Question about Canon MP830 All-In-One Printer

1 Answer

Changed the large black ink cartridge but we use the replacements that you need to use the old chip with. Changed the chip over but the printer won't recognize. What am I doing wrong? Thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

Apparently because of using "generic" ink cartridges and not the over priced Canon the printer will not "recognize" the ink levels or monitor but it prints just fine.

Posted on Apr 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just installed new cartridges (3rd set) and printer still says ink is low. How can that be? Is there something I can do to reset the printer color and black buttons. They show yellow instead of green....


Hi
If you replaced the cartridges with genuine Canon cartridges then there's probably a build up of ink under the cartridge carriage. Pull out all the cartridges and lift up the carriage. Clean it using a non alcohol cleaner. While you're at it put some cleaner on a folded up paper towel and wipe the ink reservoir located on the right hand side, where the carriage sits when idle. If you replaced your Canon cartridges with off brand cartridges then you might not have changed the chips over. On the old cartridges there's a tiny chip glued to the plastic in front. This chip must be popped off and snapped onto the new cartridge. Good luck

Apr 06, 2010 | Canon PIXMA MP210 InkJet Printer

1 Answer

Replaced black ink cartridge and printer keeps asking to replace


The message that persists in saying to "replace black cartridge" could be due to a defective cartridge chip. The chip maintains counts and tells the printer when a new cartridge is installed. If you cartridge is remanufactured, they may have neglected to install a new chip.

Regarding the new fuser not working, I'll have to get back to you on that.

Oct 15, 2009 | HP LaserJet 4600dn Color Printer

2 Answers

Canon MX850 will not print from small Black Ink Cartridge - 8BK. It only uses the large black ink cartridge and I have a drawer full of small 8BK cartridges. How can I get it to use the small black...


Canon PIXMA MX850 Multi Function Printer Printer Canon MX850 will not print from... Answer Canon MX850 will not print from small Black Ink Cartridge - 8BK. It only uses the large black ink... (More) Canon MX850 will not print from small Black Ink Cartridge - 8BK. It only uses the large black ink cartridge and I have a drawer full of small 8BK cartridges. How can I get it to use the small black cartridge and not the large black cartridge? Thanks

Sep 30, 2009 | Canon PIXMA MX850 Multifunction Printer

1 Answer

Bad printing after changing 2 inks also clicking noise not before


shouldn't be the ink. I assume you have an epson as in the picture. my ink refill kit mentions that "epson intellidge chipped cartridges" require an "ink level resetter" to complete the kit. So if you have these cartridges even once refilled the chip tells the printer the cartridge is still empty so you'll need to reset the chip with the ink level resetter.

Aug 20, 2009 | Epson Stylus CX6600 All-In-One InkJet...

1 Answer

Black Ink shows empty even after installing on HP Photosmart 3210


These cartridges are really only ik resovoirs for the printer. It does have an ink flow sensor, though. If the printer does not recognize the ink level, it is possible that you got a cart with a bad chip. I refill these alot, and all you can really do is check the chip on the cart and make sure nothing is on the contacts...otherwise replace. A good step would be to put the old cart in and see what happens...

Mar 10, 2009 | HP Photosmart 3210 All-In-One InkJet...

2 Answers

Ink cartridge light keeps blinking


you need to print only in black if that is all the ink you have, and also you need to remove the color cartridge as it still registers in the printer as able to be used, although it is empty or near so. Did you remove the tape over the print head fron the new ink cartridge? Do a print head alignment, or use the toolbox icon to tell the printer that you just replaced the cartridge. Some HP models chip the ink cartridges so even a refill wont register as a full tank and the printer wont print. chip needs to be reset (difficult) or just replaced with a new cartridge.

Jul 07, 2008 | HP DeskJet 940c InkJet Printer

1 Answer

Refilling cartridge


cucujo, you were not as lucky as lovetofish! Sooner or later the printer will win.
The money for printer manufactures is not in the printer, it's in the ink refills. With this in mind many printer Mfg's have added small chips to their ink cartridges. These chips track the amount of times the printer prints. The software knows you are adding ink to the cartridges. Many people find they can get around this by keeping their old cartridges & refilling. Some HP users keep as many old cartridges as three. Rotating ink cartridges. This seems to work for most printers. Suggest you try the same. Continue to fill you're ink cartridge but replace with a new cartridge. When it empties replace with another new. The next three will be re-filled ink cartridges. Always refill as soon as possible, never turn ink cartridges on their sides. Keep refilled cartridges in an airless zip-lock bag, in a cool & dark place when storing.

Mike

May 05, 2008 | Lexmark X3550 All-In-One Printer

1 Answer

New ink cartridge for epson cx6600


If the computer shop said the new chips may not be recognized by the old printers then I would suggest you get an old cartridge which the printer recognizes and a chip resetter for Epson cartridges. Remove the new cartridge w/ the new chips and replace it with the older chip. You will probably need some double sided adhesive. When you pull out the chip you will notice 2 circular areas that hold the chip to the cartridge. One is actually like a small horseshoe so that you can slip it right back in. But the other one has a round flat end on protruding through the chip before you remove the chip. When you remove it, the plastic caves into the hole making it possible for you to remove the chip easily but impossible to put back. So to put in the older chip you need to snip out that piece of plastic so you have space to put in the adhesive. You can even use a small stretch of masking tape by rolling up about half an inch then putting it behind the chip. This way all you need to do it just change the chip everytime you run out of ink. It is a hassle but since you have bought large a supply of cartridges, don't waste it.

Apr 23, 2008 | Epson Stylus CX6600 All-In-One InkJet...

1 Answer

I have changed the black ink cartridge and my lexmark 125 keeps telling me to change the black ink cartridgeand I can not get the thing to copy for me. All it does is keep telling to change the black...


After you get the carriage centered to remove the ink, power off the printer. If you replaced the cartridge with a new cartridge check cartridge for tape residual that might be covering the copper contacts. ( you may not be able to see this).
If you use a refill kit. Most printer Mfg's insert a chip in all there ink cartridges. This chip tracks when you remove an empty cartridge through the printer software. So it knows you replaced the same cartridge forcing you to buy another.
You can also clean the copper ink cartridge contacts with some alcohol & cotton swabs. (Careful not to drip excessive alcohol onto the bottom of the cartridge). Clean the carriage contacts as well. Re-place the cartridge & try again.

Luck!

Mike

Apr 11, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1814 Answers

Corne Viljoen

Level 2 Expert

385 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...