Question about Sony Cyber-Shot DSC-S40 Digital Camera

1 Answer

When i turn on my camera the lens trys to come out but then it gets stuck and goes back in; the screen says "turn the power off and on again" but when i do the same thing keeps happening over and over. The camera has one big rechargable battery so i can't just replace it. I've tried doing the reset, and I've tried tapping around the lens ad hitting the sides or bottom of the camera but nothing has worked.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 178 Answers

Here is a very reasonably priced quote for repair; https://www.teleplancamerarepair.com/quote/cart.asp?iProbID=5&mo=358
note; whatever you do, do not force the lens back in or pull it out. the alignment is off due to perhaps one of the barrels, or sliders, or even the internal rings around the lens. if anything "fell out" of the lens while you were tapping it around, be sure to send it in carefully wrapped for the repair.

Posted on Jul 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to an Expert (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When the camera is switched on the lens goes in and out twice and then the message that appears on the screen is 'turn the power off and on again'


Hi,


Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.

Performing a manual power reset

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.

To reset the Camera back to factory default, select the INITIALIZE Option from the SET UP1 Menu of the Camera to OK.This will set the user defined settings back to factory default. The images and videos will not get deleted.


If the issue persists, service may be required.


Thanks for contacting FixYa

May 09, 2011 | Sony Cyber-shot DSC-W50 Digital Camera

1 Answer

When I turn it on the lens goes in and out three times and then says turn the power off and on again and it does the same thing


Hi,


Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.

Performing a manual power reset

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.

To reset the Camera back to factory default, select the INITIALIZE Option from the SET UP1 Menu of the Camera to OK.This will set the user defined settings back to factory default. The images and videos will not get deleted.


If the issue persists, service may be required.


Thanks for contacting FixYa.

Feb 24, 2011 | Sony Cyber-shot DSC-W55 Digital Camera

1 Answer

When I switch on the lens goes in and out a few times but no viewing screen. It asks to be switched off and then on. I can view stored pics but it won't allow me to take any?


Hi,


Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.

Performing a manual power reset

· Turn off the camera.

· Remove the battery pack.

· Press and hold the power button for 30 seconds.

· Allow the camera to remain without power for 60 seconds.

· Reinsert the battery pack.

· Turn on the camera.

To reset the Camera back to factory default, select the INITIALIZE Option from the SET UP1 Menu of the Camera to OK.This will set the user defined settings back to factory default. The images and videos will not get deleted.


If the issue persists, service may be required.


Thanks,

KenSolutions

FixYa

Oct 21, 2010 | Sony Cyber-shot DSC-W55 Digital Camera

1 Answer

When i turn on my camera the lens gets stuck coming out


Normal batteries it's not working for me!
After i replace standard alkalines with rechargeable NiMH batteries Sony and Varta 2700 Ni-MH it's was working!
My camera it's turn on every time! fb9dba0.jpg

Jul 16, 2010 | Sony Cyber-Shot DSC-S40 Digital Camera

1 Answer

When i turn the camera on, the lens goes in and out, and then there is a message on the camera saying, "Turn the power off and on again". I do this and I still get the same error message.


Hi,


Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.

Performing a manual power reset

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.

To reset the Camera back to factory default, select the INITIALIZE Option from the Main Settings 1 Menu of the Camera to OK. This will set the user defined settings back to factory default. The images and videos will not get deleted.


If the issue persists, service may be required.


Thanks for contacting FixYa.

May 11, 2010 | Sony Cyber-shot DSC-W170 Digital Camera

2 Answers

Turn the power off and on again message


Hi,


Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.

Performing a manual power reset

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.

To reset the Camera back to factory default, select the INITIALIZE Option from the Main Settigs 1 Menu of the Camera to OK.This will set the user defined settings back to factory default. The images and videos will not get deleted.


If the issue persists, service may be required.


Thanks for contacting FixYa

Feb 15, 2010 | Sony Cyber-shot DSC-W170 Digital Camera

1 Answer

Cannon G7 need help


Hi
Had the same problem a few months ago.There was a high pitchedwhisltle and I think the screen said "lens fault.turn off camera" or something similar.Bought a G9 to replace as the 7 was out of guarantee but sent the 9 back to the e-bay reseller as it was obviously secondhand with grit around the lens ring and the viewfinder.Ebay never again!.So 3 months ago ago I tried the G7 again with a fresh charged battery before I consigned the camera to the loft.I noticed that each time i switched on the whistle and message was there but the lens extended slightly further each timeso I kept rebooting until the lens was fully extended.Turned the camera off and on again and everything was back to normal.It seems that this may be Canons protocol when a camera goes back.Its been absolutely fine until today.It wont boot up at all.I have tried 2 fresh charged batteries and its dead.Any ideas anyone?

Nov 06, 2008 | Canon PowerShot G7 Digital Camera

1 Answer

Turn camera off then on again?


I posted and looked around more online- I found this, did it and it worked! I just held camera with lens upright and used my left thumb and applied pressure when turning off with right thumb.

"I have dsc-w70 with lens stuck out . When you turn it on , you will see a message turn the power off . I've just fixed this morning without any tool and it took only a second . When i turn the power off with my left thumb , i used my right hand to squeeze the lens with little push it in , it will be back to the right position it should be . My camera is working great now like before . Do not affraid , hope everyone can do it . Good luck ."

Feb 22, 2008 | Sony Cyber-shot DSC-W70 Digital Camera

2 Answers

Sony DSC-S90


Hello, something is wrong with the lens assembly. The part number for the lens: 178821511. If you need more info please advice.

Apr 18, 2007 | Sony Cyber-Shot DSC-S90 Digital Camera

Not finding what you are looking for?
Sony Cyber-Shot DSC-S40 Digital Camera Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Cameras Experts

kakima

Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

james laughton
james laughton

Level 3 Expert

2189 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...