Heres my direct email and messenger addy.thas if you dont mind helpin me email@example.com
i really appricate ithe help.i cant afford to have a tv repair man fix it but i may have to have sears come out for 60 bucks and evaluate it.then i can get the parts myself.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
FL231. FUSE.... The RCA ITC222 chasis has a common problem. and it not all that difficult to repair. Does your rca projection tv have read blue and green shadows? Does it have bowing in affect on the top and bottom of picture? when you turn it on does some thin red green and blue line bow in from the top then go away. The main question to determine if you have the fl231 fuse problem is if you go into customer menu then setup do you have the "CONVERGENCE' option. If you do not. then i suspect you have this problem. In the manufactering of these sets Lead free solder is used. now there is great debate over the use of lead free. connection tend to be more brittle. cracks develop around the solder connections of the high voltage flyback transformer. this very small crack set up oscillations in the cuicit with a 400 milliamp fuse. THis fuse cant take it. When this fuse blows the processor then does not know its a projection tv with three projection tubes. it thinks its a crt tube tv. and crt tube tv dont need "convergence" so it removes the convergence from the set.
TO REPAIR... 1. Warning. this set can generate leathal dangerous voltages even unplug do not attempt if you have no experence with electronics. 2. Remove the back. there a number of torx 20 screws. 3. what you will see is a number of circit boards There will be one on the right and one on the left. the one on the right is the small signal board. the one on the left is called the power deflection board. it has a large black part with a big red or black wire coming from the top, this is the flyback.Next to the flyback on the right of it there will be three small rectangular componets tan or brown in color. these are fuses. the one in the middle is the fl231 fuse. 4. getting to this fuse can be difficult. these two cuicit boards sit on a tray that is removable. to remove this tray it is pulled out and up. BUt watch the wires.loosen the wire tyes. 5 when you get the tray up the bottom side of the board can be accessed you will now have to unsolder that fuse. one side of this fuse is under a plastic part of the tray. i have found the easest way is to cut away the plastic to get to it. if you dont want to do this you will have to remove the board. only remove half of the plastic brace 6. REPLACE FUSE RCA PART 259213 7 RESOLDER FLYBACK CONNECTIONS simply heat up and add a little solder 8 reassemble set. make sure you examine the set for loose connections. 9 and remember "BE Careful'
sounds like one of two problems. first could be that the color convergenge chips on the circuit board have gone bad. the parts themselves are not very expensive, but a shop will charge upwards of 300 dollars in labor to do the repair. if you can solder, you could probably do it yourself. second problem it could be is a bad picture tube, but that seems unlikely since they usually last upwards of 20 years before getting weak or dim. if you are located near portland, oregon, i can do the work for you for much less. if you have any questions, please send me an email at firstname.lastname@example.org.
Go to the following link and leave your model number in a email and list which tube you need, they have access to just about any new replacement tube that you need for Sonys. they dont list them all, but leave a email I am sure they will have what you need.Heres the link. http://servicemanuals.vstore.ca/
Dont know where to get one for free but you can get the full service manual for your model emailed to you and They have the lowest price I have seen for the quality of the manuals they have.
Heres the link. http://servicemanuals.vstore.ca/
Convergence amp ic bad http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html http://www.hdtvoice.com/voice/showthread.php?t=28929 Sony Convergence http://www.techlore.com/blog/entry/19694/Sony-Convergence-Repair-My-Sony-TV-has-a-distorted-picture-/ http://www.techlore.com/article/19631/Sony-Convergence-Procedure/
This part will cost you about 650 to 800 bucks my friend. if you have any soldering skills, and can follow directions, I posted a DM board fix. it may just be four small capacitors. Now this set that was used in the fix is not exactly like all the other Mitsubishi TV sets that still have a DM board, but if you can locate the DM board, follow the rest of the repair. if you do not know how to solder, do not take a chance, as this part is way too expensive to be experimenting around with. Get the Capcitors(there is a link there too for the capacitors)and take the DM board to a service shop, as this should not cost you a lot to have a pro do this for you. The DM board fix is located here: