 400 1gb memory and when i install it , it does not show up. any ideas why and if there is something i can do .


The Intel® Server Board S875WP1-E supports both ECC and Non ECC Unbuffered PC2100 (266 MHz), PC2700 (333 MHz), or PC3200 (400 MHz) compliant Double Data Rate (DDR) memory modules. Dual channel memory functionality requires two DIMM modules installed into DIMM sockets 1A & 1B, and then DIMM sockets 2A & 2B. The DIMM module size, speed and vendor must be the same.

You can install a single 128 MB memory module into DIMM socket 1A. The minimum supported memory size is 128 MB. The minimum main memory configuration is a single 128 MB memory module, and the maximum configurable memory size is 4GB. With only a single memory module installed, the system will only operate using a one memory channel.

Third party memory vendors may use the same module part number with different
DRAM vendors and die revisions. To insure proper system operation, verify that each DRAM
vendor and die revision has been separately tested and qualified. Please notify CMTL if there is a discrepancy.

Apr 10, 2011 | Intel Server Board S875WP1-E (S875WP1LX)...

1 Answer

I wish to upgarde to the fasted CPU possible for my motherboard


More importantly RAM will give you better performance, if your computer is low on ram it doesn't matter much what the cpu is.

you can put up to 4GB of ram into it
4 x 184-pin DDR SDRAM DIMM socket support up to 4 GB
Support DDR400/333/266 unbuffered DDR SDRAM

here is a list of supported CPU's
http://www.ecsusa.com/ECSWebSite/Support/CPU_Support_Model.aspx?detailid=493&MenuID=69&LanID=0

I think any of the dual cores on that page will be a OK upgrade.

So if you upgrade your ram to 2GB and a Dual core 4800+ that should be good. but in the long run it might be smarter to upgrade to a new motherboard and even faster cpu, with DDR 2 memory, the memory ddr2 is really cheap these days.

May 21, 2009 | EliteGroup nFORCE4-A939 Motherboard

2 Answers

Can the nforce4 a939 run on vista


Hello johanki,
I think so, you can check Motherboard page on ASUS website for more details
http://www.asus.com/ProductGroup2.aspx?PG_ID=mKyCKlQ4oSEtSu5m

Apr 09, 2009 | EliteGroup NFORCE4-A939 (NFORCE4A93910)...

1 Answer

ECS Nforce4-a939 ram detection issue


Some people don't like links as a solution, but the subject is more complicated than just a few lines of text, By chance do you have a killer graphics card with 1 gig of memory (which in turn overwrites the 4 gigs of system memory when mapped. 4-1=3) Give this a read:
http://support.microsoft.com/kb/929605

Feb 04, 2009 | EliteGroup NFORCE4-A939 (NFORCE4A93910)...

1 Answer

Nforce4 a939 power led comes on, but nothing else


I am on an nforce asus an32-sli premium, with a 939 in it right now you need a 450 -500V power supply. they are resourse hogs, also are you running anything into the cable or ribbon that the main drive is on, if so try running just the drive and nothing else plugged into the MB as a master 0. Don't forget to connect the sata if you are running sata. let me know if it boots in that config, also clear the cmos and pop the battery prior to booting.

Dec 21, 2008 | EliteGroup NFORCE4-A939 (NFORCE4A93910)...

1 Answer

Type of ram


ASUS A8N-SLI Premium Specifications
CPU: Socket 939 for AMD Athlon 64FX / Athlon 64 /Sempron / Athlon 64 X2
Chipset: NVIDIA nForce4 SLI
Front Side Bus: 2000/1600 MT/s
Memory: 4 x DIMM, max. 4GB, DDR 400/333/266, ECC, non-ECC, un-buffered memory, Dual Channel Architecture.
Expansion Slots:
2 x PCI-E x16
- SLI mode: x8, x8
- Default (single VGA): x16, x1
1 * PCI-E x 1/ 1*PCI-E x 4(x2 mode)
3 x PCI
Storage/RAID: nForce4: 4 x SATA 3Gb/s
NVRAID: RAID0, RAID1, RAID0+1 and JOBD span cross SATA and PATA
2 x UltraDMA 133/100
Silicon Image 3114R RAID controller
4x SATA with RAID0, 1, 10, 5
Audio: Realtek ALC850, 8-ch High-Definition Audio CODEC
LAN: nForce4 built-in Gbit MAC with external Marvell PHY MARVELL PCI Gbit LAN controller

or see this site:
http://www.ngohq.com/home.php?page=articles&go=read&arc_id=34


Oct 30, 2008 | ASUS A8N-SLI Premium Motherboard

1 Answer

NFORCE4 -939 MOTHERBOARD PROBLEM


Well if you like you can pay for the live chat and I can help you if you like. I work on computers for a living. It would be to hard to truoble shoot this typing a paragraph at a time.

Feb 13, 2008 | EliteGroup NFORCE4-A939 (NFORCE4A93910)...

1 Answer

SYSTEM SHOCKING AND DOES NOT BOOT


first chuck with ur power supply earthing. if ur power supply is correct, then chuck ur SMPS

Feb 10, 2008 | EliteGroup NFORCE4-A939 (NFORCE4A93910)...

1 Answer

HOW TO CONFIGURE RAID


I needed to see your board & can at this site. http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=493&DetailName=Manual&MenuID=1&LanID=0

This is good for you as well. It shows me & you that your board can handel 4 each DMA/ATA-133 (Ultra) IDE Hard drives/ CD/DVD drives IDE-1Primary & IDE-2 Primary Slave. Each can run 2 IDE drives. Also 4 each Serial ATA SATA's. Two separate SATA controllers with integrated PHYs, each supporting two
drives in master mode. In your manual on pg.32 & 33 will help you to setup a RAID if you wish. Or you can also set the RAID to IDE which will allow you to use all your SATA hard disks as a single drive without setting up a RAID system. The site above supplies all your drivers needed & manual. If you need more help please let me know here.
Luck!
Please vote......

Jan 13, 2008 | EliteGroup NFORCE4-A939 (NFORCE4A93910)...

Not finding what you are looking for?
EliteGroup NFORCE4-A939 (NFORCE4A93910) Motherboard Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top EliteGroup Computers & Internet Experts

David
David

Level 3 Expert

781 Answers

Alun Cox

Level 3 Expert

2678 Answers

Iqbal Husain
Iqbal Husain

Level 3 Expert

655 Answers

Are you an EliteGroup Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...