Question about Casio Parts Cash Register PC Desktop

1 Answer

Flexion1: Casio Cash Register TE-2400

Flexion1, thanks for your reply again. I will definately get the dealers manual first. Meanwhile, will you please tell me what is the difference between "flat PLU" and "PLU"
In relation to the linking of the flat PLU buttons and departments you said: ""Ok. it looks like you have a dept or item assigned in place of your PLU button. You just need to replace it with the original and then you can try linking the depts again..."".

I followed the steps above and retrieved the PLU button however which button should i use now to access departments 1-10 (as they were previously located in buttons flat PLU 7&14 etc). Hope to hear from you soon. Thank you.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 737 Answers

You don't need to use the PLU button when operating in REG mode. The PLU button works like a flat PLU button except it allows code entry, so if you press flat PLU button 27, it is the same as typing 27 and pressing PLU. The PLU button is used to access the PLUs that aren't on the keyboard as flat PLUs. Since the machine has a lot more than the approx 70 flat PLUs on the keyboard, you would use codes and the PLU button to look up the others. The reason you needed to put the PLU button back was to allow us to use it in program mode where it is used to call up a PLU for editing (in this case to change dept link). The departments do not need to be on the keyboard. they are really just placeholders in the machine that total up the linked PLUs so you will only see them on your daily report when it has totalled at the end of the day. Try linking a PLU to a department as I showed you before. Then use that PLU in REG mode. Then do a daily report and it should show a sale in the department you linked the PLU to. I know it is confusing, but just link your PLUs at this stage and then you will start to see it happen as you use the machine and take reports.

Posted on Jul 17, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to program discount on Casio TE-2400 cash register


No need to program it. It is enabled by default. For a percentage discount, just type the percentage eg 10 then press %- button. For amount discount, type the dollar amount eg 2000 (no decimal) then press - button.

Dec 20, 2015 | Casio Parts Cash Register PC Desktop

1 Answer

Casio te 2400 cash tender will not work, pre


Try programming 8 zero's into the cash key in program 3 and program 1.

Aug 19, 2013 | Casio TE-2400 Cash Register

1 Answer

How to enter multiple items on a casio te-2400 cash register?


I think you are referring to multiples of one item.You can use the multiplication button:Type the quantity first then press X/DATE TIME button then press the item name.
---------------------------
For those of you asking for a programming manual for a Casio TE-2400 cash register, one of our users has it here:
http://the-checkout-tech.com/manuals/cashregisters/Casio_TE-2200_and_TE-2400_dealers_manual.html

Feb 07, 2013 | Casio Parts Cash Register PC Desktop

1 Answer

I get ERROR 037 on TE 2400


A HALO has been programmed by someone to stop larger amounts from being used. Does it happen on certain products or is it only occurring when you press a payment key?

--------------------------------

If anyone is having trouble with programming a Casio TE-2400 cash register, the dealer manual is here:
http://the-checkout-tech.com/manuals/cashregisters/Casio_TE-2200_and_TE-2400_dealers_manual.html

Sep 17, 2012 | Casio Parts Cash Register PC Desktop

1 Answer

I am trying to formatt the CF card in the Casio TE2400, and have formatted it twice, but with no sucess.... I am formatting through my laptop. Any suggestions? It will let me run an X but not a Z. Thanks!


I would recommend formatting it in the cash register instead. It may not format to the same file system in the PC.
-------------------------------------------------------------------------------------------
If anyone needs a Casio TE-2400 cash register manual, c-tech collective has them here:
Dealer programming manual: http://the-checkout-tech.com/manuals/cashregisters/Casio_TE-2200_and_TE-2400_dealers_manual.html
User manual: http://the-checkout-tech.com/manuals/cashregisters/Casio_TE-2400_users_manual.html
Service (repair) manual: http://the-checkout-tech.com/manuals/cashregisters/Casio_TE-2200_and_TE-2400_service_manual.html

Jan 05, 2011 | Casio Parts Cash Register PC Desktop

1 Answer

Flexion1: Casio Cash Register TE-2400 buttons


These three things are all non standard for cash registers and will require codes that I don't have. they can probably be achieved but it will require the machine setting tables from the manual to set the options. My notes are incomplete in this area. I can tell you what to look for if you are able to obtain the dealer manual

Jul 19, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

Casio te-2400 cash register- making transactions


Try this: Turn key to program mode 0 CASH SUBTOTAL 3 SUBTOTAL 0 CASH SUBTOTAL
This should remove the preset amount from the CASH button. Now it should work normally when finishing the sale.
Now turn back to REG mode when entering the price, DO NOT use a decimal, so type 2000 for 20 dollars. Now press a PLU (item) button. SUBTOTAL Type the amount received (NO DECIMAL, so 5000 for 50 dollars) Press CASH Change should be displayed, and drawer open
---------------------------------------------------------------------------------------
Looking for a manual for a Casio TE-2200, TE-2400 cash register? Go here:
http://the-checkout-tech.com/manuals/cashregisters/Casio4.php

Jul 10, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

Casio TE-2400 sales transactions


Try this: Turn key to program mode 0 CASH SUBTOTAL 3 SUBTOTAL 0 CASH SUBTOTAL
This should remove the preset amount from the CASH button. Now it should work normally when finishing the sale.
Now turn back to REG mode when entering the price, DO NOT use a decimal, so type 2000 for 20 dollars. Now press a PLU (item) button. SUBTOTAL Type the amount received (NO DECIMAL, so 5000 for 50 dollars) Press CASH Change should be displayed, and drawer open
---------------------------------------------------------------------------------------
If anyone needs a manual for a Casio TE-2400 cash register, go here:
http://the-checkout-tech.com/manuals/cashregisters/Casio4.php

Jul 10, 2010 | Casio Parts Cash Register PC Desktop

Not finding what you are looking for?
Casio Parts Cash Register PC Desktop Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Retail Supplies Experts

Electroboy
Electroboy

Level 3 Expert

1802 Answers

jackcity
jackcity

Level 1 Expert

34 Answers

tomferryman

Level 1 Expert

43 Answers

Are you a Casio Retail Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...