Question about Computers & Internet

3 Answers

Hi, I have a DSL-504T ADSL router that has been running without any problems for some time. I just bought a wireless Dl-624S router. I have been unable to connect the wireless router to my ADSL router.I have been over the install for the wireless and at the same time Turned off the DHCP on the router. The problem is when all are connected up I can see the wireless and the LAN but connot connect to the internet. Can you please advise me of the settings and also should I be using the wireless WLAN to LAN router connection or LAN to LAN. Many thanks Gary.

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,226 Answers

Hello,

If the ALL PC see each other, then verify the connection towards the provider. if this not solve please refer to your manual for the configuration of the router.

may this help, melnavz

Posted on Apr 22, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 13,433 Answers

Hello,

it seems you have bought a new wireles ADSL router, you dont need the old one anymore, you should connect the new adsl wireless router to your phoneline and then connect the pcs to it, you can sell the old router since you shouldnt need it anymore.

Posting more in a moment.

Posted on Apr 22, 2008

  • 1 more comment 
  • Ekse Apr 22, 2008

    basicly after you have set the new adsl router to the phoneline. The internet should work automatically if not reset the adsl router by pressing and holding the reset button behind the device this will resume the default settings. And it should work automatically, this way we wont need to enter the setup and enable the dhcp server again.



    Then proceed to edit your wireless adsl routers settings as you wish, I would recommend WPA encryption or wep if you must, wep is not secure, a hacker can gain access easyly to a wep protected network.



    let me know if it doesnt work or if you need more assistance, I'm here to help.

  • Ekse Apr 22, 2008

    Oh, seems I have confused the two models.



    so your 624s doesnt have adsl build in your router had adsl



    the connection should be the following:



    Wall socket, phone cable to adsl router. From router networkcable to wireless box, router port 1 or 4, on the wireless box the cable should be connected to the port witch reads Internet or unplink. Its the alone port in the box there are 4 ports together and then one that is alone. connect it to that one.



    Now the wireing is correct.



    the wlan box should automatically get a address from the router.

    You might need to enter the wireless setup to configure wlan to lan.

  • Ekse Apr 22, 2008

    I'm here let me know if you need more assistance in this.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 652 Answers

Freind,
You should have a look on manual, if you don't have just goto the manufacturer's site and download a manual for your product.
I think it will help you in a better ways.

Thanks
Iqbal

Posted on Apr 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

D-Link DSL-2750U N300 ADSL Modem Wireless Router configuration with Hathway


YES THATS TRUE. TO CONFIGURE THE ROUTER. NEED THE PPPOE USERNAME AND PASSWORD FROM THE INTERNET SERVICE PROVIDER. VPI AND VCI SETTINGS.
..THEN ACCESS THE ROUTER PAGE
..GO TO ADVANCE SETUP PAGE.
..THEN LAYER2 INTERFACE
..CLICK ADD
..CONFIGURE THE SETTINGS.
..POWER CYCLE THE NETWORK.

Nov 21, 2012 | D-Link ADSL2/2+ Modem/Wireless Router...

2 Answers

D-Link DSL-504T driver disc missing, looking for Win 7 compatable driver for modem.


No driver needed since you aren't connecting the pc the the modem, but to the router.
Connect the pc to the D-Link DSL-504T with a LAN cable, access it from a browser by going to this IP - 192.168.0.1 - , in there access the modem settings and configure it accordingly.

Jun 20, 2011 | D-Link SWT DSL-504T ADSL MODEM with 4...

1 Answer

Forgot password D-Link DSL-504 ADSL Router 4 Port or mack resetting


Login into you router using your browser (connected by a LAN cable) and under the wireless section you should see the network password.

The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset

If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can ssets-up form scratch.

Dec 31, 2010 | D-Link DSL-504T Router

1 Answer

I have bought a wireless ADSL modem, Dlink DSL 2640u , How can I install and use it for another laptop? I want to use it without wire. Thanks


all wireless devices must be allowed in the router by either MAC address or by name. This is accomplished by logging into to the router and setting up the device in with the wireless setup feature in your router. The router will not allow the device to connect without permissions.

