When i go to create an accoun for gmail. I enter mu userid and i keep getting the response that only letters a-z and numbers 0-9 can be used. I am using those?

Hello, Nthepane -

Go to the Gmail home page:
https://www.google.com/gmail/about/#

See the CREATE AN ACCOUNT link in the upper right corner of that page. Click or tap on that link. Follow the onscreen instructions.

Be sure to write your gmail address and password and keep that information in a safe place in case you forget one or both of them.

Best wishes.

Login to the gmail website using the link listed below

One account All of Google


Then enter your username and password to login to your gmail account

Can you take of the 2-step verification, or do you need your p/w to do that? Check to see if you can go to settings for that.

Open a NEW gmail accoun. Look at HELP menu item how to recover lost gmail. account. I believe you can recover it using a previous password

Valid VIN numbers use the letters A-Z and numbers 0-9, except for the letters I, O, and Q. If the VIN is not working properly, check to see if letters and numbers have been accidentally inverted. Make sure the letter O was not entered in place of the number 0. Also, make sure the correct number of characters has been entered.

If you know your Google number but have forgotten the Google Account username you used to sign in, use https://www.google.com/voice/b/0/account/recovery to help you recover your username. You'll be asked to:

1. Enter your Google number in the appropriate field
2. Fill out the captcha (distorted words in a box).
3. After completing the captcha, a message will be sent to the Google Account associated with the Google number you provided.

To assign or change youe speed dial. Do the following: 1. Press STORE. LOCATION? shows in the display. 2. Press the desired memory location (0 to 9 or quick call buttons A, B, or C.) NOTE: Press LEFT or RIGHT to scroll through 0 - 9 or quick call buttons A, B, or C to select a location. 3. Press STORE again to confirm the memory location. NOTE: Use Delete to erase existing memories or to correct errors. 4. Use the number keys to enter the telephone number (up to 32 digits) and then press STORE to save. 5. Use the number keys to enter the name of the person associated with the telephone number you just entered. More than one letter is stored in each of the number keys. Press the keys multiple times to scroll through the letters for that key. For example, to enter "B," press "2" twice. Press LEFT two times to create a space. NOTE: The flashing cursor automatically moves to the next position

You can always find solutions to Xerox problems @ www.xerox.com/support Once you set this up both you and your neighboring business will BOTH have to use individual codes. Hope it helps!
Solutions for : How To Set up or Modify Auditron User Accounts Solution : Set up or Modify Auditron User Accounts The following information describes how to register userIDs and usernames, login names, and passwords for authenticating accesses attempted through the network for scanning services, and impose restrictions on the maximum number of pages to be copied or scanned. Up to 500 user accounts can be registered.
NOTE: You must be a System Administrator to perform this solution.

1. Press the [Log In / Out] button on the Control Panel. The Login screen will be displayed.
2. Enter the System Administrator userID using the numeric keypad on the Control Panel, or select the [Keyboard] button on the Touch Screen to enter the userID, and then select [Save] on the Touch Screen.
3. If necessary, enter the System Administrator password using the numeric keypad, or select the [Keyboard] button to enter the password, and then select [Save] on the Touch Screen.
   
   NOTE: The default userID is 11111, and the default password is x-admin (must be entered in lower case). If the userID and / or password have been forgotten, a service call must be placed.
   
   
4. Select [Confirm] on the Touch Screen. The System Administrator Menu screen will be displayed.
5. Select [System Settings]. The System Settings screen will be displayed.
6. Select [Login / Auditron Administration]. The Login Setup / Auditron Administration screen will be displayed.
7. Select [Create / Check User Accounts]. The Create / Check User Accounts screen will be displayed.
8. Select a user account number or use the numeric keypad to enter a user account number in the Go to (001-500) field.
9. Select [Create / Delete]. The User Account screen will be displayed.
10. Enter a userID using the keypad on the Touch Screen, and then select [Save]. The Create / Delete screen will be displayed.
11. Select from the following options:
    • UserID: Allows a userID to be entered using the keyboard on the Touch Screen. Up to 32 alphanumeric characters can be entered including spaces.
    • User Name: Allows a username to be entered using the keyboard on the Touch Screen. Up to 32 alphanumeric characters can be entered including spaces.
    • Password: Allows a password to be entered using the keyboard on the Touch Screen. 4 to 12 alphanumeric characters can be entered. The Password button is also displayed if a password was selected on the Login Setup / Auditron Mode screen.
    • Remote Login Settings: The following settings can be modified on this screen:
      • Login Name - Allows a login name to be programmed that needs to be entered when the machine is accessed through the network.
      • Password - Allows a password to be programmed that needs to be entered when the machine is accessed through the network.
    • Account Limit: Select [Copy Service] or [Scan Service], and then select [Account Limit]. Using the numeric keypad on the Control Panel, specify and restrict the maximum number of pages to be copied or scanned for the account. The maximum number can be entered within the range of 1-9,999,999 pages.
    • Reset Total Impressions: Deletes all data tracked for the selected account.
    • Reset Account: Clears all settings and data for the selected account.
12. Select [Save].
13. Select [Close] three times.
14. Select [Exit].

The following information describes how to register userIDs and usernames, login names, and passwords for authenticating accesses attempted through the network for scanning services, and impose restrictions on the maximum number of pages to be copied or scanned. Up to 500 user accounts can be registered.
NOTE: You must be a System Administrator to perform this solution.

1. Press the [Log In / Out] button on the Control Panel. The Login screen will be displayed.
2. Enter the System Administrator userID using the numeric keypad on the Control Panel, or select the [Keyboard] button on the Touch Screen to enter the userID, and then select [Save] on the Touch Screen.
3. If necessary, enter the System Administrator password using the numeric keypad, or select the [Keyboard] button to enter the password, and then select [Save] on the Touch Screen.
   
