When I turn the comp on it tries to start. then it starts to bleep ( a bleep every 3 seconds ), I have disc everything ( dvd & floppy ) and just left the the hard drive connected to M/board but still the same, no response from mouse or keyboard. Suspect M/board has gone any Ideas on testing
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
3 bleeps usually relating to memory... try removing and re-inserting RAM and video cards... or try them elsewhere in another machine. It may be wise to remove all the RAMs and add one at a time while trying to reboot.
NOTE: Remove the power wait a few moments before handling each RAM.
Another cause since it's been 'sitting' a while could well be the power supply due to failing capacitors, so trying another wouldn't be a bad idea.
Firstly, pop a new battery in the fob. Now we can enter the EKA. Close all the doors. Turn
the key in the driver door lock to the unlock position and hold there
for at least 5 seconds until the alarm sounds once. Then return to
centre - always ensure you return to centre and do not delay more than
10 seconds between turns, or hold in the position for more than 5
seconds or you will reset to the start. Turn to full extent of travel. 1st
Digit turn to unlock the number of times specified. 2nd Digit turn
to lock the number of times specified. 3rd Digit turn to unlock the
number of times specified. 4th Digit turn to lock the number of times
specified. Finally turn to unlock once more. If it is correct a
double bleep will sound (single bleep is incorrect code) You now have
a 5 minute delay - don't open any doors. The anti-theft indicator will
continue flashing once every 2 seconds for the five minute period. When
this goes out, open the door and start within 30secs. After 3 failed
attempts, the security system invokes a delay period of 10 mins during
which the system will not accept any further attempts to enter a code.
hard drive has fatal error or motherbaord is gone.
Have you recently had any viruses?
If you have the recovery discs this is going to be your only hope.
Turn off comp. turn on and insert dic.
continuously pressF11 to enter bios.
choose to boot form cd/dvd rom
this will start the repair process.
This will reinstall the original operating system, and all drivers that were originally on your system.
CAUTION!!! This will also erase all programs and file you have installed/ downloaded onto your system so be sure to back up anything you dont want to be gone forever.
The reason for this error is that there is a conflict between HD Writer and other software on your computer. I was trying to find a solution for weeks before Panasonic advised me to remove other DVD burning software on my computer. I therefore removed Pinnacle and DVD decrypter (which I believe was causing the problem), reinstalled HD Writer and then everything worked fine. Note however that the DVD-RW discs I had tried to use before were corrupted and couldn't be reformatted and therefore once you have removed the other software and reinstalled HD Writer, start again with new DVD-RW discs. Good Luck.