Question about Nintendo Video Game Consoles & Games

2 Answers

My wii fit balance board keeps blinking but will not stay on. batteries are good. cant find my instruction book. what could be my problem????

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Follow this

  1. Insert a Wii Balance Board compatible game disc in the Wii console.


  2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.

  3. Open the small SD Card slot cover on the front of the Wii console.

  4. Remove the Battery Cover on the bottom of the Wii Balance Board.

  5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.

  6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.

  7. The blue light will stop blinking and stay on steady once the syncronization is complete.

Posted on Nov 28, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,340 Answers

It sounds like it lost it's synch.Put a game in the console for wii fit and bypass all the startup screens.Open the large door on the console base and open the battery cover on the fit board.Press the sync button on the balance board and while the blue light is still flashing,press the red sync button on the console.If the blue light goes steady it is synched and should stay on.If it takes a few tries and doesn't work,you need to contact Nintendo.1-800-555-1212 is a FREE directory assistance number for companies with toll-free numbers.It will prompt you to say nintendo,they will repeat it so you can verify,then they will give you the number. Good luck!

Posted on Jul 23, 2010

  • mopere Nov 04, 2010

    unlock repair cheat wii without modchip within 5 minutes and back up all wii games dvd homebrew and more
    http://unlockwii.co.cc

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect wii fit board to the wii


Important Note!
Do Not use "One-Time Mode" sync.
Syncing can be completed only if a compatible game disc is running in the console.The Wii Balance Board may need to be synced to each compatible game individually.Some games may require you to go into a specific screen to sync the Wii Balance Board.These sync settings will be saved even after the console is turned off.

1. Insert a Wii Balance Board compatible game disc in the Wii console.
2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game.3. Open the SD Card slot cover on the front of the Wii console.4. Remove the Battery Cover on the bottom of the Wii Balance Board.
5. Press and release the SYNC button on the Wii Balance Board. The Power LED on the board will start blinking.
6. Press and release the SYNC button on the console while the Power LED on the board is still blinking.
7. The Power LED will stop blinking and light steadily once the synchronization is complete.8. Replace the battery cover and return the board to the normal operating position.

Nov 16, 2011 | Nintendo Wii Fit for Wii

1 Answer

How do you sync the wii console and wii fit board


Put the Wii Fit game disc in the Wii and start the game. Then open the small SD Card slot cover on the front of the Wii console then remove the battery cover on the bottom of the Wii Balance Board. Press and release the SYNC button on the Wii Balance Board. The light on the board should start blinking. Afterwards press and release the red SYNC button on the Wii console while the light on the board is still blinking. The light on the balance board will stop blinking and stay on steady once the syncronization is successful.

Mar 03, 2011 | Nintendo Wii Console

1 Answer

I can not re start my nintendo balance board,


1. Insert a Wii Balance Board compatible game disc in the Wii console.

2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.

3. Open the small SD Card slot cover on the front of the Wii console.

4. Remove the Battery Cover on the bottom of the Wii Balance Board.

5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.

6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.

7. The blue light will stop blinking and stay on steady once the syncronization is complete

Dec 20, 2010 | Nintendo Wii Fit - Balance Board + Game...

1 Answer

MY WII BALANCE BOARD IS CHARGED BUT THE BLUE LIGHT WONT STAY ON.


  1. Insert a Wii Balance Board compatible game disc in the Wii console.


  2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.


  3. Open the small SD Card slot cover on the front of the Wii console.


  4. Remove the Battery Cover on the bottom of the Wii Balance Board.


  5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.


  6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.


  7. The blue light will stop blinking and stay on steady once the syncronization is complete.

click here to download repair guide if u want

Dec 15, 2010 | Nintendo Wii Fit - Balance Board + Game...

2 Answers

I have a wii fit board, when you power it up, it


Had the same problem. It's a sync problem.
First, best to double check you have fresh batteries.
Next, turn the board upside down and remove the cover from the battery compartment.
Open the small hatch cover on the front of your console unit.
Now start wii fit from the disk menu item.
Next, press the small red button inside the balance board battery compartment. The blue lights will blink for approx 3=5 sec.
While they are blinking, press the red button on the console (in the hatch compartment).
This should re-sync your board and the light stays lit.
Good luck.

Apr 07, 2010 | Nintendo CTA Digital WI-BBP Wii Fit...

1 Answer

Bought 2nd hand wii fit, have just loaded disc and replaced batteries in board but power light not staying on board, flashes for about 30 seconds and then switches off. Does it need to be synchronised with...


    Hope this helps

    Try these steps!

  1. Insert a Wii Balance Board compatible game disc in the Wii console.

  2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.

  3. Open the small SD Card slot cover on the front of the Wii console.
  4. Remove the Battery Cover on the bottom of the Wii Balance Board.
  5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.
  6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.
  7. The blue light will stop blinking and stay on steady once the synchronization is complete.
please leave a good rating and testimonial if you appreciate my help. THNX

Mar 27, 2010 | Nintendo Wii Fit for Wii

1 Answer

We used our wii fit on another wii system. After


Hello,

    Try these steps!

  1. Insert a Wii Balance Board compatible game disc in the Wii console.

  2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.

  3. Open the small SD Card slot cover on the front of the Wii console.
  4. Remove the Battery Cover on the bottom of the Wii Balance Board.
  5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.
  6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.
  7. The blue light will stop blinking and stay on steady once the syncronization is complete.
Fore more detailed information (including pictures) on how to sync the Wii Balance Board, click here.

If you are still unable to sync your Wii Balance Board, please call 1-800-255-3700 so that they may assist you further.

Hope it helped.


Nov 22, 2009 | Nintendo Wii Fit for Wii

1 Answer

Balance board on wii fit doesn't turn on? power light flashes


All i had to do was SYNCHRO the board by pressing the synchro button on the wii balance board were the battries go, the power LED will blink (note once the power LED has started blinking, stop pressing the synchro button)
THen you need to press the synchro button on the wii console, while the wii balance board's power LED is blinking

Oct 17, 2009 | Nintendo Video Game Consoles & Games

1 Answer

Balance board keeps losing communication


I can at least point you in the direction of the instruction manual:
https://www.nintendo.com/consumer/manuals/wii.jsp

Sep 05, 2017 | Nintendo Wii Console

1 Answer

Wii Fit board not staying on


Best suggestion is to make sure the game is fully loaded before pressing the power button.

If it's not working, make sure you press the red sync button on the Wii Fit Balance Board AND the Wii Console.

I know you tried new batteries, but make sure they are really NEW batteries (My experience is that the alkalines work best).

If it still doesn't work, then you may need to contact Nintendo direct.

Good luck!

Apr 08, 2009 | Nintendo Wii Fit for Wii

Not finding what you are looking for?
Video Game Consoles & Games Logo

Related Topics:

4,008 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Raj Patel

Level 3 Expert

917 Answers

Julian Wainwright

Level 2 Expert

64 Answers

Zhenya Ogorodnikov

Level 2 Expert

218 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...