Question about Kodak Easyshare C813 Digital Camera
You don't need any software.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or, despite what I said first, you can use any photo cataloging program such as Picasa.
If you really want Kodak software, you may download it from here.
Posted on Oct 11, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
May 05, 2014 | Acer Extensa Computers & Internet
on Jan 19, 2010 | Computers & Internet
on Dec 31, 2009 | Computers & Internet
Feb 13, 2013 | Dell OptiPlex GX270 PC Desktop
When you download the Setup disks, the download contains only one large program file. When you run the downloaded file, it extracts the files. You receive the following message:
This program creates the Setup boot disks for Windows XP. To create these disks, you need to provide 6 blank, formatted, high-density disks.
Please specify the floppy drive to copy the images to:
Type the drive letter for the floppy disk drive (this is typically drive A). After you type the floppy disk drive letter, you receive the following message:
Insert one of these disks into drive drive letter:. This disk will become the Windows XP Setup Boot Disk.
Press any key when you are ready.
When you press a key, the downloaded file starts to extract and copy the files. Continue to insert the blank disks as you are prompted to do this until all six disks are created. If the process is interrupted, you must run the downloaded program file again to create all six disks.
Make sure that you label each disk appropriately with the number that is specified by the program. You must use the disks in the correct order during the Setup process.
Step 3: Start your computer by using the first Setup disk to begin a new Windows XP installation
After you create all six disks, insert the first disk in the floppy disk drive, and then restart the computer. The computer must be configured to start from the floppy disk drive. You may have to modify the BIOS settings on your computer to do this.
The Setup process starts. Insert the other floppy disks when you are prompted. You must use the Windows XP CD-ROM to finish the Setup process.
hope it helps
May 13, 2012 | Microsoft Windows XP Professional With...
Mar 19, 2011 | Televison & Video
May 29, 2010 | Iomega ZIP 250 External ZIP Drive
Mar 11, 2010 | Compaq Presario 1692 Notebook
Nov 25, 2008 | Lenovo ThinkPad T61 Notebook
Dec 09, 2007 | Intel Server Board SE7505VB2 Motherboard
Sep 13, 2017 | Kodak Easyshare C813 Digital Camera
Jun 05, 2017 | Kodak Easyshare C813 Digital Camera
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: