Question about Emerson EWL20D6 Television

1 Answer

Could not program dish network remote to combo emerson tv

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 123 Answers

We would be happy to help. We currently do not have anycodes specifically for your Emerson TV/DVD combo unit, but we would recommend performing apower scan. If there is a code that is compatible with your TV, the power scanwill find it. Power scan instructions:

Step 1:
Press and hold the TV mode button until all mode button back lights illuminate,then release.

Step 2:
Press and release the Power button.

Step 3:
Press the Up button once a second while pointing the remote at the TV. If the code for the TV comes up, the TV will turnoff.

Step 4:
Press the pound (#) button. If the code entered is valid for the remote, themode light flashes three times.

After doing the power scan please remember to put the remote back into SAT mode.Thanks so much for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Posted on Mar 14, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot enter correct code for dish network remote control


Try these steps:

Power Scan
1.) Hold down the clear "TV" button on the remote for four seconds, then press 500 pound ( #)
2.) Hold down the clear "TV" button on the remote for four seconds, press the big power button once.
3.) Press the channel up button once per second until the TV turns off then press pound (#).
When you finish several functions to make sure the remote works. Hope this helps!!

Daniel Busa
DISH Network Customer Service

Feb 26, 2011 | Emerson EWC27T3 27 in. TV/VCR/DVD Combo

1 Answer

I need to program my dishnetwork remote model 6.0 ir/uhf pro to the tv. Also, I have hooked up a gamecube system to it, but cannot get the game system to come up on the tv screen. I am hoping the remote...


We would be happy to help with those two issues. First let's address your DISH Network remote to your Emerson TV. To check that the code works try severalfunctions on the remote to make sure it's the best code to use with your TV. Rememberthat some codes may not be compatible with your equipment. If this is the case,try the other codes listed for that device until you find one that iscompatible with your equipment. Remember to put your remote back into SAT mode once you're done.

Once you have your DISH Network remote programmed to your TV getting the game system to come up on the TV should be a matter of getting your TV on the input you have it connected to. This can be done by pressing the "TV/Video" or "Input" button on the DISH remote when it is in TV mode. If you are still having trouble with getting the game system to come up on your TV, call the Emerson Customer Service Department at: 1-800-256-2487.

We hope that this information gets you up and running. Thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Feb 21, 2011 | Emerson SpongeBob SquarePants TV

1 Answer

I have a vcr dvd combo and i want the code for my dish network remote so i can use one remote please


We would be happy to help you with that. Here is a list ofcodes that should address your DISH Network remote to your Emerson DVD/VCR combo unit: 588, 505, 506, 518, 534, 536.

Press and hold the DVD/VCR button located on the top of the remote until allthe mode buttons at the top of the remote light up, then release. Use thenumber buttons to enter one of the codes for your Emerson DVD/VCR combo unit, thenpress the pound (#) button. If the code entered is valid for the remote, themode light flashes three times. .To check that the code works try several different functions on the remote tomake sure it will properly operate your Emerson component. Keep in mind that somecodes may not be compatible with your equipment. If this is the case, pleasetry the other codes listed for that device until you find one that iscompatible with your equipment. We hope this helps and thank you forbeing a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Jan 20, 2011 | Emerson EWD2203 DVD Player/VCR

1 Answer

I am trying to find the codes for a Dish Network remote ( 6.4 IR/UHF PRO ) to program TV Emerson LC320EM1 and if possible for the Lenoxx Sound Home Theater. Thanks in advance for any help.


Hello, my name is Daniel Busa with DISH Network customer service below, are the codes for your emerson tv and a limk with instructions if the codes don't work try the powerscan method in the link I gave you.
632,516,627,654,720,532,500,526,534,536,541,573,,590,636,642,648,652
http://www.dishnetwork.com/SupportSection/setup-remote

Jan 06, 2011 | DISH Network IR Remote Control

1 Answer

Looking for a code to use on my Dish Network (Universal) remote in order to operate my Emerson Model EWD2202 Combo VCR/DVD player


Hi my nameis Mike Houston of DISH Network and I was going over your post and see whereyou want the codes to program the DISH remote to the Emerson DVD/VCR. We do nothave the three digit codes to enter however we do have what we call a PowerScan and it will allow programming the remote to the Emerson player, I willsend a link to help with these steps. http://www.dishnetwork.com/SupportSection/power-scan-instructions

Oct 31, 2010 | Emerson EWD2202 DVD Player/VCR

1 Answer

Cant program my emerson flay screen tv wiyh dish


Hi tbombertigermy name is Mike Houston of DISH Network and I was going over your post and Isee where your Emerson TV needs to be programmed to your DISH Network remote. Ihave the codes 569, 632, 505, 516 and 004. What you will want to do is holddown the clear TV button for 6 seconds and then press in the three digit codeand the # button. If these keys don't work we do have a step called Power Scanand I will send the link to help with the setup. http://www.dishnetwork.com/SupportSection/power-scan-instructions

Jan 06, 2010 | DISH Network IR Remote Control

1 Answer

Cant find code for dish net remote to control emerson 32lc320emx


wwoodzy

Some TVs will not provide all the features of the TV or won't work with out DISH remotes. I have supplied all the available codes for the Emerson TVs. I hope this helps.

TV codes:
541, 544, 632, 537, 526, 534, 536, 590, 627, 636, 642, 648, 652, 654, 655, 657, 658, 659, 660, 661, 662, 665, 666, 667, 669, 670, 677, 679, 682, 692, 696, 699, 720

Program remote:
http://www.dishnetwork.com/SupportSection/remote-setup

Ray Calo
DISH Network

Dec 12, 2009 | DISH Network IR Remote Control

1 Answer

Cant program dish network remote to my sylvania tv/dvd combo


Not likely will your current remote ever have the capability for your newer model. The code sets are designed into the Dish remote as they were available then and don't 'learn' newer sets.
You might try to find one of the other Funai brand code sets under these names:
Funai, Symphonic, Emerson, Aventura, Durabrand, ESA, Magnavox, INSIGNIA, and Misakai
Even if you do find one that gives you some functions, I doubt you will find one set for both TV and DVD player so you will have to try individual code sets; one for TV, another for DVD.

Jul 12, 2009 | Toshiba MW27F51 27 in. TV/VCR/DVD Combo

2 Answers

Code for trutech


dish network remotes dont work with very many tv/vcr or tv/dvd combo units

Jul 11, 2008 | DISH Network IR Remote Control

3 Answers

Dish network


With the dish remote and do a code search as described in the remote manual and see if you can find it that way. If you go through the entire code search and none of them turn off the VCR/DVD combo, then there is nothing you can do, as those codes in the remote are all stored in the remote and they cannot be programed in. If you do not have a remote manual to set up the remote, to do a code search, simply go to the dishnetwork web site and search for it.

Sep 27, 2006 | Emerson EWD2004

Not finding what you are looking for?
Emerson EWL20D6 Television Logo

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75581 Answers

matt martin
matt martin

Level 3 Expert

1229 Answers

 Grubhead
Grubhead

Level 3 Expert

5487 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...