Question about Washing Machines

2 Answers

I keep getting an F11 code on my washer and i can not read the complete solutions listed below. my whirlpool is model wfw9200sq02, serial csu4810105. what needs to be done please?

Posted by on

  • Anonymous Mar 19, 2009

    wfw9200sq00 whirlpool front loader powers up and fills then does nothing for about 3 minuites then fll code comes up

×

2 Answers

It might helpme if i knew where to find all the things you said to check, but i don't have any diagram for th inside. thanks anyway

Posted on Apr 21, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 101 Answers

F/11" Serial Communication Error
Communication between the Central Control Unit (CCU) and the Motor Control Unit (MCU) cannot be sent correctly.

  • Check Wire Harness connectors to the MCU, the motor, and Central Control Unit (CCU)
  • Check the Drive system for any worn or failed components
  • Check MCU
  • Check CCU
  • Check Motor
  • Check Wire Harness

Posted on Apr 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does an F-1 code mean on the display? washer will not start.


power problem

  • Whirlpool Fault Codes - AppliancePartsPros.com www.appliancepartspros.com > Appliance Repair Whirlpool Range / Stove / Oven Fault Codes: Failure Code: Fault Code Description: Solution: 4 Digit Failure Codes (for 2 digit codes see below) F1 - E0
  • Washer Diagnostic& Repair - F1 Error Code power supply ... www.youtube.com/watch?v=BAVS9mI3JLQ
    • BY APPLIANCEVIDEO.COM
    • 4 MIN
    • 65K VIEWS
    2014-02-07 · Troubleshoot your trusty Whirlpool Top Load Washer that has these following symptoms: F1 Error Code At: http://www.appliancevideo.com To ...
  • Whirlpool Cabrio f1 error and how to fix it https://whirlpoolcabriof1error.wordpress.com Control board W10189966 will work with the Whirlpool model numbers listed at the bottom of this page. These models include the Maytag Bravos and Kenmore Oasis.
  • whirlpool F1 code - Appliance Repair Forum forum.appliancepartspros.com > ... > Washer Repair
    • 68 POSTS
    • FIRST POST: 2008-07-28
    2009-09-29 · Discuss whirlpool F1 code in Washer Repair. "whirlpool cabrio washing machine displays f1 code. have already pushed cancel and restart to no avail.
  • Cabrio Washer by Whirlpool F1 Error Code - Facebook www.facebook.com/CabrioWasherByWhirlpoolF1ErrorCode Cabrio Washer by Whirlpool F1 Error Code. 793 likes. Got the F1 Error Code? Tell your story! Share ALL your issues with this washer to warn others...
  • Whirlpool Fault Codes - Appliance Help Online appliancehelponline.com/whirlpool.html Whirlpool Range / Stove / Oven Fault Codes: Failure Code: Fault Code Description: Solution: 4 Digit Failure Codes (for 2 digit codes see below) F1 - E0

  • May 04, 2016 | Whirlpool WTW8200YW Cabrio Top Load Washer

    1 Answer

    Whirlpool duet washer error code F11


    The F11 code means that the CCU (central control board) and MCU (motor control board) aren't communicating properly. This can be caused by poor contacts between the wires in the wiring harness and one of the boards. Someone reported a simple fix of carefully adding solder to thicken the contact area on the board where the wiring harness plugs onto the board.

    First unplug the washer. You need to check the wiring for any broken conductors. Try wiggling the wiring harness on both sides to see if that helps the connection stabilize. If wiggling works, then the solder solution may work. Warning: make sure to keep the new layer of solder directly on top of the previous contacts. If the solder spreads sideways, you can short the unit. Otherwise, the solution is to replace the CCU. If that doesn't solve the error, Whirlpool recommends replacing the MCU.

    If you add the model number for your washer, I may be able to point you to the parts list. I hope this helps.

    Cindy Wells

    Aug 02, 2015 | Whirlpool Washing Machines

    1 Answer

    Cycle will not spin and drain properly near end of cycle. Keep getting F11 fail codes when I try resetting my kenmore elite HE 3t any suggestions?


