Question about Televison & Video

1 Answer

Onkyo 875 suboofer problem

I have an onkyo 875 which i have connected to a panasonic 700 plasma tv as well as a panasonic bd 40 blue ray player.  they have been connected via hdmi.  i have snell speakers, including an amplified suboofer.  the three front speakers work fine but the subwoofer is not emitting sound.  on the speaker setup from the receiver, the subwoofer is not identified in the testing mode.  i also checked with the dvd player and it also did not recognize the subwoofer.  both units recognized the other speakers...
Jarrod

Posted by on

  • Yiquanone May 10, 2008

    My subwoofer channel was working but has decided to stop working,
    everything else works fine. I tried full system reset, and unpluging
    unit for an hour. I changed wires and checked all connections, the port
    is just not putting out a signal. I just got this thing the other day.

  • Yiquanone May 10, 2008

    I found the solution, there are 2 jacks that say sub-woofer, it is easy
    to put it in the wrong one, use the ones toward the outside of the
    receiver. The one marked for multiplex does not output, I have not
    figured out what multiplex is for yet.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Decided to get a technician over.

Posted on Apr 23, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't my blue-ray player DMP-BD87 play blue-ray disc's any more?


Because Blue-Ray isn't what it's cracked up to be. In fact no TV studio will even consider using one.

Mar 07, 2015 | Panasonic DMP-BD871 Smart Network Blu-ray...

2 Answers

Blue ray disc player is working fine, but the tv is not showing any channels. We are just installing our new tv. What did we do wrong?


I just bought a samsung BD-P4600 and I tried to connect with a Philips Plasma TV. What channel do I need to put it on for it to show?

Sep 07, 2009 | Panasonic Viera TH-42PX80U Plasma TV

3 Answers

HDMI connection with Panasonic DMP-BD35K Blu-Ray Disc Player


Try hooking the Panasonic up straight to the tv without going through the receiver. If it displays a picture its obviously not the blu-ray player. May also be a problem with the HDMI cable itself. Hope this helps.

Jan 04, 2009 | Onkyo TX-SR506 Receiver

1 Answer

Remote Control Not Communicating with TX-DS787


Hello, I am sorry about your issue. Your hook up should have nothing to do with the remote. You should get some functions like on/off, volume control. Thank you, Onkyo, USA

Apr 25, 2017 | Onkyo TX-DS787 Receiver

2 Answers

Onkyo 875 suboofer problem


Hello,

Is the subwoofer got a power? If not then troubleshoot the input power maybe fuse damage.

if there is power, EXamine the connection from the woofer to the output of the source. check the jacket of the of termination.

Apr 22, 2008 | Onkyo TX-SR605 Receiver

1 Answer

HDMI Output with my Onkyo 875 Receiver


Hello, the TX-SR875 does not support up-converting from component or S-video to HDMI. Is the model number correct? You stated the receiver is "brand new". This model is from 2007. Thank you, Onkyo USA

Mar 23, 2017 | Onkyo TX-SR875 Receiver

2 Answers

No HDMI Output


My configuration:
ZONE 1 (living room)
DishNetwork Dual Tuner DVR Tuner 1 [S-Video out] -> [S-Video in] ONKYO TX-SR875 [HDMI out] -> [HDMI in] Sony KDS-60A3000 rear projection TV

ZONE 2 (living room)
DishNetwork Dual Tuner DVR Tuner 2 [Composite Video out] -> [Composite Video in] ONKYO TX-SR875 [Composite Video out] -> [Composite Video in] Samsung AQUOS LCD TV

Problem:
ONKYO receiver stops sending video signal to my ZONE 1 Sony TV through the HDMI connection. ZONE 2 may still receive video. (NOTE: the issue might be related to the upconverter circuitry?)

Symptom:
I couldn't see any video, but I could hear the Tuner 1 audio through my ONKYO. An important clue is that I couldn't see ONKYO's on-screen display menu on my TV when hitting the [Setup] button on my remote. But, I could see my TV's Sony-based menus and display options.

Solution:
1. Put all ZONES in Standby mode using the remote. Hit these buttons on remote: [Receiver], then [Standby]. [Receiver], [ZONE2], then [Standby], [Receiver], [ZONE3], then [Standby]. You should NOT see any lights on the ONKYO except maybe one red led near the power button.
2. Pull the power plug out of the back of the ONKYO, and leave unplugged for 20-30 seconds. Turning off any power center it is connected to isn't enough. You MUST unplug the power from the back of the ONKYO for 20-30 seconds.
3. Reconnect the power cord to the ONKYO.
4. Using the remote, set ZONE1 to a video source known to be working. If you don't see video, try leaving the power cord off for a longer period.

I know it sounds too simple to work, but that's what brought the video back for me the few times the video stopped displaying. Hope it works for you.

Jan 06, 2008 | Onkyo TX-SR875 Receiver

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74887 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5266 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...