Question about Pioneer PureVision PDP-424MV 42 in. Plasma HDTV

1 Answer

I have a pioneer pure vision plasma tv pdp 435pu.when I turn the tv on nothing happens except the power and standby lights flash back and forth.whats wrong how do I fix.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,961 Answers

That is a very technical problem and requires a technical knowledge to fix the problem let me show some DIY steps to help you fix your tv.First open the back cover of your tv examine the power supply section.to determine the power supply board ,it is where the power cord is connected.using a voltage tester,plug in the tv and measure the output voltage (beware of high voltage do not touch them)make sure there is a 5 volts DC going to the main cpu board,12-24 volts to the lamps and 12v to the audio section.if one of this voltage is missing then your tv will not work.you can replace the power supply or repair them.to repair the power supply replace the regulator and leak bulging capacitors also check for open resistors..you can order the whole power supply here. thanx and good luck pls rate my help!

Posted on Jul 17, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pioneer plasma pdp-435pu will not power up


You think it will be defect?
Or just not plugged in correct? can you check if there is really power on the power mains) cable?
Do you hear a click when you use the power button on the front left?
does any light come on?
When the standby light is on, and you can't switch it on with the remote, can you check the remote is still working. for that, hold it in front of a digital camera. Not an iPhone, because that has a IR filter and you won't see any light when pressing a button on the remote.
Just some questions, to keep you busy, checking the TV.
Still no response, let me know.

Feb 02, 2015 | Pioneer Televison & Video

1 Answer

I have a pioneer plasma display pdp-435pu and power cabel but there is no connection wier for cabel connection


This model, according to what I have found from Pioneer, does not contain a TV Tuner. It is a multimedia Television/Monitor.

Oct 11, 2011 | Pioneer PDP-4350HD 43 in. Plasma...

1 Answer

Red LED lights


power supply shot ... sometimes x board or y board

Oct 02, 2009 | Pioneer PureVision PDP-5030HD 50 in....

2 Answers

Loud pop and tv went off...


Here is a solution from the Pioneer web site:

http://www.pioneerelectronics.com/PUSA/Support/Important%3A+Updated+Information+Regarding+Free+Power+Supply+Replacement+for+Certain+Pioneer+Plasmas
Important: Updated Information Regarding Free Power Supply Replacement for Certain Pioneer Plasmas Pioneer is continuing to offer a free, in-home/office power supply replacement for certain of its second and third generation plasma models listed below for customers who experience a problem with the original power supply. If a model is not listed below, no power supply replacement is needed and no further action needs to be taken.
If you own or use a plasma listed below, please call our toll free hotline at 1-800-421-1404 to arrange a time to have your plasma's power supply upgraded at your residence or office at no charge.
Plasma Models (15 listed):
  • PDP-505HD
  • PDP-503PU
  • PDP-5030HD
  • PDP-5031HD
  • PDP-433PU
  • PDP-4300
  • PDP-4310
  • PDP-4330HD
  • PRO-800HD
  • PRO-800HDI
  • PRO-1000HD
  • PRO-1000HDI
  • PDP-433CMX
  • PDP-502MX
  • PDP-503CMX
The issue with the power supply in the plasmas listed above does not pose any health or safety risk. Pioneer has received reports that the power supply in the affected models may fail. In some cases, a loud popping sound can be heard when a power supply fails. After the power supply fails, the plasma is no longer operable.

Anyone with questions can call Pioneer's toll free hotline at 800-421-1404.
We apologize for any inconvenience.

Aug 09, 2008 | Pioneer PureVision Pro-800HD 43 in. Plasma...

2 Answers

Pioneer pdp 503


Hi, my PDP 50XE just cut out, when powered back on the screen powers down and the standby light flashes twice followed by a 5 sec gap.  Anyone got any thoughts? Thanks

Jun 28, 2008 | Pioneer PureVision PDP-5030HD 50 in....

Not finding what you are looking for?

Open Questions:

See all Pioneer PureVision PDP-424MV 42 in. Plasma HDTV Questions

Pioneer PureVision PDP-424MV 42 in. Plasma HDTV Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75169 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2334 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...