Question about Computers & Internet

1 Answer

Cat 5 Issue you replied to

Comment by gojira87, posted on Apr 21, 2008 I dont think you follow where I am going, this is the back of a wallplate. The wires need to go in a certain configuration, The wires on the BACK of the plate are not your standard Cat 5 colors. IE Blue Blue/White etc, there are 8 solid colors see my first post. I need to know from the Cat 5 which goes to which color your reply doesnt really coorespond to my quandry. I wish I could post a picture but clockwise the colors I list above are how it looks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 101 Answers

The color is not so important as the cable follow the same standard on both ends.
It has been my misfortune to find non-standard wiring in a facility, so long as they keep the relationship of the pins the same it will work, if the installer did not then you cannot trust any of the work and MUST either redo it all or have it all tested and certified by a cometent network cable installer.
568-B Wiring
Pair Wires RJ-45 pins
1-White/Blue White/Blue 5
Blue/White 4
2-Wht./Orange White/Orange 1
Orange White 2
3-White/Green White/Green 3
Green/White 6
4-White/Brown White/Brown 7
Brown/White 8
568-A Wiring
1-White/Blue White/Blue 5
Blue/White 4
2-White/Green White/Green 1
Green/White 2
3-White/Orange White/Orange 3
Orange/White 6
4-White/Brown White/Brown 7
Brown/White 8
RJ-45 Pins are with the spring tab down and read left to right. Do you have an RJ-45 Crimping tool?

Posted on Aug 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

6 Answers

Upgrade log: ---------- HWK Update Client v 2.1.0.0 ---------- ---------- HWK upgrade started:6/11/2011 7:02:40 AM ---------- -- Target Id : 62 CF 1 10 -- UFSx Boot : UFxBoot V2.2 (c) SarasSoft...


Upgrade log:
---------- HWK Update Client v 2.2.0.0 ----------
---------- HWK upgrade started:8/1/2013 6:34:25 PM ----------
-- Target Id : 62 CF 1 10
-- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
-- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
-- UFSx S/N : 56512
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: TORNADO
-- HWK ID : A1.04-PRO1-DA0064A542600069
-- HWK Status : 1, DL: 0
----------
Locating HWK Upgrade server...
HWK Upgrade server found!
Preparing connection to server...
Connecting to HWKUpgrade server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Error: Server returned unrecognized reply

Jun 11, 2011 | Lantronix CoBox-FL-IAP (COBOXFLIAP11)...

1 Answer

How do i reset password for Alvarion BreezeCOM BreezeACCESS 2.4 Indoor Subscriber Unit Bridge/Router


There is NO way of resetiing the device. You need to get hold of the factory reset device program from alvarion. This allows you to connect to the device and run a small program into which you enter the MAC address of the unit. The software then sets the unit back to factory defaults. You will need to run this program by connecting a cat 5 cable to each of the units you wish to reset and entering the MAC address listed on the device.

Cheers - Chris (Ex trainer of Alvarion Installation engineers)

Mar 15, 2011 | Alvarion BreezeCOM BreezeACCESS 2.4...

1 Answer

How to apply in quintum license file .pls tell me quickly sir


Ok, I would love to help,
Please respond to this using COMMENT or REPLY
I believe this is fixable

Jan 13, 2011 | Quintum Tenor AXT2400 (501014800) VoIP...

6 Answers

How to download hwk update client v 2.1.0


Upgrade log:
---------- HWK Update Client v 2.1.0.0 ----------
---------- HWK upgrade started:6/2/2011 6:35:55 AM ----------
-- Target Id : 62 CF 1 10
-- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
-- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
-- UFSx S/N : 78650
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: TORNADO
-- HWK ID : A1.04-PRO1-DE6985914260006D
-- HWK Status : 1, DL: 0
----------
Locating HWK Upgrade server...
HWK Upgrade server found!
Preparing connection to server...
Connecting to HWKUpgrade server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Error: Server returned unrecognized reply

Oct 07, 2010 | Lantronix CoBox-FL-IAP (COBOXFLIAP11)...

3 Answers

My screen on my norcent computor says NTLDR is missing press contrl alt delete to restart I did all this and takes me back to this screen everytime. This computor is not here with me it as at my sisters...


