Question about Televison & Video

1 Answer

I have a 42" Sanyo HDTV everything was fine was on turned it off when i left went to turn it on that night and nothing but the power light.. help?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,361 Answers

Unplug it for about an hour to let it reset itself first, if it still does not work then you will have to open it up or take it to the repair shop.
Power supply module will be the first place to start, voltages cehcking and caps inspection are needed. The problem can be the power supply, main logic board.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Parts: www.shopjimmy.com

Posted on Jul 18, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The tv comes on then clicks off


Mine I will do this if the cable box is not turned on fist.

Feb 28, 2014 | Sanyo DP42849 42 in. HDTV

1 Answer

Sanyo DP 42849 42'' lcd tv no audio no video


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Jul 03, 2017 | Sanyo DP42849 42 in. HDTV

1 Answer

My TV was working fine last night but there does not seem to be any power this morning, everything in plugged in and I have turned it off at the mains, but nothing is happening, please can you help?


Power Supply EAX55357701 I rebuild these all the time at work I am a technician at a casino and this happens all the time the power supply can be bought online

Jun 10, 2010 | LG 42LC2D 42 in. LCD HDTV

2 Answers

Last night the tv was fine i turned it on this


Unplug 20 minutes. Make sure there is adequate ventilation around the set.

Try with the original manufacturer remote to view setup menu.

Power outages come at night. This sometimes resets the TV and other devices. .

Mar 25, 2010 | Insignia 42" LCD Flat-Panel HDTV

1 Answer

Power Issue 42" plasma flat HDTV Pixel Plus


you ip board is bad go t0 this site partstore.com typ in the modle of tv and buy it . works like brand new .trust mr it did and saved a lot

Apr 07, 2009 | Samsung SPN4235 42 in. Plasma HDTV

2 Answers

Mitsubishi WT-42313 42 in. rear projection tv


I guess I have to pay money for a solution, which is not what this website says. The only answer I got was pay money and we'll tell you. Is that true/

Sep 16, 2008 | Mitsubishi WT-42313 42" Rear Projection...

1 Answer

Tv won't turn on


I had a similar problem when there was a power outage or the lights went briefly out. I unplugged the TV and left it for a few days/weeks and then plugged it in and the TV worked. I think newer TVs should be treated like a home computer and put them on surge protectors.

Jul 08, 2008 | Televison & Video

1 Answer

Sanyo camera will not turn on battery is fully charged


First you check ur battery power still constant if not check ur memory card .Empty. ur memmory card through another card reader then on ur camera without putting MC.
in this way ur probleum will solved.
thanks.

May 11, 2008 | Cameras

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75169 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5340 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...