Question about Microsoft Xbox 360 Console

2 Answers

Tony Hawk ride board is not syncing with the console to connect and play the game. It the xbox connect button flashes and then when we press and hold the sync button, nothing happens.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Try to change your batteries even if they are full.

First press the Xbox Guide Button (located on the side of the skateboard) until it lights up and starts blinking. Then press the Sync button on the Xbox console so that the front lights start blinking. Now push the sync button on the skateboard (little button that is to the left of the Back button) until it starts flashing. Both the board lights and the console lights will blink twice when they are synced.

Posted on Jul 30, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 177 Answers

Hold the connect button in for 3 seconds its under the memory card slots

Posted on Jul 16, 2010

  • Michael howard
    Michael howard Jul 31, 2010

    replace battery's maybe

  • Henry Wilkie Jr. Feb 07, 2011

    the new Xbox dont have that button cant get mine to work same problem, i have the Halo Reach limited addition Xbox

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set up tony hawk shred board. on the tv it says to connect the board, and the light on the board keeps blinking green


You need to connect the board to the XBOX before you can calibrate...press the Connect button on the main console (on my XBOX 360S it is directly to the left of port 1 for the game controller), then press and hold the tiny button far left on the board controller. That's as far as I got, it won't calibrate to save my life!

Dec 26, 2010 | Activision Tony Hawk: Shred

1 Answer

Tony hawk ride for wii-the board won't connect.


IT TOOK 1.5 HOURS TO SYNC UP AND CALIBRATE A NEW TONY HAWK RIDE SKATE BOARD WITH A Wii.
THE ON-LINE DIRECTIONS AND TROUBLESHOOTING = SUX!.

PLEASE FOLLOW THESE DIRECTIONS IF YOUR HAVING THE SAME ISSUE:
1) Remove skateboard battery's for 1 minute
2) Reinstall 4 new/fully charged AA Battery's in the Tony Hawk RIDE Skateboard.
3) Plug the Tony Hawk Wireless USB Dongle into the "upper" WII USB Port,
Turn on the WII,
Insert the Tony Hawk Ride game disk
Keep pressing A on the WII Controller till you get to the Error Screen saying:
*Unable to SYNC up the skateboard with the WII*
4) Make sure the WII and the plugged in wireless USB Dongle are laying on the floor in front of the wireless skateboard "sideways" with the wireless dongle towards the right side of the WII.
5) The directions state to 1st press the wireless USB dongle reset/Sync button, then the so called Start button on the board, which did not work 100 different times.
6) Instead (on the side of the board) all 4 of the blue LED lights were on. Now press and hold the button which is the Start/Home/blue little house/C- looking Button on the side of the board for 5 seconds. The Blue LED lights should now all be off!
7) Now press the WII Wireless USB Dongle reset/Sync button.
8) After the Dongle sync

Oct 26, 2010 | Nintendo Tony Hawk Ride for Wii

1 Answer

Skateboard for Tony Hawk Ride for the Wii won't calibrate just bought the game can't get pass the first test not sure why. Nothing is around the board TOOK everything out of the living room besides the...


IT TOOK 1.5 HOURS TO SYNC UP AND CALIBRATE A NEW TONY HAWK RIDE SKATE BOARD WITH A Wii.
THE ON-LINE DIRECTIONS AND TROUBLESHOOTING = SUX!.

PLEASE FOLLOW THESE DIRECTIONS IF YOUR HAVING THE SAME ISSUE:
1) Remove skateboard battery's for 1 minute
2) Reinstall 4 new/fully charged AA Battery's in the Tony Hawk RIDE Skateboard.
3) Plug the Tony Hawk Wireless USB Dongle into the "upper" WII USB Port,
Turn on the WII,
Insert the Tony Hawk Ride game disk
Keep pressing A on the WII Controller till you get to the Error Screen saying:
*Unable to SYNC up the skateboard with the WII*
4) Make sure the WII and the plugged in wireless USB Dongle are laying on the floor in front of the wireless skateboard "sideways" with the wireless dongle towards the right side of the WII.
5) The directions state to 1st press the wireless USB dongle reset/Sync button, then the so called Start button on the board, which did not work 100 different times.
6) Instead (on the side of the board) all 4 of the blue LED lights were on. Now press and hold the button which is the Start/Home/blue little house/C- looking Button on the side of the board for 5 seconds. The Blue LED lights should now all be off!
7) Now press the WII Wireless USB Dongle reset/Sync button.
8) After the Dongle sync

Oct 26, 2010 | Activision Tony Hawk Ride for Nintendo Wii

1 Answer

I want to sync my tony hawk ride board to my wii but it won't I have tried pressing the dongle button then turning on the board but it won't work


Mine did this to but when i put the tony hawk ride board up next to it and pressed the power button on the side of the board and the reset sync button on the dongle it worked. this is what the button looks like on the board. C- a c with a line through it.

Aug 16, 2010 | Nintendo Wii Console

1 Answer

Tony Hawk Ride game connection problems


try holding the connect button under the memory cards for three seconds on the console

Jul 16, 2010 | Microsoft Xbox 360 Console

4 Answers

Tony hawk ride troubleshooting


bought the tony hawk ride and the board won't calibrate with the receiver?

Dec 27, 2009 | Nintendo Wii Console

4 Answers

Can't get tony hawk "ride" board to "connect" with wii console after following instructions


Still dosent work for me.
it just flashes and never shows player one or two.

Dec 25, 2009 | Nintendo Wii Console

2 Answers

Tony hawk the ride board connection


Press the button on the dongle, then press and HOLD the power button on the board until it stays solid. had the same problem hope this works

Dec 25, 2009 | Nintendo Wii Console

Not finding what you are looking for?
Microsoft Xbox 360 Console Logo

2,173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Video Game Consoles & Games Experts

Stormi  Paulk
Stormi Paulk

Level 2 Expert

415 Answers

Stu Morris K

Level 2 Expert

178 Answers

shaun taylor

Level 3 Expert

1527 Answers

Are you a Microsoft Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...