Question about Brother LS-2125 Mechanical Sewing Machine
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: THREADING FOR JUKI MO 357
Put new needles in it.
Following the colors, thread the upper looper first, then the lower looper. Next thread the needles. Always thread in this order.
Posted on Jun 27, 2009
All sergers thread the same way and sergers have to be threaded in a certain order. I made a jingle out of it...
It would be best to have a tweezers handy to help with the thread and threading.
always be sure the lower looper thread goes over the top of the upper looper then out the back. I would be surprised if your thread guides are not color coded.
If you look at the top thread guides or the spools. First from left to right thread the 3rd spool, then the fourth spool. Then you thread the right needle (the second spool) then the left needle (1st spool.
The lower looper can be tricky because you have to thread it from the back of the looper to the front.
Pull the threads out the back from under the foot. Then go ahead and run it slow watching to see if it starts making a chain. It should. If not do it over again.
Posted on Aug 03, 2009
I also am after the manual for the Elna contessa mo-103 and was wondering if you might be able to scan and email it to me? Am going crazy trying to get it threaded and tensioned correctly!!
Posted on Apr 12, 2010
Tips for a great answer:
Jan 24, 2018 | Toyota Sewing Machines
Dec 14, 2016 | Sewing Machines
Sep 24, 2016 | Brother Sewing Machines
Apr 09, 2015 | Sewing Machines
May 07, 2012 | Sewing Machines
Apr 06, 2012 | Sewing Machines
Oct 30, 2011 | Sewing Machines
Jul 13, 2009 | Brother Sewing Machines
110 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: