Failing to install windows 2003 server on compaq ml 370

Don't use Server 2003.

windows server 2003 enterprise edition with SP1 or SP2 , can detect
SCSI driver automatically.

i want to install winxp on srv they give me error win cannot detect detect what can i do

Windows Server 2003 or Windows XP x64? They're the same operating system as I understand it. You must have 64 bit hardware installed on your computer to run a 64bit operating system.

What errors if any are you seeing when you attempt to install this OS?

compaq website

Check this article from Microsoft:

http://support.microsoft.com/kb/283037

Check if the processor fan is running properly. Also check the RAM modules, as these could sometime cause the machine to hang.

Are you attempting to boot from the Windows CD?

If you are booting the server from a Windows installation disk and it is unable to detect the hard drive, this typically means the following things.
You need to provide the driver for the RAID controller of the server (this can vary, depending on the version of the ML370 e.g. G4/G5)
If it still cannot detect the hard drive after providing the driver for the RAID controller or if there is not a driver available for NT4, it may not support the controller.
In this case you can remove the RAID set by entering the RAID setup (could be LSI or adaptec). NOTE THIS WILL DESTROY ALL DATA ON THE DISKS THAT ARE A PART OF THIS RAID SET.

Open the system cover and check whether any LEDs showing amber or Red colour

hdd controler dead or disabled fom bios in the luky case