The player just stop play dvds and cds, it states disc error. powers on fine but it just won't play. takes a while on loading.

Sounds like it lost it codex. Try to download firmware for it.

Hello,

how long have you been using this player? The problem should be from the lens (laser).

The lens is weak and that's why it cannot read/load Cd's. The weak lens is also what's making it say disc error.

Get a lens cleaner and use it to clean the lens, but if the lens still does the same thing even after using the lens cleaner, then it means you would have to change the whole lens completely to a brand new one.

By so doing your player would play all Cd's with no problem at all.

Good luck.

my cd player in my sonata keep eject the cd can anybody help

SOS

you can clean the motor by the back side

Hi ,
You should do...
1- clean to lens
2-change with new lens
3- change the spindle motor
I hope to fine it.

I have the Denon 2900 (about 4 years of use) and until recently, suffered from the same (growing) problem. CD's were very difficult to start/read. I recently found advice which I tried and was succesful with. It was manually cleaning the laserlens. I took away the outer housing by unscrewing all off the on top (6), side (4) and the back (2) bolts. After that I took out the top plate of the laserunit which took two very little screws taking out. Now you are looking at the cd-tray with the lens. Take a very soft and clean cloth and moisten it a little bit with clean water (be very carefull with the moistening, don't allow any waterdrop to come out of the cloth into the laserlens while cleaning! Carefully clean the lens and dry it with a dry part of the same cloth. Replace the top plate and the outer housing and the player will recognize the discs like it's new again. Good luck! Robert Jan, The Hague the Netherlands

Change your DVD player

I called Samsung. They told me how to do a software reset and solve the problem
1. Take out all CDS.
2. Turn off and then on.
3. HOld down stop for 5 - seconds.

Problem Solved!

your DVDneeds to be adjusted take out the tray turn over the lens there are two shiney screws to the bottom of the lens the one to the right is for dvd and the one to the left is for cd turn to adjust. good luck.

upgrade the firmware on the product.