Question about Diamond Multimedia ( VC500) Video Capture

2 Answers

No signal from Diamond VC500 Capture Device

I recently bought a Diamond VC500 Capture device and installed it onto my 64bit Vista OS. However when I have the device plugged into a usb port and run the one touch program it shows no input signaljust a plain black screen. I have tried using multiple different drivers to get this to work and I have all the correct wires plugged into the device so that I can get some sort of signal but nothing. I've also checked the device manager to see if everything was installed correctly and everything is fine. It'd be really appreciated if someone could help me so that I could finally get this thing to hopefully work.
Thanks

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Have u tried changing the settings format on EZ Grabber to NTCS_M? if not try it.

Posted on Oct 21, 2011

  • Mike Brennan Nov 22, 2011

    I had this same problem as above and the NTCS_M made it work. Now I just need to figure out how to record with it.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

I have a similar problem. Sometimes it works fine, but it will often have sound but no picture in the box. Other times, there is no input signal showing when I click on the gear wheel to adjust settings. There is no rhyme or reason to the missing picture. Whe I play it back, I do have the picture - usually.

Posted on Aug 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My com says the device is in use. how do i fix?


hi,
did you do the step by step install of the drivers ? some OS may detect it as standart video capture device, and won't assign the right pins for capture, so, never use the "detected" driver, always install the ones on the CD, or go to the brand web site to download the latest ones.
then start by installing before pluging it, it will ask you later to plug it (or not), i would also try to plug it in another usb port after install to be sure it loads the good driver...
hope it will help you...

May 14, 2014 | Diamond Multimedia ( VC500) Video Capture

1 Answer

What's wrong with my capture module on my vc500 cxt adapter, audio but no picture


I can't give a solution. I am having the same problem. Used the capture device a few months ago and it seemed to work. Now I can't get the computer to recognize the USB device and I get the same message. Anyone out there that can help?

Dec 05, 2012 | Diamond Multimedia ( VC500) Video Capture

1 Answer

Diamond vc500 "usb device not recognized" i have a


click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers


if you can see your usb drive but its not working

ports(com&lpt)right click update driver if this fails to fix the problem


check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts


hope this helps you

Oct 21, 2011 | Diamond Multimedia ( VC500) Video Capture

1 Answer

I have no sound with a VCR tape to DVD transfer using the Diamond vc500 - using Windows Vista - video is fine


open goole home page download Driver magician instal after update serch all drives click driver opition driver version support relase date


google page open serch driver name version freedownload after instal problem slove its true ............try

Add a comment

Oct 28, 2010 | Diamond Multimedia ( VC500) Video Capture

1 Answer

Diamond VC500 One Touch Capture not recording properly.


Try turning off your screen saver. The recorded file will reset to zero whenever the screen saver kicks in.

Feb 25, 2010 | Diamond Multimedia ( VC500) Video Capture

2 Answers

My Diamond vc500 constantly takes pics HELP!


Check the configuration settings - you may have the automatic frame grab feature activated.

Feb 08, 2010 | Diamond Multimedia ( VC500) Video Capture

1 Answer

No sound when capturing thru One Touch VC600 using PC with VISTA


this is why many people hate vista,....download the driver from the website http://www.diamondmm.com/VC500.php for your device..

May 22, 2009 | Diamond Multimedia ( VC500) Video Capture

1 Answer

Not capturing all the video


Video capture is cpu intensive and you do not want the computer to be distracted in any way during the process lest you incur errors.

Apr 09, 2017 | Diamond Multimedia ( VC500) Video Capture

Not finding what you are looking for?
Diamond Multimedia ( VC500) Video Capture Logo

2,340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Diamond Multimedia Televison & Video Experts

Hipolito Jimenez
Hipolito Jimenez

Level 1 Expert

7 Answers

A Vlad Fuica

Level 1 Expert

23 Answers

Are you a Diamond Multimedia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...