See here. and here.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Aug 29, 2009 | Computers & Internet

1 Answer

I have tryed to get on line but my pass word will not work.try to get info. but can't had comp. check fr vires found none think smone got my info and changed it please help this is not my comp.


If you need a password to get online and it's not working, you need to contact your ISP, either to reset your password or check your account setup. Usually there is a way to email them a message about your situation, if you go to their support page. Sometimes if the bill's not paid they'll block an account, but otherwise, they are the only ones who can help you to regain access.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!


Aug 24, 2009 | Multitech Systems MVP400 Gateway, VoIP...

1 Answer

Got a flat screan monitor from my sister and connected it to my computer, it has inbuilt speakers but no sound is cuming out of them, the monitor has no volume controll and i have checked the volume...


Have you connected your audio to the monitor?
If you want to get the sound to the monitor, you have to connect it to your computer like you would connect external speakers. Look at this monitor for example. Scroll down the page an you will see the connections like this:

95b378e.jpg
What you need is a cable that looks like this:

66b4825.jpg
You can get it around 5$ (here and here) or at your local Radio Shack or Bestbuy.

If you have any more questions, just come back here and leave a comment - I'm happy to help.



Aug 18, 2009 | APC SmartSlot Environmental Monitoring...

2 Answers

Wiring on a RCA RJ-45 wall jack


the RJ45 wallplate is not meant for ethernet. It's an 8P8C connector for a phone. Will it work as a network jack? Maybe. I wouldn't use it, but if you really want to try, wire it thusly:

1 Blue --- Orange/White
2 Orange --- Orange
3 Black --- Green/White
4 Red --- Blue
5 Green --- Blue/White
6 Yellow --- Green
7 Brown --- Brown/White
8 White --- Brown

I'd still recommend a CAT5 wallplate with a CAT5 jack.

Apr 11, 2009 | Computers & Internet

1 Answer

Cat 5 wiring


Yes you can but depending on the length of the cable, you may not be able to have a connection speed of more than 100 mbps because of the 48V phone line running along the Ethernet link. You have to understand that this is completely outside the structured networks guidelines... but it may be quite useful if you have a lack of cables. So, do that only if you really cannot add another wire without having to destroy you walls or ceilings.

Use the blue and brown pairs for the phone and green and orange pairs for the Internet. Be sure to untwist the pairs as close as possible to the connect point. For that kind of setup, I recommend you to use a BIXed wall plate such as the Belden AX100344 (2 ports) or AX100352 (4 ports).

For the Ethernet outlet, the orange and green wires would go exactly where they should: 3,4,5 and 6.

If you are using a 2 ports plate (AX100344), the blue wires will go into 1,2 and the brown will go into 3,4 of the second outlet. This will make your phone outlet carry the 2 phones lines. Some business phones actually support receiving the two phone lines like this.

If you are using a 4 ports plate (AX100352), exactly as with the 2-port plate, the blue wires will go into 1,2 of the second outlet. Then, the brown wires will go into 3,4 of the third outlet. This way, the second and third outlets will have regular phone lines in which you will be able to plug any kind of domestic phone. Unfortunately, the forth port will remain unused.

This being said, I have explained only how to connect the wall side since I don't know anything about where and how the other end is terminated.

May 06, 2008 | Computers & Internet

5 Answers

Cat 5 wiring issue


I know this is an old thread, but for the sake of helping someone else in the future, I just got off the phone with the Phillips Help Desk and this is the way they told me to wire it up the RJ-11 & RJ-45 combo jack I bought (PH60037):
  • RJ-45
  • Jack colors - CAT 5e
  • Blue - white/orange
  • Orange - Orange
  • Black - white/green
  • Red - Blue
  • Green - white/blue
  • Yellow - Green
  • Brown - white/brown
  • White - brown


  • RJ-11
  • White - white/green
  • Black - white/orange
  • Red - blue
  • Green - blue/white
  • Yellow - orange
  • Blue - green
He said it was the standard configuration used by the phone companies for some time.
Phillips Help Desk # for phones/PCs (800-233-8412)
Hope that helps someone else down the road.

Thomas

Apr 21, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98816 Answers

David Payne
David Payne

Level 3 Expert

14071 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...