Aug 07, 2010 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

I need to change the modulation type on my modem to select g.dmt to make my internet connection more stable HELPPPPP!! i have NO clue how to do it. it's an ADSL 2+router DSL 504T.i am computer...


To configure the modem You will need to use the cd provided.
ftp://files.dlink.com.au/products/DSL-504T-GenII/QuickInstallGuide/DSL-504T_C3_QIG_v2.00.pdf

Or to configure without the cd follow the steps below:
  1. Connect the Adsl router with your computer.
  2. Use the network cable provided with the router.
  3. Connect the power cable to the modem, it will light on firmly with a green button on.
  4. Open your web browser and type the ip address: http://10.1.1.1
  5. Default username and password is:
  6. User-name: admin
  7. Password: admin
  8. Use the quick setup wizard.
  9. It will be more easy for you to configure it.
  10. Be sure to have the username and password from the ISP for the internet access, you may need to reconfigure it from start. or if you may need to reset the modem
  11. At times to access your modem you will need to set the ip of your network card to the same range.
  12. To set the ip go in control panel then open network connection
  13. Doulbe click the local area connection.
  14. open Internet Protocol Open Tcp/ip
  15. then set your ip Like: 10.1.1.5
  16. ok
  17. ftp://files.dlink.com.au/Products/DSL-504T-GenII_NZ/Manuals/
I am enclosing a manual for you.
If you Need further help do not hesitate to revert back
Ok cheers
Uttam

Feb 13, 2010 | Computers & Internet

1 Answer

Remote manage a DSL 504T router


If you have a dynamic IP on your wan port you shall register a domain name and register it with dynamic DNS, provide your dynamic dns name in your DSL router so that you shall connect to your DSL router by calling the registered dynamic dns name from any where (you should have internet connection).

1. Register a name in dyndns.com
2. update this on your dsl router

Wait for some time,

3. access the registered name from anywhere using a browser

Jun 09, 2009 | D-Link DSL-504T/EU Router

1 Answer

I need to open port 8888 on d-link DSL-504T and is there any manual i can see to do that thanks so much


Hi,

Please download this maunal.

http://www.pobox.co.uk/support/downloads/manuals/DSL-504T_Install_Guides.pdf

and refer to page 14 which is port forwarding...

Jan 28, 2009 | D-Link DSL-504T Router

1 Answer

ZYXEL P-660HW-T1 V2 WIRELESS ROUTER MODEM WILL NOT CONNECT TO MY ISP


is your router connected to your ISP ? (does your dsl led light up ??)
if no! check your wires from phone to router!! and check your SPLITER !!! (i had the same problem, i got bad spliter !!! NEW BUT FAULTY !!!)
chears

Sep 23, 2008 | Zyxel Prestige 660HW Wireless Router...

1 Answer

Adsl2+


don't go for the cd you configure your self abd it think that your dsl not get the perfect dsl link

Jul 10, 2008 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

D link modem


try to upgrade the latest firmware for the router and that would fix this problem, check if this problem is with both wired and wireless computers, if not with the wired..only wireless has problems, check if you have any other wireless device operating in the same frequency of the router..if s, turn off other devices and check b.cos that me interfere your w/ls connection, if wired is having the same problem, connect modem straight to the pc and observe the connection, so that you can isolate problem.. Your router is not synchronized with the line. You should power cycle your router (i.e)disconnect power cable from the router waith for 30 seconds and then reconnect, check if the dsl cable is connected properly to the router, if yes remove it once and the reconnect it, this should fix the problem. upgrade the latest firmware version for your router .Are there any electrical devices near the router that are only switched on at that time of day and then switched off again in the morning. What i'm thinking is that you are experiencing REI or Repetitive Electronic Interference. This is caused by EMP emmisions form devices nearby. Have you had anything fitted recently that may be hardwired into you master socket, this will bypass your filter and cause interference on the line. The only other thing I can think of is that there maybe some engineering works going on at the exchange or on the line.

Nov 07, 2007 | D-Link SWT DSL-504T ADSL MODEM with 4...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

101466 Answers

David Payne
David Payne

Level 3 Expert

14160 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...