An expert who has written 20 answers of more than 400 characters.
Re: Dell 924 printer paper jam; don't have a # sign or...
If there is a error msg on the operator panel of the printer, try the following steps
1.press and Hold the start button and the cancel buttom on the printer and holding them down unplug the Power adapter from the printer , wait for abt 30 secs and then put back the power adapter and then release both the buttons.
2. manually move the rollers present inside the paper tray, lift the printer and shake it firmly , turn the printer upside down and gently tab on it , put back the power adapter and then turn on the printer , if it still gives the same error msg , then purchase the new printer
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
On the paper jam ,I tried to pull the ink cartridge over to center. It came over a little & then it jammed up.I noticed the ink cartridge lock tab had popped up & jammed it to the right , once I got the tab back in place the code cleared & it works good now.
I had the same problem and it was really getting annoying. I opened it up and took out the ink cartridges and put them back in then I turned the thing off for about 10 minutes. Mainly so I wouldn't smash it out of anger. When I turned it back on I printed a test page and all was well. I don't know if this will work for you, it seems pretty random but you just never know. Good luck!
Check the paper track- just in case a fragment has ben elft behind.
A suck out with a vacuum may be a good ides to be sure.
Then close it down unplug the mains supply.
Leave a couple hours- then see what happens
If still introuble take a look on here