Question about Cosco 2 in 1 10-185-WHO Crib

3 Answers

Missing parts I have a cosco 2 in 1 bed, and as we are trying to convert this from the crib to the toddler/daybed we went to put the front rail on it so my daughter cant fall out and we are missing the 4 little white plastic pieces that rail to the frame. Would you know where or how I could get those pieces?

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

You should be able to take those pieces out of the bottom ends of the crib rail bother than that I'm not sure I have been looking for the plastic pieces for the top of the rail that you squeeze together to lower the side and I called the company and they said they don't carry any parts for this crib anymore. I wish we could all get these cribs together and switch pieces that we need to make at least some of these cribs work its pretty bad. Oh well I hope this helps you.

Posted on Sep 21, 2009

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Contributor
  • 164 Answers

I got the pics you sent and last night I had taken pics of the parts I have. And i am so sorry but they are not the same...However I am searching for them and I will not stop until I find them. I feel bad about getting your hopes up and then discovering that they are not the same. Again I am so sorry. This is what the ones I have look like..

missing parts - c0116de.jpg

Posted on Sep 14, 2009

  • Kristy Mahar Sep 14, 2009

    Im sorry I thought this question belonged to someone else.

    However, I may have the solution you need.

    You can get replacement parts for cosco cribs as followed:





    How do I order additional parts for my crib?
    Additional parts are available through the Consumer Relations Department. Please have your model number and manufacturing date available prior to contacting us. To order, e-mail the Consumer Relations Department at consumer@djgusa.com, fax us at 1-800-207-8182, or write to the following address:
    Dorel Juvenile Group
    Consumer Relations Department
    P.O. Box 2609
    Columbus, IN 47202-2609

    You may also contact the Consumer Relations Department at 1-800-544-1108 to speak to a Consumer Relations Representative. Hours of operation are Monday - Thursday 7:00 AM to 6:00 PM EST and 7:00 AM to 4:30 PM EST on Friday.

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Call 800-647-3876 with the model number and date of manufacture.

Posted on Apr 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a vickie crib .I want to convert to toddler bed. If I take the front rail off there is'nt anything to hold the bed up in the front. It unscewss from the side. Help! Bed was purchaced 9/2008 ...


Is this a 4-in1 convertible crib? The Toddler bed will need the bottom railing and a half rail to convert from a crib to a toddler bed. The half rail can also be removed to make the 4th conversion to a toddler bed with out railing. But to convert this specific bed you DO have to add the bottom rail that came with the bed at purchase.

Mar 10, 2011 | Sorelle Vicki

1 Answer

I lost the instructions and my son is ready to be in a toddler bed. I was wondering how do i covert the Graco - Lauren 4-in-1 Convertible Fixed Side Classic Crib into the toddler bed? and also do i need to...


You just take off the rail and Tada! it's a Toddler bed.
Then you can change from elmo sheets to Pokemon sheets and Tada! it's a Day/Bed. I don't know how they get away with advertising it as a 4-in-1 since there is no material difference between the daybed and the toddler bed.

Aug 15, 2010 | Graco Lauren Crib

1 Answer

How to convert from crib to toddler bed


It converts from a crib to a daybed, by taking the front sliding rail completely off. The rail will slide up out of the groove.

Hope this helps.

May 15, 2010 | Storkcraft Baby Aspen Stages Crib

1 Answer

Jardine Model # DA715BC toddler bed assembly instructions


I have the same crib for my daughter when I went to change it I called the company bc I couldn't find the toddler rails that matched the crib.. They said that it doesn't convert into a toddler bed, just a day bed, and a full-sized bed.. I said NO it's a four in one.. their reply.." yes, a crib, a day bed, a full size bed with foot board, and a full sized without the foot board." I laughed and told them what a joke that was.. So my husband and I took the front off the bed to make it the daybed and went to walmart and bought a toddler bar for like 20 dollars in the baby department. She loves it and it worked for us without having to spend another 150 dollars for a cheap toddler bed.. good luck.. btw this crib has been recalled.. you might want to check it out

Mar 05, 2009 | Baby Gear

2 Answers

Lost manual for crib to toddler bed Model 8760H


Hi everyone,

I just went on to the Storkcraft website for Canada and found some installation instructions. There are instructions for the initial set up, for converting to a toddler bed, and converting to a daybed. Here's the link . On the right side there are 3 links for Assembly instructions. The first is the initial assembly, the second shows the toddler bed and daybed assembly, and the third is a complete installation manual. Hope that helps!

Erin

Nov 21, 2008 | Baby Gear

1 Answer

Transfer


All you have to do is remove the plastic slider rails on the top and bottom of the front rail and take off the rail. This bed still has 3 rails like a daybed when it is changed into a toddler bed.

Jun 04, 2008 | Cosco 2-in-1 Sleigh 10121 Crib

1 Answer

Convert crib to toddler bed


I finally found my instructions!! It's actually really easy to convert to a toddler bed:
Step one: Take out four screws (two on each side) of the front railing and top bar. They are the screws holding the front railing and the top bar to the side of the crib and the dresser. 
Step two: Lower the mattress to the lowest setting. 
Step three: Place the toddler bed railing in place. It can go either way depending on which side of the crib your toddler sleeps. We put the taller part of the toddler railing closest to the dresser because that is where our son's head usually is. 
Step four: You'll need 4 1.5 inch hexagonal screws to screw in the toddler railing. After 2.5 years, I could only find two of them, so I used two 1.5 inch regular screws that came with the crib. On the taller part of the toddler railing -- the screws go into the 1st and the fifth holes. On the shorter side of the railing, the screws go into the 3rd and the 5th holes. 
That's it.. You've now got a toddler bed!

Apr 26, 2008 | JCPenney All-in-One Nursery Crib

4 Answers

Convert to toddler bed


They do have answers on their website, you may want to check your printed or online crib instructions to remind yourself how you put the crib together, too.

I found the answers here:
http://www.pali-design.com/index.php?path=customer_services&template=faq&section=customer_services&subsection=faq&page=faq

i've pasted them below. You can make it a toddler bed without a side rail just by removing the movable side of your crib, and you can install the side rail instead of the movable side if you want it to look a little more finished and help keep your child from rolling out of the bed.

FAQ

How to convert a crib into a toddler bed
To convert a crib into a toddler bed you must loosen the two front gold bolts left and right side of the crib and remove the dropside (the front gate that goes up and down). After removing the dropside be very careful that you tighten back your two gold bolts.

How to install the streight rail (toddler rail)
To install a streight (toddler) rail loosen the two front gold bolts left and right side of the crib and remove the dropside, once you have removed the dropside replace with the streight rail. Always be very careful and make sure you tighten back your two gold bolts in the front.

Oct 14, 2007 | Pali Sabrina Crib

4 Answers

Converting Simmons Crib 'n' More to a full size bed


You can call Simmons Customer support at 1-800-218-2741 and order the rails - they are $79.99 which includes shipping. I just did so yesterday. I had the same problem. I purchased this crib 5 years ago and now need the bed rails to convert to a full bed. You cal also email them at customerservice@sjfdec.com. Shipping takes about 2-3 weeks.

Sep 20, 2007 | Simmons Mattress Crib 'n More

Not finding what you are looking for?
Cosco 2 in 1 10-185-WHO Crib Logo

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cosco Baby Gear Experts

Iron
Iron

Level 3 Expert

3018 Answers

Jennifer Rock
Jennifer Rock

Level 2 Expert

105 Answers

noel
noel

Level 3 Expert

4740 Answers

Are you a Cosco Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...