Airconditioner Model ICES-003

E1 is an error with the coil temperature sensor

What is the make / model of your air conditioner. With out that information i cant help you with your ac repair problem. For assistance check us out at Tamarac Ac Company

E-5 with blower motor mechanism locked.Please rotate your blower motor manually, if it's hard, replace bearings or motor.

E-0 means communication error between indoor to remote.Replace new batteries in remote and try.

6 - DC Peak Error

• Supplied power is not normal

• Comp Connector (CN-U,V,W) is disconnected or inserted to wrong

position

• Compressor is damaged (coil short) ? replace compressor

• Too much Refrigerant
• Defect in outdoor pcb assembly ? replace pcb assembly


Try turning power off to external unit, usually resets diagnostics and runs OK. If not PCB external unit likely culprit, replace!

Something has exploded. Look inside to see what it was.

I have a Akai AC-GP10HRCI model portable air conditioner. We have lost the manual. It shows F8 on the display panel board and is not working at all. Please help. Thank you!!

blowing good but not cooling

Hi,Pls to shut - down the unit and try to power on ,may be its malfunction the control LCD.

THANX

Edgz

Hi,the E2 symbol its min Medium speed,they have the problem error of your PCB Board,please nearest aircon service center to repair the PCB Board.