Question about Motherboards

2 Answers

Boot failure my computer is not booting..... and i m alo not able to hear the beep whenever my comp boots motherboard :asus P5GZ-MX processer :intel p4 ht graphic c : asus en7900 /16x 512mb

Posted by on

  • Anonymous Jan 29, 2009

    TAAAAAAAAAAAAAAAANCS

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 652 Answers

Samuel,
if you don't here ok beep or any error beep:

  1. First check out speaker is connected properly to motherboard.
  2. Remove all component from motherboard like HDD,FDD, RAM etc..
  3. Just put only processor to your board and power-up
  4. There must be a long beep for missing RAM, if not means you have problem in Motherboard or CPU. Try out another board and another CPU to find out which one is faulty.
  5. If you got missing RAM beep, then power-off and add RAM. Then power-up there must be ok beep (only one beep) or missing RAM beep. If missing RAM beep, then your RAM might be faulty try to clean the connection point with pencil earaser and try out again. If no success then try with another RAM.

I think this will help you.
Please post your feed-back. Or ask me if any question.....
Gud luck
Iqbal

Posted on Apr 21, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check and be sure the power supply is set at the correct voltage. Ours was set for 230V and as soon as we set it for 110V it worked perfectly.

Posted on Feb 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant get display in my asus p5gz-mx motherboard . monitor is ok. pc is on but no display.........


If you are using a flat screen monitor with multiple inputs be sure that the monitor setup is selected to VGA. If that is okay try repeatedly hitting the keyboard key for entry to the BIOS Setup when you reboot. If nothing appears try installing a video card. Check your motherboard over carefully to see if anything is loose or not installed properly like the memory or any added cards. Did the processor come installed or did you install it? Is it a supported dual core Intel processor? Do you get any beeps when you boot up?

Sep 18, 2011 | ASUS P5GZ-MX Motherboard

1 Answer

Using ASUS P5GZ-MX motherboard, running Win Vista. It's supposed to beep once on power up but has stopped. Previous to this, the PC started trying to boot over and over by giving a beep every 10...


* beeping is all about processor,try to clean the surface and check the heatsink if still have a paste on it or change the processor for trial and check if the problem is still they same.

* also check the powers supply,voltage might get open. That's why power failure occur.

good luck..

Jun 14, 2011 | ASUS P5GZ-MX Motherboard

1 Answer

CAN ANYONE PLEASE HELP ME WITH THIS ERROR ON MY PC "INSERT BOOT MEDIA IN SELECTED BOOT DEVICE AND PRESS ANY KEY" my motherboard is "P5GZ-MX X-SERIES" solution I have done so far is...


if you took out the hard drive that was in there, there will be no operating system for the computer to boot from, thats why you are getting that error, if you still have the old hard drive in the system and added the new one to it, you may have to go to the boot section in the bios and change the first boot device to the old hard drive..

Nov 24, 2010 | ASUS P5GZ-MX Motherboard

1 Answer

Asus k8s mx not boots but fan rotates and without


Long beeps are saying 'no RAM'. Any beeps with RAM in place? Remove BIOS battery (silver) for 10 mins to return to factory defaults.

Sep 12, 2009 | VIA Asus K8V-MX K8M800 Chipset 800MHz FSB...

1 Answer

Computer won't boot , constant PWR problem (


i am also using same motherboard dg31pr intel but it does not reboot .......
because this is the problem with you monitor , just you change the monitor and try again .
this is only the solution to solve this as the tecnition said me.

Mar 20, 2009 | ASUS A7V400-MX Motherboard

1 Answer

Asus P5GZ-MX


PUT THE LARGEST MEMORY STICK IN BANK0
PUT THE NEXT LARGEST SECONT OR IN BANK1

USE THE JUMPER SWITCH ON THE MOTHER BOARD RESET EVERYTHING TO ORIGNAL SETTINGS,
BUT BEFORE YOU DO THAT MAKE SURE YOU WRITE DOWN ALL HHD SETTING FIRST.

CHECK THE BOOT SEQUENSE OF DRIVE AND MOTHERBOARD.

ROD

Feb 16, 2009 | ASUS P5GZ-MX Motherboard

2 Answers

Start up of m2n-mx


Do you hear any beeping when it boots up also the Asus board has a boot up software that checks the motherboard and its components. Let me know what it does or says.

Nov 13, 2008 | ASUS M2N-MX Motherboard

1 Answer

Won't boot


usually long beep is RAM

Apr 01, 2008 | ASUS P4S800-MX Motherboard

Not finding what you are looking for?
Motherboards Logo

Related Topics:

924 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Are you a Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...