Question about Sharp Office Equipment & Supplies

Open Question

Error code L4-31 on Sharp MX-2300N - Sharp Office Equipment & Supplies

Posted by on

5 Suggested Answers

SOURCE: Sharp MX-2300N

throw it out, buy a Xerox

Posted on Jul 17, 2008


SOURCE: error code h5-01

Yes H5-01 is when it jams in the fuser 5 times in a row, check the fuser section for a jam, the paper jams up in there and does't trigger any sensors, once you have confirmed that its clear reset with sim code 14

Posted on Jun 01, 2008

leroyal
  • 2120 Answers

SOURCE: I have an L4 error

L usually stands for laser problem, not good.

Try unplugging power cord for 10 seconds.

Posted on Oct 11, 2008

  • 75 Answers

SOURCE: can not delete address stored

press in 9 * 8 # 7 on key board press the start key use the # key to scroll throgh the options till clear memory is in the display press enter. this will clear ALL memory & reset it to factory settings

Posted on Nov 20, 2008

SOURCE: Sharp MX-2300N trying to send image to email address gives error

The new fire wall was set up with a password, free the password on the server setup, that should eliminate block.

Posted on Dec 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sharp mx-b201d service manual


google it or contact sharp

Mar 11, 2015 | Sharp MX-B201D Copier

1 Answer

ERROR CODE h4-00


H4-0 = The fusing unit doesn't heat up.

http://www.visualhawk.vcc.ro/sharp_error_codes_en.html

Mar 06, 2015 | Sharp MX-B201D Copier

1 Answer

Mx-b200 error code f2


Replace the drum/toner cartridge with OEM not third party

Aug 05, 2014 | Sharp MX-B201D Copier Machine

1 Answer

Sharp MX-6201n get e7-06 error when scanning to thumb drive


Hi


Error E7-06 means Image data decode error. This appears due to Image expansion error. It has been caused due to MCU PWB abnormality or USB cable trouble
Try using a different USB cable. If this doesn't help then try the reset procedure---

Sharp ram clear -- Press function 9 * 8 # 7 then # or * until display reads memory clear, then press start. Note the other maintenance mode options displayed on the screen when pressing # or *.

Hope this helps...


Daniel

Oct 08, 2010 | Sharp Office Equipment & Supplies

1 Answer

Can not delete address stored


press in 9 * 8 # 7 on key board press the start key use the # key to scroll throgh the options till clear memory is in the display press enter. this will clear ALL memory & reset it to factory settings

Nov 19, 2008 | Office Equipment & Supplies

1 Answer

Sharp MX-4501N Mac drivers 1.1 will not hold black and white colour setting in printing profile (save as)


You are using Bonjour to print to the MX-4501N which uses a generic post script driver. To fix this, you must install the printer using the proper driver from Sharp. For a first time install, download the drivers, install the drivers, restart, and install the printer as an IP printer, specify the IP address, it should be using the LDP (Line Direct Printing) protocol, and specify any additional optonal accessories you have on your MX-4501N. Hope this helps :)

Oct 09, 2008 | Sharp Office Equipment & Supplies

1 Answer

Sharp FO5700


I have never seen this error code on a sharp FO 5700 are you sure that is the right model # or error code. I even did a search in the FO5700 service manual(no luck). I believe I have seen this code before on a sharp copier.

Sep 05, 2008 | Sharp FO 5700 Plain Paper Laser Fax

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

557 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

k24674

Level 3 Expert

7993 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

kakima

Level 3 Expert

100304 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...