Question about LG BLUETOOTH? HFB-300 NOISE CANCELING SPEAKERPHONE SGBF0000105 Wireless Headset

1 Answer

Hfb300 how do i connect it to my mobile phone

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Turn the unit on using the large button that has a phone on it. once the unit is on then put your phone into "pairing mode" (see phone instructions for how to do this) and then hold the "mute/function" button for up to 10 seconds until it beeps and the blue light flashes on and off every one second. then your phone will discover the unit and ask for the passcode which is 0000, enter this on your phone and the pairing will complete with a beep from the HFB-300. the unit will pair up to 3 phones in the same way and will only recognise 1 phone that is on at once so you need to only switch bluetooth on for one phone at a time. if you pair more than 3 phones then the unit will automatically drop the oldest existing one it already has stores

Posted on Aug 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect bluetooth headset to my nokia c5-03 phone


Hi Madhav,

Thank you for your question at Fixya,

The solution to your problem is as follows :-

  • The blue tooth connection depends on the fact as to whether or not the bluetooth handsfree that you have is compatible with your phone or not , a good idea would be to check it before you buy one.
  • Now if you want to connect your bluetooth handsfree to your mobile , you need to first make sure that your phone's bluetooth connection has been switch on and then it's not hidden and it should be in shown to all mode as this is a nokia phone.
  • When you switch on the bluetooth connection in your phone , then you need to switch on your bluetooth handsfree and then keep it on.
  • Then again you need to go back in the bluetooth option and then select search for paired devices option or new paired device option , then the phone will search for available bluetooth connections.
  • If it detects your bluetooth , please accept that connection and then it will ask you for a pass code , which you have to enter as 0000 and then press ok.
  • That's it! you will have your phone successfully connected to your bluetooth handsfree.

Hope that helps ...:) In case you have any queries, feel free to contact me.

Sep 19, 2011 | Motorola Mobility Bluetooth Headset, Mini...

1 Answer

How to connect it


Dear user you can connect your bt device your mobile there are given some steps
1.open the bluetooth of your mobile phone
2.search for audio device
3.pair with your mobile
4.after that your bt device will be connect wirh your mobile your
NOTE: MAKE SURE THAT YOUR BT DEVICE IS SWITCH ON OR NOT?

Jul 05, 2011 | Plantronics Explorer 240 Bluetooth Headset

1 Answer

How do I put this bluetooth (ant Z9i)into pairing mode? please be detailed as possible...


Pairing Procedure (This is an example only and may differ from your phone, but the process will be the same.)
1. First turn the phone OFF and then back ON again to refresh its memory.
2. Bring the mobile phone to about 30cm from the Z9i Dual Microphone.
3. Find the Bluetooth menu in your mobile phone. Turn Bluetooth ON. (Check your mobile phone user guide if necessary)
4. With the Z9i OFF, Press and Hold the MFB for about 6 seconds. The LED will appear a solid Blue, and then will start fl ashing. The
Z9i is now in Pairing mode and ready to be found in searches by other Bluetooth devices. Pairing mode will be active for 2 minutes.
5. Perform a Bluetooth device discovery on your mobile phone to add a new device. (It takes a few seconds to search for
and fi nd other Bluetooth devices around you).
6. When Bluetooth devices are found, the phone will display “BlueAnt Z9i”. Scroll to it and press OK to confi rm that you
want to Pair with it.
7. Enter Passkey “0000” when your phone prompts you. The phone and Z9i will now Pair.
8. An additional security setting in your phone may be needed to allow the headset and phone to connect automatically
without confi rmation each time you connect your Z9i. Generally in the options for the BlueAnt Z9i, it will be referred to as
“set as authorized”, “add to trusted devices”, ‘’allow connection’’ or similar.
9. If required for fi rst time connection, select the BlueAnt Z9i to connect with your phone. OR, Click the MFB on the Z9i,
to connect with the phone.

