Question about Treadmill Doctor Image 800Q Treadmill Rear Roller

1 Answer

Running mat keeps moving to the left

My York treadmill mat keeps moving all the way to the left and stays there. Even after following the user manual instructions for proper alignment it still does this.... what do i do? this is a quality treadmill and has not been used much at all...

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Treadmill Do... Master
  • 832 Answers

It looks like you will physically have to inspect the treadmill form under the motor shroud, front roller, frame and to the end where the belt tension bolts are. To see if their anything bent or misalign, this will take some time with good lighting and a extra pair of eyes. You will even have to start the treadmill and watch the entire sequence closely until you see whats happening with traveling running belt. This what I would do Good Luck!!

Posted on Jul 20, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to an Expert (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

York treadmill t301 runs for exactly 20 mins and the E1 displays making motor cut out in this 20 mins keeping the speed at 10 the speed varies but clock stays the same ???


Treadmill Maintenance How To Lubricate Treadmill Belt LED Blink Patterns on the Control Board Treadmill
Follow this steps carefully, in order to fix it.
If the problem persist, time to REPLACE the Controller board motor., by new one or Rebuilt.
Blessing.
cuadra2016@yandex.com
cell+whatsAPP:+50588611441

Oct 14, 2017 | York Exercise & Fitness

1 Answer

How can I find a user manual for a York Pacer 2500 to print please ?


go google and type in--- user manual for york pacer 2500--and if there are pdf versions for download , that is where it will be

Oct 22, 2016 | York Exercise & Fitness

1 Answer

Need owners manual for york experience treadmill?


check at websites such as that below, just put in make and model and the words "owners manual" and hit the search button


Free Treadmill User Manuals ManualsOnline com

Jul 15, 2015 | York Exercise & Fitness

1 Answer

What's the problem of error 1 on my york t520i treadmill that stopped working, I need your help please.


Error 1: Speed sensor error Turn the power switch off and on again to reset the treadmill. If the treadmill returns to normal operation, you may continue to use the treadmill. If treadmill does not return to normal operation, then call the dealer for advice.
ERROR 1 CODE This is a safety feature that can stop the treadmill from functioning. This error can occur because the computer is not receiving the correct information from the speed sensor located near the motor. As a precaution the computer stops the treadmill until it begins to receive the correct feedback. By performing a few simple checks, the error can be cleared quickly and easily, and the treadmill can be ready for use. The treadmill does not move and displays "ERROR 1" Switch off the treadmill at the mains, and then switch it on again. If "ERROR 1" still shows switch off and push the running mat round (1 cycle) using your feet. Then switch back on. If "ERROR 1" still shows, then UNPLUG from the mains and check all of the wire connections made during the assembly. (SEE BOLD PRINT) UNPLUG If the treadmill still does not move, then please contact the helpdesk. Doing this may reset the program error, and the treadmill will be ready to use. This should reset the sensor, and the treadmill will be ready to use. Once the cables have been checked, turn on the treadmill again. This should eradicate the problem. 1. 2. 3. When assembling, there are several cables that need to be connected. It is very common for these cables to look like they are connected when they are in fact not fully connected. Make sure that these cables are connected as tightly as possible. The connections may have come apart whilst assembling the treadmill. here is a link to your treadmill web site http://www.yorkfitness.com.au/uploaded/pdf_71T520i%20Treadmill_5562.pdf

Mar 02, 2015 | York Exercise & Fitness

1 Answer

How do you check a curcuit board on a york treadmill


1) RUN the software calibration for diagnose, and troubleshooting and fix it.
2) see you instruction manual and follow the step.
God bless you

Jun 28, 2012 | York Exercise & Fitness

1 Answer

Motor not going on York Optimum 60100 - after a while E 1 appears


Dear Sir:
This is probably a 1) faulty speed sensor or 2)the speed sensor is not plugged in properly. Its also possibly a 3) faulty motor control board or lower board 4) Main motor faulty. . The error codes will differ between makes and models but could be e1.You must test

see my personal TIPS for diagnose and troubleshooting.

See if you can run the software calibration for diagnose and trouble.

sincerely. God bless you.

ernesto cuadra
managua, nicaragua. c.a.

Mar 05, 2012 | York Exercise & Fitness

1 Answer

I lost my manual for the York Pacer 3100, where can I download the manual? I also need to replace the running mat but I don't know the part number.


Try this 3 web page:

1) Free. http://fitness.manualsonline.com

2) Pay:www.fitnessrepairparts.com

3) Pay: http://manualsfactory.com

e.cuadra

May 24, 2011 | York Barbell Home Use Fold-Up Treadmill

1 Answer

My york treadmill pacer 3700 show error


I have just got a pacer 3700 off a friend and she had no manual for it. it keeps saying error 1 and wont do anything. what can i do to make it run again?

Oct 27, 2009 | York Exercise & Fitness

1 Answer

Hi, have lost the manual for my treadmill York T500 treadmill. Error 7 keeps coming up...what does this mean please?


Error 7 is a Safety Key Error....
That's the red circular magnetic insert that slots into the front of the console...
The manual says : Simply secure the safety key in place and then 
try again..
hope this helps

Apr 20, 2009 | York Barbell Home Use Fold-Up Treadmill

1 Answer

The Walking Belt keeps staying close to the right side


speed the belt up to around 4mph while adjusting the belt. you will see it centre very quickly. once centered leave it to run for a couple of minutes to see if it stays central.

Apr 16, 2009 | Reebok New York Giants Eli Manning Jersey

Not finding what you are looking for?
Treadmill Doctor Image 800Q Treadmill Rear Roller Logo

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Treadmill Doctor Exercise & Fitness Experts

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

129 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

297 Answers

fordexpert

Level 3 Expert

5610 Answers

Are you a Treadmill Doctor Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...