Question about Kenmore 16919 Built-in Dishwasher

1 Answer

Normal wash cycle is over 2 hours? - Kenmore 16919 Built-in Dishwasher

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kenmore Master
  • 3,051 Answers

Hello there
If your dishwasher's cycle times are too long, check these: Water pre-heating Cycle not completing Water pre-heating Your dishwasher may pre-heat the water. If so, and if the water entering the dishwasher is cool, the heater may take up to half an hour to heat the water. To avoid the wait, increase the incoming water temperature before turning on the dishwasher. Do that by running the kitchen sink faucet until the water runs hot. Or increase the temperature of the hot water to the entire house at the hot water heater. Warning! To lessen the risk of scalding, don't set the hot water heater temperature higher than 120 degrees Fahrenheit.

Posted on Jul 19, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fisher washer stays on clen for over 3 hours


"Fisher washer stays on clen for over 3 hours" ???
I think you mean the "Dishwasher stays in the clean cycle for over 3 hours", right? First question is "What cycle?" If it's the Pots and Pans cycle, or "Pro-wash cycle" , or "Normal cycle with extra wash heat or sani-rinse options selected, then yes, this is normal! A Normal cycle (without added heat) will take about 2 hours. And a short or quick or 1-hour cycle will take less.

Sep 25, 2014 | KitchenAid Dishwashers

1 Answer

Is there a way to shorten the wash cycle in regards to time(less than 2 hours)? Or is there a rapid wash cycle?


The normal cycle is approx 1 hour. The w4840 has a little more flexibility in wash times.

Dec 25, 2010 | Miele W 4800 Front Load Washer

1 Answer

We just installed a new kenmore dishwasher yesterday. Model 13242 It has been running for almost2 hours and is still on the washing cycle--no water in it however--is this normal? I'm in a bit of a panic as...


THAT IS NOT NORMAL!!!!!!! A normal wash and dry cycle will take approx. 2 hours in length including drying cycle.
You should see that water has been present in the machine within the first 2 minutes of the start of the wash cycle, you should also be able to hear the water entering the wash tub.
The fill valve or water supply seems to be the issue, if the water doesn't enter the tub then the controller won't proceed witht the wash cycle. Double check your water supply tube / hose to make sure there is water present at the connection to the dishwasher.
GOOD LUCK !

Aug 08, 2010 | Kenmore Dishwashers

2 Answers

I have purchased a house with the single door dishwasher and it takes forever to wash - about two hours - what could be the problem?


Check your program settings. If wash quality is good, it's OK. Check your inlet water has sufficient pressure! Refer user manual

Apr 07, 2010 | Fisher and Paykel DS603SS Stainless Steel...

1 Answer

Dishwasher takes 3 hours to wash, even on the light cycle


whirlpool Quiet partner 3 the clean light is flashing 7 times what does this mean

Mar 12, 2010 | Whirlpool Dishwashers

1 Answer

Takes almost 2 hours to complete a wash cycle


Have you ever cleaned it out? Its likely due to a plugged drain, not allowing the system to drain fast enough for the normal cycle. Check out my solution on
http://www.fixya.com/support/t114322-kenmore_elite_h3t_washer

-Todd

Mar 30, 2009 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

1 Answer

The washing cycle takes 2 hours to complete


Make sure the sani cycle is not selected, or pots and pans, also with the dry cycle most will take about 2 hours, if your dishes are not that dirty use the short cycle. Be sure your water is at least 130 F. Run hot water at faucet before starting the machine.

Feb 27, 2009 | Whirlpool 24 in. GU3200XTP Built-in...

2 Answers

1 1/2 PER LOAD


This is joyce
It is according to what cycle you have it set on and what kind of detergent you are using. if you use something other than HE detergent you may have a very long cycle, its trying to get all the suds out of your clothes, and yes the cycles do range that high.

Feb 11, 2009 | Bosch 3.81 cu ft WFMC530 1UC Nexxt 500...

1 Answer

How long should a normal wash cycle take on the whirlpool duet?


One hour and 10 minutes is normal for your washer. All front load washers take a long time. They wash a lot better than top loaders. So to answer your question.. yes its normal.

Nov 19, 2008 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?

Open Questions:

See all Kenmore 16919 Built-in Dishwasher Questions

Kenmore 16919 Built-in Dishwasher Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

Ken Johnston
Ken Johnston

Level 1 Expert

56 Answers

Fred Sops

Level 2 Expert

272 Answers

vince

Level 3 Expert

946 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...