   NOTE: The default userID is 11111, and the default password is x-admin (must be entered in lower case). If the userID and / or password have been forgotten, a service call must be placed.
   
   
4. Select [Confirm] on the Touch Screen. The System Administrator Menu screen will be displayed.
5. Select [System Settings]. The System Settings screen will be displayed.
6. Select [Login / Auditron Administration]. The Login Setup / Auditron Administration screen will be displayed.
7. Select [Create / Check User Accounts]. The Create / Check User Accounts screen will be displayed.
8. Select a user account number or use the numeric keypad to enter a user account number in the Go to (001-500) field.
9. Select [Create / Delete]. The User Account screen will be displayed.
10. Enter a userID using the keypad on the Touch Screen, and then select [Save]. The Create / Delete screen will be displayed.
11. Select from the following options:
    • UserID: Allows a userID to be entered using the keyboard on the Touch Screen. Up to 32 alphanumeric characters can be entered including spaces.
    • User Name: Allows a username to be entered using the keyboard on the Touch Screen. Up to 32 alphanumeric characters can be entered including spaces.
    • Password: Allows a password to be entered using the keyboard on the Touch Screen. 4 to 12 alphanumeric characters can be entered. The Password button is also displayed if a password was selected on the Login Setup / Auditron Mode screen.
    • Remote Login Settings: The following settings can be modified on this screen:
      • Login Name - Allows a login name to be programmed that needs to be entered when the machine is accessed through the network.
      • Password - Allows a password to be programmed that needs to be entered when the machine is accessed through the network.
    • Account Limit: Select [Copy Service] or [Scan Service], and then select [Account Limit]. Using the numeric keypad on the Control Panel, specify and restrict the maximum number of pages to be copied or scanned for the account. The maximum number can be entered within the range of 1-9,999,999 pages.
    • Reset Total Impressions: Deletes all data tracked for the selected account.
    • Reset Account: Clears all settings and data for the selected account.
12. Select [Save].
13. Select [Close] three times.
14. Select [Exit].

1. Create a Windows 2000 boot disk that contains the following files: Ntldr
   Ntdetect.com
   Boot.ini
   Ntbootdd.sys For more information about how to create a boot disk, click the following article numbers to view the articles in the Microsoft Knowledge Base: 301680 (http://support.microsoft.com/kb/301680/ ) How to create a boot disk for an NTFS or FAT partition in Windows 101668 (http://support.microsoft.com/kb/101668/ ) How to use a Windows boot disk to prevent boot failure
2. Modify the Boot.ini file to point to the correct hard disk controller and to the correct volume for your Windows installation. For more information about how to create a boot disk, click the following article number to view the article in the Microsoft Knowledge Base: 311578 (http://support.microsoft.com/kb/311578/ ) How to edit the Boot.ini file in Windows 2000
3. Insert the boot disk into the computer's floppy disk drive, and then restart the computer.
4. Copy the Ntldr file, the Ntdetect.com file, and the Boot.ini file from the boot disk to the system partition of the local hard disk.

Method 2: Use the Recovery Console loadTOCNode(3, 'summary');

1. Use the Windows 2000 Setup disks to restart the computer, or use the Windows 2000 CD-ROM to restart the computer.
2. At the Welcome to Setup screen, press R to repair the Windows 2000 installation.
3. Press C to repair the Windows 2000 installation by using the Recovery Console.
4. Type the number that corresponds to the Windows installation that you want to repair, and then press ENTER. For example, type 1, and then press ENTER. For more information, click the following article number to view the article in the Microsoft Knowledge Base: 229716 (http://support.microsoft.com/kb/229716/ ) Description of the Windows Recovery Console
5. Type the Administrator password, and then press ENTER.
6. Type map, and then press ENTER. Note the drive letter that is assigned to the CD-ROM drive that contains the Windows 2000 CD-ROM.
7. Type the following commands, pressing ENTER after you type each one, where drive is the drive letter that you typed in step 4 of "Method 2: Use the Recovery Console," of this article: copy drive:\i386\ntldr c:\
   
   copy drive:\i386\ntdetect.com c:\ If you are prompted to overwrite the file, type y, and then press ENTER.
   
   NOTE: In these commands, there is a space between the ntldr and c:\, and between ntdetect.com and c:\.
8. Type the following command, and then press ENTER: type c:\Boot.ini A list similar to the following list appears: [boot loader]
   timeout=30
   default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
   
   [operating systems]
   multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect
   If you receive the following message, the Boot.ini file may be missing or damaged:The system cannot find the file or directory specified.
9. If the Boot.ini file is missing or damaged, create a new one. To do so, follow these steps:
   1. Use a text editor, such as Notepad or Edit.com, to create a boot loader file similar to the following boot loader file:[boot loader]
      timeout=30
      default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
      
      [operating systems]
      multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect
      For more information, click the following article number to view the article in the Microsoft Knowledge Base: 102873 (http://support.microsoft.com/kb/102873/ ) Boot.ini and ARC path naming conventions and usage 301680 (http://support.microsoft.com/kb/301680/ ) How to create a boot disk for an NTFS or FAT partition in Windows
   2. Save the file to a floppy disk as Boot.ini.
      
      NOTE: If you used Notepad to create the file, make sure that the .txt extension is not appended to the Boot.ini file name.
   3. Type the following command at the Recovery Console command prompt to copy the Boot.ini file from the floppy disk to the computer: copy a:\Boot.ini c:\
10. Type exit, and then press ENTER. The computer restarts.