Question about Canon PIXMA MP600 all-In-One InkJet Printer

Open Question

Canon mp 560 is not printing in color after new ink tank been replaced.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
informatica
  • 1114 Answers

SOURCE: canon muti-pass MP360 INK TANK FULL

I believe what you are seeing is "WASTE INK TANK FULL"? This means that the tank that collects the waste ink from cleaning the head is full. You can read more than you ever want to know on this subject on the following link: http://www.fixyourownprinter.com/forums/printer/38697#1 These are the steps to clear the message by reseting the counter: 1)Printer on, press Additional Functions, Scan, Copy, Scan Now you should be in service mode from there for waste ink tank reset 2)Select Test mode which is like the last available selection 3)Select #8 Printer Test, it will do something here like cleaning or something then it will come up with some other options this is where it gets a bit confusing cause now all it says is like 8-2 or 8-3 push the + or - button until it says 8-3 then hit the select button The menu will now say EEPROM Clear Select Ink count which is option (0) and press set Your done!

Posted on Aug 03, 2007

Ad
romeo_robu
  • 20 Answers

SOURCE: how to reset ink cartridge for mp 160

First, download the software at http://www.box.net/shared/4yblbn34kg

Secondly, to run the software your printer has to be in service mode. Do that by
- unplug cable
- press and hold "power" button
- plug cable
- press "resume" and release
- release the "power" button
At this stage, your computer will detect a new hardware

Run the software.

Posted on Aug 14, 2009

SOURCE: MY Canon Pixma MP 500 Printer won't Print.

Reset the device when it is not functioning properly. If the device is not functioning properly or to clear memory, reset it.

  1. On the operator panel, press and hold the <ON/OFF> button for one second. (The display will go blank.)

  2. Wait approximately ten seconds and then press the <ON/OFF> button again.

  3. Wait until the device has completed its cycling process before submitting another job request.
  4. To clear error messages displayed on the LCD or if the printer is not functioning as expected, it may be necessary to simultaneously press Stop/Reset and ON/OFF buttons.
  5. With the printer powered on, press and hold down the <Stop/Reset> button then press the ON/OFF button.

  6. Once the printer is powered off, hold down <Stop/Reset> and then press <ON/OFF>.
  7. clear any paper jam
  8. May be your product requires repair service.

Posted on Apr 03, 2008

hichama9
  • 65 Answers

SOURCE: Canon MP 560. Is there any way to set this printer

Hello my friend,
you will need to access to the printer propreties via Control Panel ==> printers ==> right click on this printer and choose proprieties and then you can setup the general settings of the printer and there you can select the default mode to use which will be black and white.
Best Regards,

Posted on Oct 30, 2009

komguy
  • 2306 Answers

SOURCE: Canon MX850. Print blank after ink changes.

That is a common problem on all Canon printers, the purge assembly on the right where the printhead parks, has a pump inside and hoses that go to the filters and ink absorbers. When that unit goes out you need a replacement. A job best done in a shop. When the printhead is not cleaned and primed properly you get blank pages no matter how full the inks are.

Posted on Dec 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We can't get our wireless canon printer to print from our new HP laptop, can you give us any help on what we can do?


mp 560
and

I'd say avoid. I used to love Canon printers. I could not praise them enough.

I thought I'd buy Canon printers for ever. I have recently bought the MP640 which replaced the 610 that I had and was the most tremendous printer even.

The 640 cost me £180 ($265) and it is shocking. Black text comes out charcoal grey colour and any black in graphics is nowhere near black, again it's a charcoal grey that is horrible.

The 560 uses the exact same ink cartridges so you will presumable have the same problem with text as the pigment black that is used for text is not black. If the cartridge is dabbed on a sheet of kitchen paper to transfer ink it is very pale black (this photo black by the looks which is basicly just a paler versions of regual ink) and this will reflect in the text.

I wish I had never bought it as I know am going to buy an HP printer and this thing will be used only if I am desperate for a printer if mine breaks when the shops are closed!

