1999 Jeep Cherokee Logo

Related Topics:

Posted on Jul 20, 2010

Window has dropped douwn in drivers door.how do i remove interior

1999 jeep cherokee 2.5 orvis model

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Jul 25, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Jul 25, 2010
Answers
1
Questions
0
Helped
59
Points
1

  1. i had the same thing happen on drivers door. it was the window motor. it has a cable on it that broke and allowed the window to drop into the door. the motor and cable is all one unit.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers
3helpful
1answer

1999 Jeep Cherokee Sport How do you

I WOULD CHECK THE WIRING BETWEEN THE DRIVER'S DOOR AND THE POST..YOU WILL SEE A RUBBER BOOT BETWEEN DOOR POST AND DOOR..HAVE SEEN PARTIALLY BROKEN WIRES CAUSE ALL SORTS OF PROBLEMS HERE
1helpful
1answer

Replace front passenger power window motor

not hard at all remove the door panel and you will see 5 bolts with a slot so you do not have to remove the bolts just loosen them. There is 2 clips that hold this to the window remove them. The hole thing will come out. Look on E Bay buy a new window regulator $40.
4helpful
1answer

Power windows and doors not working from driver's side buttons

you have a broken wire in the loom between drivers door and body repair this and all doors and windows will operate ok again
2helpful
1answer

99 Jeep grand cherokee...interior lights, door locks, pwr windows

The wires that go into the doors has probably broken from opening and closing the doors.They run though a rubber boot where the hinges are. Check all the doors wires. This is a common problem and i have fix many jeeps with these problems.
0helpful
2answers

1999 Jeep Grand Cherokee Laredo Electrical issues.

the button that pushed in when you close the door could be bad its literally like a $10 part and plugs in and is only held in with one screw. My interior lights used to flash on and off and i replaced that and now good as new, but you would need to figure out which door is doing it by pushing the button in manually
0helpful
3answers

1999 Jeep Grand cherokee

Check the wiring between the drivers door and the A pillar(the body of the car). Sometimes the harness breaks from opening and closing the door.
Not finding what you are looking for?

69 views

Ask a Question

Usually answered in minutes!

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...