Question about Maytag SkyBox MBV1976A Beverage Dispenser
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Vending machine issues
Only the fan at the compressor turns on and off with the compressor cycle. The evaporator fan runs steady to maintain air circulation and temperature balance and to affect evaporator defrost in the off cycle. Sometimes the condenser fan will run continuously to assist in the evaporation of condensed moisture from the evaporator drainage.
Posted on May 30, 2008
SOURCE: Maytag Skybox dispenser
I also have one of these vending machines. The problem Maytag had with these and the reason why they are discontinued is that it was not made with an automatic defroster. SO, ice litterally builds up on the entire motor in the back and then the buttons do not work. Here is an easy test. Unplug the machine for 24 hours and if there is ice on the motor it will melt off(to where I dont know!!). Try the buttons again and see if they work. Mine did. They also had to come out and replace one of the pieces inside because the ice broke it! Mine by the way does not work anymore because the other problem they have had with these is that the compressor goes bad!! Once THAT happens, its more expensive to fix than it's worth! Good luck! Maytag SUCKS!!!
Posted on Nov 13, 2008
SOURCE: I need to know which
Since i donot know the exact model of the vending machine you have . I'm attaching the the link for service manual that has the wiring diagram for the two models. In case your model is not the same as listed . Please give me the model number , so that i can send the link accordingly
Thanks for using Fixya
Posted on Sep 26, 2010
Have you tried cleaning it underneath?
Unplug it and from the back and underneath get all the dust and debris out. When it's clear, leave it on number 3 for 6 to 8 hours and see what happens.
Posted on May 28, 2011
Tips for a great answer:
May 05, 2014 | Maytag SkyBox MBV1976A Beverage Dispenser
Aug 18, 2010 | Maytag SkyBox MBV1976A Beverage Dispenser
522 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: