Question about Hotpoint Aquarius WF220 Front Load Washer

1 Answer

When i turn on my washing maschine it takes in water as normal but when its time for it to spin it does nothing so it trys to take in more water and the same thing happens again then it turns it sel*** and starts to drain out the water

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 116 Answers

You have to check the water level sensor, included to check the small hose from the drum to the water level sensor. there must be pressure from the water to suppress these sensors, the operation of the washing machine are:
washing process / cycles will start when the water level, which we set is reached. then there is pressure from the water through a hose, pressure water level sensor.

while SPIN is the reverse process of the washing process, water in the drums will be drained through the drain valve. and there is no pressure in the water level sensor so that the spin will start.

Posted on Aug 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset code F21 to a Bosch Maxx 7 washing maschine?


Turn knob to 12 o'clock position
turn to 6 o'clock position
press an hold the spin button
turn knob to 7 o'clock while still pressing the spin button
let go of the spin button after 5 seconds
turn the knob back to 12 o'clock
assuming you have repaired you're f21 motor issue it should behave its self

Mar 27, 2015 | Bosch Washing Machines

1 Answer

GLDT690TBB


Hi,
In order to have a spinning wash '''blades''(arms)...the machine must take water from the tank ...through one pump...manifold...wash arms...dishes..
Can be..impeller of the pump is broken..especially if is plastic one
the wash motor is not running
Good luck

Jun 29, 2013 | GE Dishwashers

1 Answer

Won't spin cycle


when sitting for the last spin it may be out of balance,when you have no cloyhes in it,put 1cup of HE clorox bleach and let it sit in tub over nite,then run on heavy duty wash hot water cycle.(no clothes) this should open up drain pump.this may take several trys.

Jul 31, 2010 | Bosch Washing Machines

1 Answer

Wont start


Clean the trap. take off bottom cover and unscrew larege white stopper

Apr 11, 2010 | Kenmore 46462 Front Load Washer

1 Answer

Washing machine wount spin


Lasat time I saw a similar problem it turned out the motor had a low insulation reading.Check the motors insulation and that should put you on the right track

Sep 22, 2009 | Washing Machines

1 Answer

Trys to spin but stops every time.


Sounds like you have a small clothing garment maybe a sock or similar stuck in the waste pump.

Take the lid off, Follow the bottom rubber hose inwards it connects to the waste pump, remove the hose from the pump and check inside the hose and the pump for clothing, make sure the pump spindle can spin round with your finger. Please make sure the power is switched off before removing the lid

May 29, 2009 | Kenmore Washing Machines

1 Answer

Kenmore Model# 110.25842400


Yes that is the correct lidswitch. (i checked via model # on sears.com) Before you replace the switch, Turn the washer manually into spin and see if it will. If it spins your lid switch is ok. If there is a humming after the washer fills then your motor is bad. It trys to work but cant. if it does nothing after it fills then you have a bad timer most likely. But see if it will spin when you turn the timer to spin manually.

Nov 20, 2008 | Kenmore 24032\24036 Top Load Washer

2 Answers

WASHER WON'T SPIN OR AGITATE


Fisher and Paykel pride 5.5. It is about 11 yrs old

Oct 04, 2008 | Washing Machines

Not finding what you are looking for?
Hotpoint Aquarius WF220 Front Load Washer Logo

Related Topics:

309 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

899 Answers

Todd Arndt
Todd Arndt

Level 3 Expert

2044 Answers

puggy666

Level 1 Expert

48 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...