Question about Computers & Internet

1 Answer

Need to increase pixels on my 1999 compaq mv720 moniter but the slider bar dont move!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Hello bornfree_c60,

This is most likely because your graphics card does not support a higher resolution. The best possible solution for this is to replace the card with a newer one.

Choose a PCI or AGP slot graphics car, depending on the slots available on the motherboard. You can find some decent cards HERE or HERE. Choose one based on your budget and how much memory you need on the card.

Should you have any further questions, please feel free to post them here.

P.S. Before you assign a rating, please make sure that the issue is resolved. If it isn't, please post back as to what you did, and/or any other questions you may have, and I will try to assist you as best I can. Please do not assign an ‘Inappropriate’ or ‘Thanks for trying’ rating if your issue is not resolved after the first response itself, as sometimes a bit of to and fro dialogue may be necessary before we can find a fix or an answer to your query.

If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! or Helpful rating. I would be very grateful for your show of appreciation.

Thank you for using FIXYA!

Cheers!
IrishDruid

Posted on Apr 21, 2008

  • 1 more comment 
  • Swilin Sampson
    Swilin Sampson Apr 23, 2008

    Have you been able to resolve your problem? If you have,
    please close this problem ticket with a Helpful or FixYa! rating. I would be
    very grateful for your gesture of appreciation.





    Should you have any further questions, please feel free to
    post them here.





    Thank you for using FIXYA!





    Cheers!


    IrishDruid


    "Discover
    How to Achieve Your WILDEST DREAMS"...
    Free Download



    FREE SOFTWARE GIVEAWAY


    Windows Utilities

  • Swilin Sampson
    Swilin Sampson May 03, 2008

    Hi,




    Just wanted to inquire if your issue is resolved, or if there is anything
    further I can do to assist you…





    If you find that the solution/answer I provided led you
    to, or resulted in a fix, please take a moment to close the ticket with a FixYa!
    rating under my solution.
    I would be very grateful for your show of appreciation.





    Should you have any further questions, please feel free to
    post them here.





    Thank you for using FIXYA!





    Cheers!


    IrishDruid

  • Swilin Sampson
    Swilin Sampson May 31, 2008

    Hi,




    Just wanted to inquire if your issue is resolved, or if there is anything
    further I can do to assist you…





    P.S. -You can rate this solution with one of
    four votes, if you feel your issue is resolved.






    • "FixYa!"
      - The solution provides great advice on how to solve the problem.
      (Positive Rating)

    • "Helpful"
      - The solution provides useful leads that helps solve the problem.
      (Positive Rating)

    • "Thanks
      for Trying
      " - The solution does not solve the problem but the
      effort is appreciated. (Negative Rating)

    • "Inappropriate"
      - The solution has absolutely nothing to do with the problem.
      (Negative
      Rating)


    If your issue is not still not resolved, do not
    assign a rating just yet. Please post back as to what steps you took, results,
    etc, and I will try to assist you further as best I can.






    Thank you for using FIXYA!





    IrishDruid




×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am having problems adjusting volume


What type of laptop HP , ASUS , COMPAQ , ACER ?..........
Up the Volume on My HP Laptop
Open the "Start" menu and click on the "Control Panel" icon.
Locate and open the icon that deals with sound.
Depending on your version of Windows, it will say either "Sounds and Audio Devices" or "Adjust System Volume."
Adjust the volume under the "Speakers" icon.
To do this, click on the slider bar and move it up on the slider.
If you need to decrease the volume, simply move the slider bar down.
Click on "OK" when finished and close the "Control Panel" window.
Click on the speaker icon in the bottom-right corner of the screen for a faster volume adjustment. Simply move the slider bar up to increase the volume and move it back down to decrease the volume.