You can get the manual on link below. page 9 tells you how to pair.

http://myblueant.com/downloads/manuals/Z9i_manual.pdf


good luck and please rate 4 thumbs for the free answer

Mar 28, 2010 | Blueant Z9i Bluetooth Headset

1 Answer

I need to know how to connect it to my phone


The owners manual for the Aris21 Bluetooth Headset is available here:
http://files.anycom.com/documents/manuals/cc3101-manual-en.pdf

Specific instructions on how to connect it will depend on your Bluetooth mobile phone model. Typically, this has to be done by going to a setup or connect menu and then selecting the options to discover Bluetooth devices.

Before you start the process, make sure the Aris21 is fully charged and the charging cable is disconnected from it and while the
Aris21 is powered off, press and hold S1 for 10 seconds: red and green LEDs flashing alternately will indicate that the headset is in pairing mode.

Then follow the operating instructions for your Bluetooth mobile phone to start the pairing process. Bluetooth may take several seconds to establish a connection.

Your phone's display should indicate that it has found the “ANYCOM ARIS-21” headset and asks if you want to pair it. You should confirm this. The phone's display would prompt you for a passkey or PIN. Enter a sequence of “0000”.

The headset LED will flash green every 3 seconds, indicating successful pairing. Usually the phone will also ask whether
you want to change the headset's name. It is recommended to approve the ANYCOM ARIS-21 name and not change it.

If pairing does not occur as expected: Turn the headset and the phone off and wait for 10 seconds. Turn the headset and phone on again and repeat all steps from beginning. Pairing does authorize the devices like mobile phones and headsets with each other and only needs to be performed once.

After successfully pairing the ARIS-21 and the mobile phone, you may need to establish a Bluetooth link between them according
to the operation manual of your mobile phone. To establish the link, press S1 shortly. Use Nokia 6130i as an example, the mobile
phone will show „Do you accept ARIS-21 request for connection?” Select YES to establish the link. You are ready to make and
answer calls on the Headset. For other phones, please follow the operation manual to establish the link.

Aug 30, 2009 | Anycom Aris21 Bluetooth Headset Wireless...

2 Answers

Connecting problem


Try downloading the driver for the other phone your computer may not be able to detect it

May 14, 2009 | Samsung WEP500 Wireless Headset

7 Answers

Baixing TV200 Mobile USB not connected to PC


I Have the same from, my phone baixing tv200 cannot connect to my pc help me with drivers, plz.

Aug 26, 2008 | Siemens M56 Earbud Hands Free Headset

2 Answers

Cant connect logitech bluetooth to phone,


the logitech head piece buttons must not be working, seems to charge ok but can't get to flash blue?

Aug 07, 2008 | Logitech Mobile Freedom Wireless Headset

2 Answers

How to use Jabra BT5010 with 2 mobile phones


Be careful of the earhook Jabra does not offer a replacement in the BT5010

Dec 07, 2007 | Jabra BT350 Bluetooth Headset Headset

1 Answer

Transmission Failed


first check your mobile for viruses some viruses in ur flash memory (memory card) does not allow u to explore your flash memory so sacn it with a good updated antivirus system when you connect your mobile to ur PC about some tools i can define some great sites http://dwalx.motofan.ru/links.php u can get skin manager and the best is "motomidman" . when u connect ur mobile to pc and start motomidman it shows files and applicationbs like games that are on ur mobile and helps u to rename or delet or move ur applications from memory card to phone memory etc LOGIN TO THE SITE(MAKE UR USER OWN USER ID) http://developer.motorola.com/docstools/othertools/Media_Manager1.8/MM18win.zip/?login=1 to get more good tools

Jun 03, 2007 | Motorola Mobility RAZR V3i SLVR L7 L8 OEM...

Not finding what you are looking for?
LG BLUETOOTH? HFB-300 NOISE CANCELING SPEAKERPHONE SGBF0000105 Wireless Headset Logo

403 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Headsets Experts

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Mike Neath
Mike Neath

Level 3 Expert

315 Answers

Are you a LG Headset Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...