Question about Aquabot In - Ground Robotic Pool Cleaner

1 Answer

How do I know if the fuse on my aquabot is blown? Can I tell by looking at it? there is power fron the GFI but the light on the transformer goes not come on when I flip the on switch. Help! MB

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Posted on Aug 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Amana PTAC PTC153B00AM has no power at all. It is wall plugged, but no lights come on on the board. It was working fine and showed no signs of going bad. Can this be a blown fuse or transformer?


Check the GFI plug where it plugs into the wall and reset it. Also, plug something else into that plug to make sure you didn't pop the circuit breaker

Aug 05, 2016 | Amana Heating & Cooling

1 Answer

2002 diplomat monaca moter home all lights work except the ones on the lower side of the side mirrors


Are you talking about the exterior lights or interior lights?

Exterior, look for a blown fuse.....interior (assuming the side of the mirror in the bathroom) look for a blown GFI......

Dec 12, 2015 | RVs

3 Answers

Charger won't charge just power light comes on no output!!


That looks pretty old to me. There can be several things wrong with it. It might have bad diodes, bad regulator or bad transformer. If you dont have test equipment, it will be hard to tell

Jan 19, 2013 | Cars & Trucks

1 Answer

Power doest not come on


Assuming ,that the outlet that you plugged your cd player in is working properlly.Try taking the cover to the cd player off. There should be a fuse, somewhere on the circuit board. Check to see if the fuse is blown.If it is replace the fuse, with the same type fuse. There should be writing on the metal part of the fuse,which will tell you the voltage,an amperage of the fuse. If it is blown, take the fuse to a Radio Shack store, they'll be able to match up the fuse for you. There might be more than one fuse, on the circuit board. Also,are you plugging the cd player into a G.F.I. outlet? The outlet could be tripped. If it is, hit the reset button.This should reset power to the outlet. There might be other outlet's that are wired into the G.F.I. If the G.F.I. is tripped then those outlet's won't work until you hit the reset button.

Jun 02, 2012 | Audio Players & Recorders

1 Answer

Aquabot wont pump or move, intermmittent


Well either you have a jammed up motor, or a bad motor, or the Controller unit has faulted.
http://www.robotshop.ca/PDF/aquabot-turbo-t2-manual.pdf
Above is a manual, this should help you it has exploded diagrams to help. There seem to be many ways that it could get tangled up, or maybe the belt has come off, any way it's about time to A: Get a screwdriver, or B: Call a service man....

Jun 01, 2010 | Aquabot Aquaproducts Automatic Swimming...

2 Answers

Powered Subwoofer repair--- Transformer issues?


Well yes transformers do fail and the transformer does say it has an internal fuse fitted which might have failed. The fuse on the board blowing is an indication of overload. The fact it didn't blow again shows that it is not getting any power or the fault has gone (doubtfull).
I doubt the transformer is a step up. But follow the circuit on the pc board till you come to electroytic capicator. This will have a voltage on it. The power level will be no more and perhaps less than the voltage on the capacitor. Another clue to the power level is if the secondary wires are narrower than those that go to the mains. That will indicate that less voltage comes out.
OK what to do. Well most makers say that the transformer is a safety item so it has to be replaced with the same type or one which is approved by the maker. So you can either contact the maker direct or find a service center, (for the brand) which might order you a replacement, or take the transformer to Radio Shack with details of the model number of the Sub, and see if they can get it for you. While there have a look at the multimeters. You should find one that will help you for all your future needs. I recomend one with a scale (rather than a digital). They are some around for £10 to £20 (I know you live in the USA but you can convert it) that will do what you might need it for.
The first thing to do if you get a meter is check with the ohm setting diodes or bridge rectifiers for shorts. IE: as if you had touch both probes together! Also do the same with any transitors you might find. As this could be the cause of the fuse blowing, and even the transformer's failure.

Mar 23, 2010 | Onkyo SKW-200 Subwoofer

1 Answer

No power, display lights nothing seems to light up, not sure, there is power in the unit though?


Check power into and out of the transformer. You should have either 115 or 230 VAC in and 24 VAC out. If no power out but power in, replace the transformer. If no power in look for tripped GFI, breaker, etc.

Dec 27, 2009 | Pentair Minimax NT Heater

1 Answer

I've got 2 additions to my house; power to both went out last week. I have a tick tracer that I want to use to isolate which line from my panel goes to those additions (bathrooms) and is causing the dead...


If you have power out in parts of your house, look for a breaker or breakers that is/are tripped or if you have a fuse box, look there for blown fuse.

If no breakers are tripped, there is the possibility that you have a GFI in the circuit. Look for the GFI (google GFI if you dont know what im talking about) and reset it.

If an amp probe is what I think it is, it measures the amount of current going through a particular wire at a particular moment. If your power is OFF, or if you are not using any power on a particular line, the reading will be zero. I think you might be wasting your time with this tool.

If I misunderstood your question, please ask me again so I can try to answer again.

Thanks

a

Oct 02, 2009 | Measuring Tools & Sensors

2 Answers

B&d hedge cutters not working


You probably tripped a breaker when you cut the wire. You may be plugged into a circuit that is also GFI protected. Check the breaker and reset if necessary. Also check the outlet (plug a light or something else to determine this) to assure there is power there. If the breaker is on and there is no power - start looking for a GFI. There should be a reset button the GFI (A GFI looks like a regular outlet only rectangular - it has a very sensitive trip device inside. A GFI can protect other ourlets ... so don't stop looking at the place you are plugged in.

Let me know if this helps

a

Let me know if this works for you

a

Sep 21, 2009 | Garden

1 Answer

Blown fuse


usually these step up transformers are design for one appliance at a time , let me know the brand and model number of transformer so I can get the specs info , does the stereo also shuts down?? let me know AJ

May 09, 2008 | Samsung DVD-V4600 DVD Player/VCR

Not finding what you are looking for?
Aquabot In - Ground Robotic Pool Cleaner Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aquabot Pool & Spa Experts

Robco Water
Robco Water

Level 2 Expert

239 Answers

The Cover Guy
The Cover Guy

Level 2 Expert

64 Answers

David Spradling
David Spradling

Level 3 Expert

5080 Answers

Are you an Aquabot Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...