Panasonic Model TC - 32LX60 can't switch to 1080i again manual doesn't tell me

I think this is what your referring to...https://www.ebay.com/itm/Panasonic-TC-32LX60-KEY-CONTROLLER/322847922245?hash=item4b2b3c5845:g:jyUAAOSwHYpZ8WQu

Power supply needs servicing.......

[email protected]

This is a convergance board issue. The caps on the board may have to be replaced.

Really sorry abou that. Here's the transcript.
http://www.fixya.com/support/c36637
I have been posting responses all the way through. But you were not able to see them, possibly due to some kind of bug

Go to the main setup screen and check your defaults. You might have it set to go to a certain input after a set amount of time.

switch the tv from ant to cable setting (in tv menu!)

sounds like a hardware failure, let me know which model # it is and i will run through service manual.

hello it sounds like a main board issue but try this number and explain exactly ur issues to them they may say they only give info on parts but trust me just keep working ur way up and ull get some answers 800-833-9626 pannys parts and service their service manuals are horrible and not very much info that is really valuable is included in their service manuals another way to make money imagine that.


c

ill keep researching ur problem let me know if u get anywhere

This can be the power supply, or some other boards that are also damaged.

I would take the set in for an estimate to know if it is worth servicing or not.

Jerry G

I work for another site that sells service manuals and provides free tech support, and there is nothing in the manual about error codes. The power supplies would need to be troubleshooted. The manual is anew one but if you would like a copy send them an email and they will upload it to the website for you to purchase, they email all manuals that one was scheduled to be loaded to the site this weekend but they will upload it earky if youd like it. Heres the link.
http://servicemanuals.vstore.ca/