Question about Pioneer CDJ-1000MK2 Turntable

1 Answer

My CDJ1000 MK2 doesnt play in Vinyl Mode. The Vinyl light is on and if i move the platter manually the audio seem to be ok but it wont play by itself.what cud be the problem? and the solution?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 135 Answers

The problem is almost certainly the "sheet switch" which is a circular plastic "sandwich" of multiple contacts fitted under the platter and when constant pressure is put on it (often when players are stcked on top of each other), it tends to stick together giving the effect you are pressing it when you're not.
The part will cost you about £30.00 + fitting + VAT unless you are confident enough to do it yourself

email me if you would like to order one or discuss sending it for repair. mail@technicsdjuk.com

http://stores.ebay.co.uk/methleykev

Posted on Jul 20, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Crosley CR249 warped table


Sounds like you need a new platter. Has the platter worked OK before or has it always been like this?
I suspect you might have to contact Crosley to see who supplies parts.

Jan 10, 2013 | Crosley CR249TA Turntable

2 Answers

Technics sl dz 1200 no vinyl play


is anybody have solution for this? i have the same prob...

Apr 11, 2012 | Panasonic Technics SL-DZ1200 Turntable

1 Answer

My Pioneer CDJ 800 MK 2 - will not play in the vinyl mode, the cue button is flashing _ if i take it out of vinyl mode it will play fine , do i need to reset it?


Does the unit play in vinyl mode if you turn the platter by hand?. If this the case the commom fault in the "sheet switch" which is under the platter and sensors the pressure when you press the platter.

The "sheet switch" and it is a circular plastic "sandwich" of multiple contacts and when constant pressure is put on it (i.e something is sat on it for a long time), it tends to stick together giving the effect you are pressing it when you're not.
The part will cost you about £30.00 + fitting - unless you are confident enough to do it yourself

email me if you would like to order one. mail@technicsdjuk.com

http://stores.ebay.co.uk/methleykev

May 14, 2010 | Pioneer CDJ-800 Turntable

1 Answer

The center light of my cdj1000 is not working


Mk1 ? Mk2 ? Mk3?

On mk2's zener diode (D1221 - surface mount on JFLB pcb) quite often goes short circuit and blows fuse / circuit protector IC106 - N10 400mA rating
http://www.technicsdjuk.com/

May 10, 2010 | Pioneer CDJ-1000 CD Player

1 Answer

Sound has died on cdj1000


Does absolutely every other function / light / switch etc etc work ok?, If so then the 1st place I'd look would be the output phono connectors and the circuit board they are soldered to, I would be looking for dry joints and cracks where the sockets are mounted

http://www.technicsdjuk.com/

Apr 27, 2010 | Pioneer CDJ-1000MK2 Turntable

1 Answer

45 and 33 sound slow


Here's a procedure for setting the tonearm...

Look up the recommended tracking force for your cartridge/stylus.

Unplug the power to the turntable and place it on a perfectly level surface.

Set the Tracking Force and AntiSkating to 0.
Using the tonearm elevation control, raise the tonearm.
Manually move the tonearm in toward the platter.
Manually rotate the platter Clockwise a few turns to disengage any cueing mechanisms.
Disengage the tonearm elevation control. The tonearm will either float or drop. This is why we have no power, just in case it hits the platter.
Adjust the counterweight until the tonearm floats exactly horizontal. Use the flat portion of the tonarm rest as a gauge.
Return the tonearm to its rest.
If you don't have a Stylus Tracking Force Gauge. Dial in the prescribed tracking force and a corresponding anti-skate reading. Play records.

May 04, 2009 | Audio Players & Recorders

1 Answer

Turntable wont spin


If everything seems ok with the power , there is usally a small microswitch that sends power to the motor when the tone arm is moved to the start of the record.
The switch might be bad or the lever that actuates it (connected to the tone arm) might be sticking. You may have to take the bottom cover off or remove the platter to see it.
Also make sure the belt is looped over the motor shaft. If the motor runs but the belt still doesnt turn, belt might be bad.

Mar 10, 2009 | Technics SL-BD22 Turntable

1 Answer

Turn on turntable the vinyl button doesnt wrk


This is a tough one. Sounds like physical damage. You'll need to take it to a service center for repair.


- OPTiC

Pioneer DJ Repair Videos
Pioneer DJ Repair
Pioneer DJ Parts
DJ Parts
DJ Equipment Sales
Audio Video Accessories

Feb 28, 2009 | Pioneer CDJ-800 Turntable

1 Answer

Problem with cdj1000 mk2


possible faulty cable to main display or small crack or d/j on pcb.
if you havent got it repaired then you can send it to us.

thanks.


http://www.audiovisualservices.info/

Oct 29, 2008 | Pioneer CDJ-1000MKII CD Player

1 Answer

Technics 1210 mk2 problem with pitch and lights


Check that your voltage settings are set correctly. This is located underneath your turntable platter. If you remove the slipmat, you will see 2 holes on the metal platter. Rotate the platter till you see the voltage switch, located @ the 9'o'clock position. Make sure it's set to your correct settings (N.America = 115V / Euro = 220V). If not, you will need a flat head screw driver to switch it. Before you switch it, make sure your unit is off and unplugged. After you swich it, it should be ok.

If your still having issues with the speed and the pop-up light, then there is something seriously wrong, and will need to be checked by a technician. Sometimes a resistor or IC will go bad, causing the speed issue, but for the pop-up light - that's usually faulty wiring generally caused by an incorrect replacement.

Did you buy this new or used? Have you had this serviced recently?

- TWEAK AV LAB
The ORIGINAL TURNTABLE Technicians

Nov 30, 2007 | Technics SL-1210 Turntable

Not finding what you are looking for?
Pioneer CDJ-1000MK2 Turntable Logo

664 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5017 Answers

John
John

Level 2 Expert

509 Answers

T-Comtech Repairs
T-Comtech Repairs

Level 2 Expert

417 Answers

Are you a Pioneer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...