    Hi Shaun, I just found (and watched!) a good youtube video which may help with your problem regarding the F11 code, link follows below.
    Trust this helps, best regards Alan
    Troubleshooting and Repairing the F11 Error Code in Whirlpool Duet Washer

    Feb 12, 2015 | Kenmore Washing Machines

    1 Answer

    Whirlpool Duet Sport Model WFW8300SW0 basket won't


    The following list of codes indicates an electronics communication problem with the washer: - Duet HT washer - F01, F03, F06, F11, F23, F24, F27, F28, F29, F30, F31, F32, F35, F42, F61, F62, F63, F64, F65, F70, F71, and F99

    If Pause/Cancel does not work:
    1. Unplug washer or disconnect power for one minute.
    2. Plug in washer or reconnect power.
    3. Re-select the cycle and press Start.
    NOTE: If the error remains on the display, call for service.

    I would first replace the door latch/lock assembly, a number of users have and it fixed the F-11 error code completely. Its the cheapest part for this problem.

    Hope helps.

    Jun 27, 2011 | Whirlpool Duet Sport HT WFW8400TE Washer

    1 Answer

    F11 and/or dl code on a whirlpool duet front load washer


    F11 is:
    Serial Communication Error
    Communication between the Central Control Unit (CCU) and the Motor Control Unit (MCU) cannot be sent correctly.
    Check for:
    Check Wire Harness connectors to the MCU, the motor, and Central Control Unit (CCU)
    Check the Drive system for any worn or failed components
    Check MCU
    Check CCU
    Check Motor
    Check Wire Harness

    http://www.fixya.com/support/r666194-f11_error_whirpool_duet_kenmore_elite

    Check the above link for a detailed article about the f11 error code.
    Courtesy:JSrock

    Apr 01, 2010 | Whirlpool Duet GHW9150P Front Load Washer

    1 Answer

    Whirlpool ghw9150pwo f11 error code


    f11 Serial Communication Error

    Communication between the Central Control Unit (CCU) and the Motor
    Control Unit (MCU) cannot be sent correctly.


    * Check Wire Harness connectors to the MCU, the motor, and Central
    Control Unit (CCU)
    * Check the Drive system for any worn or failed components
    * Check MCU
    * Check CCU
    * Check Motor
    * Check Wire Harness

    Nov 04, 2009 | Whirlpool Duet GHW9150P Front Load Washer

    1 Answer

    ERROR F11 (Whirlpool Duet GHW9300)


    Hi there this is as it reads for your fault code F11


    Serial Communication Error
    Communication between the Central Control Unit (CCU) and the Motor Control Unit (MCU) cannot be sent correctly.
    • Check Wire Harness connectors to the MCU, the motor, and Central Control Unit (CCU)
    • Check the Drive system for any worn or failed components
    • Check MCU
    • Check CCU
    • Check Motor
    • Check Wire Harness

    Feb 10, 2009 | Whirlpool GHW9300 Duet Washer

    1 Answer

    F 11 error code on Whirlpool Duet - Serial Communication Error ?


    Your F11 Code is stateing these things but if it is intermittent probabbly a loose connection.


    Serial Communication Error
    Communication between the Central Control Unit (CCU) and the Motor Control Unit (MCU) cannot be sent correctly.
    • Check Wire Harness connectors to the MCU, the motor, and Central Control Unit (CCU)
    • Check the Drive system for any worn or failed components
    • Check MCU
    • Check CCU
    • Check Motor
    • Check Wire Harness

    Jan 20, 2009 | Whirlpool GHW9300 Duet Washer

    1 Answer

    F11 code


    unfortunately whirlpool wont provide much support on these models, and sears hasnt a clue, but go to servicematters.com on whirlpool support- tech sheets use model# with out the 110. and you should be able to get a tech sheet with a code list. essentially a duet
    does the lock seem to act up or is it not draining completely?
    if its a slow drain check hose, make sure its not shoved in all the way, about 6 in. is it. check pump clean out at bottom. right behind lower kick panel. door lock mechanisms are common problems as well.

    Jun 03, 2008 | Kenmore Elite 45986 Front Load Washer

    Not finding what you are looking for?
    Washing Machines Logo

    Related Topics:

    198 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Washing Machines Experts

    Dan Webster
    Dan Webster

    Level 3 Expert

    8147 Answers

    Richard Roth
    Richard Roth

    Level 3 Expert

    9472 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    Are you a Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...