Some reviews of the 560 are good but the 560 is also seen as an ink guzzler in others. The ink cartridges are very smaell and when I took mine out of the box I could not beleive how small. Small cartidges equaly running out quicker = more ink to be bought = more profit for Canon. My ink lasted a week and I printed only about 20 sheets.

It constantly runs cleaning cycles and primming cycles that use ink and fill up the waste ink pad which will need replacing probaly not long after the warrant is gone and it was cost as much to have it replaced as buying new printer.

Ask if you can have a demonstration of it before you are committed to it before possible wasting your money on it.

The 640 is Canon's idea of improvement that they seem to have only done for the sake of saying we have made this new model. The 560 will printer similar if not worst as the MP640 has a very high print head resolution - which pitty help if it it did not!


Jun 09, 2010 | Office Equipment & Supplies

1 Answer

Replace ink for canon 560


Check your user manual,page 8 . if you do not have one you can download on line.
Here are a few steps,
Open the paper ouput tray, turn the printer power on, lift the scanner module up making sure the cover is closed.
The print head will come to the middle, pull out the old tanks as shown in the graphics, replace with new once.
Close the scanner down, the printer will do a setup routine. you are done. good luck.

Mar 14, 2010 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Hi Ihave a MP-500 that prints off color.


You need a new printhead, QY6-0059-000, around $60.00. They do wear out and also plug when you use generic inks.

Oct 23, 2009 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

Help with error 1401


To print without color ink go to START>control panel>PRINTERS & OTHER HARDWARES>PRINTERS & FAXES>Right click to your printer>PROPERTIES>MAINTAINANCE>INK CARTRIDGE SETTING>then select BLACK ONLY.
I think it fix your problem.

Nov 13, 2008 | Canon MP140 PHOTO AIO All-In-One InkJet...

1 Answer

Cartridge recommendations


You can purchase Canon cartridges directly from Canon here. The BC-10 is a cartridge that prints with black ink only. The BCI-10 is the replacement ink tank for this cartridge (a new cartridge comes complete with an ink tank). The BC-11e is a cartridge that prints both black and color, and has two ink tanks, the BCI-11 black and BCI-11 color. A new BC-11e cartridge comes complete with two new ink tanks.

Oct 03, 2008 | Canon BJC 80 InkJet Printer

2 Answers

How to reset ink cartridge for mp 160


First, download the software at http://www.box.net/shared/4yblbn34kg

Secondly, to run the software your printer has to be in service mode. Do that by
- unplug cable
- press and hold "power" button
- plug cable
- press "resume" and release
- release the "power" button
At this stage, your computer will detect a new hardware

Run the software.

Sep 05, 2008 | Canon PIXMA MP160 All-In-One InkJet...

2 Answers

Canon multifunction printer


I believe that he is reffering to the waste ink tank where the cartriges stop to the right when not being used. There are two small foam pads over there.
I cleaned mine by opening lid and have carriage run to the left, then I reach in with a q-tip and press down repeatly until q-tips are almost clean. You will need a flashlight to see waht you are doing.

Feb 18, 2008 | Canon PIXMA MP130 All-In-One InkJet...

1 Answer

PIXMA IP1500 - CANON PRINTER


Confirm that the ink tanks are installed properly When replacing the ink tanks, confirm that the new ink tanks are installed properly. If the ink tanks are not locked into place, paper may not be fed properly, or ink may not be supplied to the print head.
  1. Check that the printer is powered on and open the front cover.

  2. Wait until the print head moves to the center.

  3. Check if the ink tanks are installed properly.

    ip1500_ink_installed_correct.jpg


    Ink tanks installed correctly

    ip1500_ink_installed_incorrect.jpg


    Ink tanks installed incorrectly

  4. When installing the ink tanks, push the top of the ink tank until a click sound is made.

    Note: If the ink tanks are not installed properly, paper may not be fed properly, or ink may not be ejected.

    ip1500_ink_install_animated.gif

  5. Close the front cover.

Jan 09, 2008 | Canon PIXMA iP1500 InkJet Photo Printer

Not finding what you are looking for?
Canon PIXMA MP600 all-In-One InkJet Printer Logo

Related Topics:

512 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2140 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...