Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Oh Mr. Guru,please help!

Hi there,  Below are posts (2nd one is mine) and you suggested that it might be the hose. Can you say more about why it might be that and perhaps how to repair it? I'd greatly appreciate it.  Thank you,  Shelly

Our washing machine will not stop filling up.  It started just on the rinse cycle and now it won't stop even in the beginning when it is putting water in for the first time.  We replaced the water level switch already (maytag #21001554) and it didn't help.  Any other suggestions?
Have the same problem? Click Here
1 Other User Has The Same Problem Comment by Shellyannwil, posted on Apr 21, 2008This  is happening to me too! Only on the rinse cycle and I can hear water draining out, while it's filling up and the water never reaches the top, therefore, it continues to run. Anyone have any idea of what this could be? I have a newborn and have more laundry than ever!

Posted by on

  • bill_casino May 14, 2009

    i have a moffat washer and it won't stop filling up no matter what water level i have it set on

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 164 Answers

For the second problem wher the water runs and never reaches level, check to make sure the drain hose is higher than the water level. if you allow the drain hose to come out of the machine and lay right on the floor with out first coming up above the height of the tub, the water will run out as fast as it comes in. hope this helps, let me know

Posted on Apr 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HI MR BOYD,WHEN YOU SAID REMOVE EVERYTHING


Mark you need to post this to the Original Post as a COMMENT otherwise Bill Boyd is unlikely to see it.

Feb 12, 2016 | Washing Machines

1 Answer

I have fault of f53 what does this mean


Hi, Below is a post by a previous fault to you washer, I hope this helps you. taurustech
  • Rank: Guru miele.gif
  • Rating: 92%, 159 Votes
i,

this is a tachogenerator fault or the drive motor brushes are faulty. you will need a Miele service tech or a Miele service agent to look at this.

All the credit goes to taurustech

Jul 15, 2011 | Washing Machines

1 Answer

Hi, i have an MW511. All of a sudden it keeps stopping mid cycle with 2 red lights coming on and beeping like crazy. I have re packed the machine, a few times, so its not un balanced, also reduced the...


Hi just read your posting.Now the lights that are on when the machine beeps will be in a row of 8 lights.Starting from the left to right which lights are lit when the machine stops and beeps,Is it the 2nd and 5th or the 3rd and 7th ---etc---?Now to fix the water coming out of the hot hose as the machine is filling just fold the hot hose in half and tape it in this position.This will stop the water coming out of the hose.Please reply with additional information on the lights and I am sure I can help you rectify this fault.Looking forward to your reply.

Oct 14, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Washer will not fill with water


Hi just read your posting.Now have you checked there is water coming out of both inlet hoses by removing the hoses from the machine end and putting the hoses into a bucket and turning the taps on?If there is 100% water coming out of the hose, is your machine beeping and showing an error code as a series of lights which will be lit when the machine is beeping.These lights will be in a row of 8 lights and starting from the left to right which lights are lit when the machine is beeping.Is it the 2nd and 5th or the 1st and 7th ---etc---?.Please reply with additional information on the questions and I am sure I can help you.Looking forward to your reply.

Oct 02, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

I have a nec nw-652 top loader when i start the machine the water fills the tub but at the same time i can hear small amount of water is going down the drain then stops. Once the water in machine is topped...


Hi just read your posting.Now can you please let me know where your drain hose is draining to,Is it into the laundry sink or some place else.Can you see the water coming out of the drain hose?Please reply with additional information and I am sure I can help you rectify this fault.Looking forward to your reply.

Sep 18, 2010 | Washing Machines

1 Answer

2nd 3rd and 5th lights on. washer stopped in the spin cycle and water won't drain. washer won.t come back on


Hi just read your posting.Do you still require help ?Please reply and I can help you rectify this fault.

Jul 12, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

E20 code-Washer not draining properly


Please leave a VERY HELPFUL rating if your problem was sucessfully diagnosed..

Sep 09, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

My washer is giving error code e10 and im not sure what to do my washer is a frigidaire front load


I have an error code chart that came with mine and it says a few different things for E10. 1st says water not entering washer. 2nd says water leaks. 3rd soap dispenser drawer is open. In another post there was something about a magnet needed in the drawer too. But I would suggest checking your hoses and making sure you have water and the drawer is completly closed.

Jan 18, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Bra wire gone inside drum!!!!!!


DLB POST!! SEE ANSWER below From old post Solution #1 posted on Jan 26, 2008 0%20stars.png
1ad4dee.jpg Master_Tech
Rank:guru_s.gif Guru
Rating: 85%, 47 votes

you will have to open the bottom of the unit there is a pump clean out and a hose to the tub you maybe able to get it from there REMOVING the tub is not an option at this point

Jan 26, 2008 | Washing Machines

1 Answer

Kenmore Elite he3T front load, bought 2004


I'm going from memory on the "H F" code: If it stops during a filling cycle, it's probably the small rubber hose running between the pressure switch and the bottom of the tub. Mine had a small hole rubbed in it as a result of it rubbing on the counterweight on the back of the tub assembly. I replaced the hose with some vacuum hose I purchase at a car parts store that had the same inner diameter. I also made sure the hose wasn't rubbing the counter weight when I reinstalled it.

Jan 02, 2008 | Kenmore 46462 Front Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...