Question about GE Profile Harmony DPGT750EC Electric Dryer

1 Answer

GE Profile Harmony Electric dryer blower issue - how do I access?

I have the same problem as several others with the blower intermittently failing. Blower doesn't work 80% of the time. Anyone know how to dismantle this thing so I can access, troubleshoot, and repair myself?

Would appreciate any help.

Posted by on

  • 2 more comments 
  • cycolac Apr 22, 2008

    manual was sent to me as requested. Hopefully I can figure this out now and save some $$'s by fixing myself.

  • clifton robinson,jr. May 02, 2008

    my ge profile dryer do not heat when motor and blower is running. Please
    help .How do me troubleshoot this problem.How do I access?Can I PURCHASE a manual?

    model #dpgt750ecpl

  • tincup21 Jun 08, 2008

    I have the same problem as everyone else.Motor runs for a short time and shuts off.Anyone know what the best solution would be? Where i can get a replacement motor..etc?Also if there is an 'easy' way to remove and replace motor myself..

  • tom weber Jun 11, 2008

    Blower works intermittenly

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 54 Answers

You have to remove the control panel, dryer top, top heat shield, dryer front, front drum support, belt, and then the drum in that order to get to the heater. I have been working on these since they have been out and have never changed a heater in one, They just dont burn out. Unplug the dryer and take the access cover off where the power cord attaches to the dryer and make sure the wires are not loose or burnt.

Posted on Jul 04, 2008

  • GEtech Jul 04, 2008

    Sorry wrong posting, You still have to go throught the same steps to get to the blower.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a GE profile dryer dpgt750 and it will not get hot only stay wsrm


you need to access the cycling switch and the sensors in the dryer heater/blower housing and possibly replace the drying sensor bars by the door on the unit

Oct 03, 2010 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE Profile Harmony DPGT750EC Electric Dryer not heating


inverter board may be bad. how long have you had the machine

May 07, 2010 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE profile harmony dryer electric won't heat after first load


Did you end up replacing this thermistor? If so did that solve the problem? We are having the same issue and I don't want to waste time and $$.

Dec 22, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

DescrI have a GE profile harmony electric dryer model #dpgt750ec1pl. About 5 minutes into a drying cycle the blower shuts down. There is still heat but no air coming out of the dryer duct. Any suggestions?...


you should not have heat when motor stops there is a switch in the motor to shut the element off....yours is not working(you could burn your house)replace the motor.
PLEASE DO NOT TRY IT AGAIN...can't be lucky all the time

Aug 07, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE Harmony Elec. Dryer Blower Stops working or won't start up


Do this.

press "Home"
press "Help"
press both "My Cycles" and "Back" at the same time and hold them until service mode pops up.
It will tell you what's wrong.

Jul 22, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE profile harmony gas dryer heats up but blower work 2 min. then stops


Have you access the dryers service mode? If not, access it and see what error code you get. Follow this:

1. Press the POWER key to turn the dryer on.
2. Press HELP. The main help screen is displayed.
3. Press and hold MY CYCLES and BACK simultaneously for 3 seconds. Press EXIT to return to the HOME screen.

Once you know the error code, post it or email me and I can help you from there. jeryflores@hotmail.com


Apr 11, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

Blower motor access


You cant you have to remove the control panel, dryer top, top heat shield, dryer front, front drum support, belt, and then the drum in that order to get to the heater. I have been working on these since they have been out and have never changed a heater in one, They just dont burn out. Unplug the dryer and take the access cover off where the power cord attaches to the dryer and make sure the wires are not loose or burnt.

Jun 01, 2008 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE Profile Electric Dryer, Blower nt getting up to speed


On all the ones I've seen with this problem, they've needed a new blower motor. Don't take that as the golden answer because even G.E. tech support doesn't know. It could be the control board, but I haven't seen that yet. G.E. always recommends replacing the inlet thermister, which is accessed through a little cover on the back. Good luck & welcome to the wonderful world of complex electronic appliances. 

Jan 27, 2008 | GE Profile Harmony DPGT750EC Electric...

Not finding what you are looking for?
GE Profile Harmony DPGT750EC Electric Dryer Logo

Related Topics:

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

John Tripp
John Tripp

Level 3 Expert

4636 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...