Volume on an Acer Laptop
Acer laptops are typically sold with pre-installed Windows operating systems that offer sound-adjustment features for increasing the volume on the laptop's built-in stereo speakers.
These same functions can also be used in tandem with external speakers or headphones to increase the volume, as well as mute all sound on the laptop.
If the computer should output an unusually low volume, fixing the problem may be no more involved than sliding a control switch with the computer mouse. Click once on the speaker icon in the taskbar on the lower-right corner to open a rectangular window with a slide control.
Click and hold the left mouse button on the slide control to drag it upward, increasing the volume to the laptop's maximum setting.
Click the "Mixer" button below the slider control to open another window with volume controls for "Speakers" and "Applications," adjusting each slide control upward to increase the volume.
Be sure the speaker icon below each control is not accidentally muted.
Click once on each speaker icon to remove the red circle with a slash through it, which will restore audio.
Click the Microsoft flag or "Start" button in the lower-left corner if the shortcut speaker icon is missing from the taskbar.
Click "Control Panel" to select "Adjust Sounds" from the Hardware and Sounds category.

Aug 10, 2013 | Computers & Internet

1 Answer

How to increase the resulution of acer x153w in to 1024by768 pixel


eight click on desktop and select the last option of properties a new window will open select the last tab of setting now you can see a bar of resolution move it and increase or decrease your resolution
if the bar shows disable and not working

then put your system driver cd on your cd rom and install the video or graphics driver restart your computer now follow the first step now the bar is enabled and you can move the bar to increase or decrease your resolution

Jul 16, 2011 | Computers & Internet

1 Answer

How do you adjust volume on tomtom one


While riding, tap a corner of the status bar
  1. Horizontal status bar on the left corner where is shows the directional arrows
  2. Vertical status bar: On the top corner, where directional arrow are shown
After you tap the correct corner of the status bar, a volume slider appears at the bottom of screen. Move slider to the right to increase volume, or to the left to decrease volume.

Jan 02, 2010 | Tomtom ONE GPS Receiver

1 Answer

How do you adjust the volume on the reciver


While riding, tap a corner of the status bar
  1. Horizontal status bar on the left corner where is shows the directional arrows
  2. Vertical status bar: On the top corner, where directional arrow are shown
After you tap the correct corner of the status bar, a volume slider appears at the bottom of screen. Move slider to the right to increase volume, or to the left to decrease volume.

Jan 02, 2010 | Tomtom ONE GPS Receiver

1 Answer

While trying to install Canon Camera software, I'm getting a message that says ''screen resolution to execute digital camera solution disk is not sufficient.


Select the "Start" menu in the lower left corner of your computer monitor screen. Select "Control Panel", then double-click on "Display".

Click on the upper "Settings" tab, then move the slider bar to the right, to at least 1024 x 768 pixel. Then hit Apply or OK. This will increase the screen resolution of your computer monitor so that it will be compatible with the Canon software.

Oct 15, 2009 | Canon Cameras

1 Answer

When in gmx,letters are too large .How do I set the display back to normal.


right click on the screen then select properties..while on display properties click settings..under the screen resolution, adjust the slider bar to the right until the pixel is 1024x768..adjusting to the right decreases the pixel and to the left increases the pixel.. under the color quality select highest (32 bit)..click apply then OK..when prompted to keep the settings click OK..

Jul 19, 2009 | Acer Computers & Internet

1 Answer

Resolution problem in Cricket 07


you need to check if your computer monitor supports resolution above 640 X 800 pixels or not, if you have a windows operating system you can check this by right clicking on your desktop ->Properties -> Settings -> Screen Resolution, check here by moving the slider bar what is the maximum video resolution supported by your PC

Also check if your computer meets the minimum requirements required to play EA Cricket 07

Apr 07, 2009 | EA Sports Cricket 07 for Windows

1 Answer

I need to set my display settings to 1024x768 pixels or higher, i dont know how.


Start>Control Panel>Display>Settings
In this window you will see the screen resolution on the left, just move the slider across till it gets to 1024X768 and click OK

Aug 30, 2008 | Computers & Internet

1 Answer

Hey there!my comp. worked fine untill i put in 98se disc to recover minor info.when complete i found that graphics is distorted and pixels are set to low for my screen size but am unanable to move slider...


I would go here http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=20&lc=en&cc=us&dlc=en&product=93358 and download the drivers for windows 98 from compaq and see if it straightens out. sounds like the 98 cd fried your video drivers

Apr 21, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...