Question about SkyScan 86742 Digital Atomic Wall Clock

1 Answer

Out side temperature reading

Lost outside temperature reading. Removed batteries from clock and outside sensor and waited 30 min. When batteries were installed temperature and clock functioned properly. However we keep losing the outside reading.We repeated the sequence and always get the same results. What am I doing wrong

Posted by on

  • 2 more comments 
  • Anonymous Nov 11, 2008

    YES,NOW THERE NO OUTSIDE TEMPERTURE READING AT ALL, WILL ANEW TRANSMITTER 433MHZ SOLVE THE PROBLEM, MY CLOCK IS MODEL 87700. THANKS WAYNE YORK

  • Anonymous Dec 26, 2008

    Our outside setup fell off and the back came off the battery holder. It didn't dislodge the batteries, but the outside temperature will not show up. How do you contact makers to get info. on how to fix this?

  • Anonymous Feb 07, 2009

    outside temperature will not come up on clock

  • Anonymous Mar 22, 2014

    The clock is not reading the
    Temperature

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,635 Answers

Without having parts to try, this would be difficult to know what the fault is. Inside this unit there is a circuit board, and on the outside there is the exernal temperature sensor.

There are only a few things that can go wrong. There is not much that is servicable unless you can find a spare board, or a spare temperture probe. There is very little posiblity that in any practicality this unit can be serviced at the component level.

I would just go out and buy a new unit.

Jerry G.

Posted on Apr 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have eight atomic clocks,none of them have the outside temperature working,all have new batteries???


If your outside temperature is not showing on your clock, that may mean that the clock and the transmitter have lost their connection. To reconnect them you must first take the batteries out of both of the units for 15 minutes. First put the batteries back into the transmitter, and then the clock. Let them sit side by side inside your home. When both the indoor and outdoor temperatures show on your clock with the same reading, or within two degrees of each other, then you may put your transmitter back outside. Remember to keep the transmitter out of the direct sun in a dry place. Also keep it away from metal, which can affect the readings.

Oct 20, 2014 | SkyScan 86742 Digital Atomic Wall Clock

1 Answer

After changing batteries in both the outside sensor and the inside clock I no longer receive a reading for outside temp.


I have a thermometer with an outside sensor. It's necessary to remove both batteries, wait a few minutes, then replace batteries - sensor first. It may take a few minutes for the inside clock to pick up the signal. If it doesn't, try again with new batteries.

Dec 21, 2010 | SkyScan 86742 Digital Atomic Wall Clock

1 Answer

Skyscan digital wall clock just quit showing outside temperature


you probably need to 'pair' the outdoor sensor with the main base: look for a 'channel' button, as these units usually can get information from several sensors and differentiate them by a channel number.

May 10, 2010 | SkyScan 86742 Digital Atomic Wall Clock

1 Answer

Remote that gives outside temp does not work put in new batteries, still does not work!


Pull the batteries out of the clock, wait a minute, and then put them back in. That will reset the link between the two. The temperature should be OK in just a few minutes. The clock will read the wrong time and date until it resets during the night. The next day, all will be well.

Apr 20, 2009 | La Crosse Radio Controlled Atomic Clock

1 Answer

Outside temperature won't work


Please check the following website for all the info and faq.

http://skyscan.info/content/index.php?option=com_content&task=view&id=35&Itemid=40

Also,

If you have lost the outside temperature on the clock display after replacing the transmitter battery then do the following:

1. Make sure you have good batteries installed in the remote transmitter
2. Remove the batteries from the main clock and keep them out until the clock display disappers.
3. Re-install the batteries in the clock.
4. Wait until the display returns and includes the outside temperature display as well.
5. Set the clock again for current time/date etc.
6. Bingo. You are in business.

Nov 27, 2008 | SkyScan 86709 Atomic Wall Clock

2 Answers

Outside temp on skycam atomic clock


Try changing the battereis in the CLOCK. When the batteries in the clock start getting low, the clock does not pick up the outside transmitter.

Nov 10, 2008 | SkyScan 86742 Digital Atomic Wall Clock

1 Answer

Changed batteries


Please check the following website for all the info and faq.

http://skyscan.info/content/index.php?option=com_content&task=view&id=35&Itemid=40

Also,

If you have lost the outside temperature on the clock display after replacing the transmitter battery then do the following:

1. Make sure you have good batteries installed in the remote transmitter
2. Remove the batteries from the main clock and keep them out until the clock display disappers.
3. Re-install the batteries in the clock.
4. Wait until the display returns and includes the outside temperature display as well.
5. Set the clock again for current time/date etc.
6. Bingo. You are in business.

Sep 07, 2008 | SkyScan 86709 Atomic Wall Clock

1 Answer

OUTDOOR TEMPERATURE


Please check the following website for all the info and faq.

http://skyscan.info/content/index.php?option=com_content&task=view&id=35&Itemid=40

Also,

If you have lost the outside temperature on the clock display after replacing the transmitter battery then do the following:

1. Make sure you have good batteries installed in the remote transmitter
2. Remove the batteries from the main clock and keep them out until the clock display disappers.
3. Re-install the batteries in the clock.
4. Wait until the display returns and includes the outside temperature display as well.
5. Set the clock again for current time/date etc.
6. Bingo. You are in business.

Sep 03, 2008 | SkyScan 86709 Atomic Wall Clock

2 Answers

3M Precision Digital Atomic Wall / Desk Clock with Indoor & Outdoor Temperature and Alarm will not display outdoor temp, i have replaced batteries, outdoor sensor is transmitting, does not appear to...


After replacing the transmitter batteries several times, I tried replacing the clock batteries. They must have been getting low. Once I put in new batteries in the clock it worked fine. Good Luck.

Aug 30, 2008 | SkyScan 86742 Digital Atomic Wall Clock

3 Answers

Manual Information/Owner Guide


Please check the following website for all the info and faq.

http://skyscan.info/content/index.php?option=com_content&task=view&id=35&Itemid=40

Also,

If you have lost the outside temperature on the clock display after replacing the transmitter battery then do the following:

1. Make sure you have good batteries installed in the remote transmitter
2. Remove the batteries from the main clock and keep them out until the clock display disappers.
3. Re-install the batteries in the clock.
4. Wait until the display returns and includes the outside temperature display as well.
5. Set the clock again for current time/date etc.
6. Bingo. You are in business.

FixerUpper

Feb 02, 2008 | SkyScan 86709 Atomic Wall Clock

Not finding what you are looking for?
SkyScan 86742 Digital Atomic Wall Clock Logo

Related Topics:

680 people viewed this question

Ask a Question

Usually answered in minutes!

Top SkyScan Clocks Experts

buzz flewhart
buzz flewhart

Level 3 Expert

655 Answers

The Knight
The Knight

Level 3 Expert

68229 Answers

Pieter Vleeshouwers

Level 3 Expert

1410 Answers

Are you a SkyScan Clock Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...